Search Results
Window Felt Beltline Weatherstrips
p/n: 80-0174-57
This is a Standard material style replacement side window horizontal weatherstrip set (also known as beltline weatherstrip). This eight (8) piece set includes the inner and outer felt beltline weatherstrips for each side window and quarter window.
Vent Window Weatherstrip Set
p/n: 70-4073-55
This two (2) piece Vent Window Weatherstrip Set (pair) fits both driver and passenger doors of the vent window assemblies.
Front Door Weatherstrips
p/n: 20-0280-72
This Front Door Weatherstrip pair is the primary door to body weatherstrip. Contains plastic pins that are attached to the door weatherstrips and molded ends with metal cores.
Division Bar Glass Run Channels
p/n: 20-0239-58
This two (2) piece Division Bar Glass Run Channel pair installs between the front of door glass and the back of the vent window.
Hardtop Roof Rail Weatherstrips - Fastback
p/n: 20-0261-68
This Hardtop Roof Rail Weatherstrip pair is made of ozone resistant EPDM sponge rubber with molded A-pillar ends for a factory like fit. These high-quality weatherstrips fit on the roof of the vehicle and work to seal the side windows when the window is fully raised.
Rear Window Gasket
p/n: 20-0301-81
This Rear Window Gasket mounts around the full perimeter of the back glass and has properly molded corners for a precise, factory fit. It also has the slot to accommodate the outer edge's decorative molding.
Hood Bumper Set
p/n: 20-0210-42
This eight (8) piece Hood Bumper set is designed from the original parts for superior fitment and function.
Front Lower Control Arm Bumper
p/n: 20-0202-32
This Front Lower Control Arm Bumper is designed from the original part for superior fitment, finish, and function. This suspension bumper mounts to the front lower control arm to prevent metal to metal contact.
Inner Fender Dust Shields
p/n: 20-0221-44
This Inner Fender Dust Shield pair is designed from the original part for superior fitment and function. Filler shield pieces are die cut from quality masticated rubber to authentic original dimensions.
Quarter Window U Jamb Lock Pillar Filler
p/n: 20-0289-79
This Quarter Window U Jamb Lock Pillar Filler pair is designed from the original part for superior fitment and sealing. This part seals the bottom of the rear side window, and may also be known as a door jamb seal.. Fully molded authentic rubber construction with metal core.
Voltage Regulator Cover Shield
p/n: 70-4531-17
This Voltage Regulator Cover Shield is designed from the original part for superior fitment and function. This cover shield is located over and above the voltage regulator.
Body / Cowl to Fender Seals
p/n: 20-0222-44
This Body / Cowl to Fender Seals pair is designed from the original part for superior fitment and function. Filler seal pieces are die cut from quality masticated rubber to authentic original dimensions.
Hood to Cowl Weatherstrip
p/n: 20-0215-43
This Hood to Cowl Weatherstrip is designed from the original part for superior fitment and seal. An exact reproduction using the correct profile dense rubber extrusion.
Trunk Weatherstrip
p/n: 20-0302-84
This Trunk Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.
Splash Apron / A-Arm Dust Shield Filler
p/n: 70-3691-45
This two (2) piece Splash Apron / A-Arm Dust Shield Filler pair is designed from the original part for superior fitment and seal. Filler pieces are die cut from quality masticated rubber to authentic original dimensions. Left and Right pieces fit over suspension a-arms and inside front inner fenders.
Rear Bumper End Filler
p/n: 20-0235-47
This Rear Bumper End Filler pair is designed from the original part for superior fitment and usage. One (1) pair of direct fit stone shields per vehicle. This part fits between the vehicle body and rear bumper ends. For all except Wagons.
Accelerator pedal pad
p/n: 20-0678-40
Pedal, accelerator. Molded rubber design. Trucks (F100-200) after Serial #696,001.
Steering Column Lower Flange Insulator
p/n: 20-1532-88
This Steering Column Lower Flange Insulator is designed from the original part for superior fitment and function. This insulator fits around the lower steering column inside the vehicle to prevent metal to metal contact.
Air Deflector - At Radiator Core Support
p/n: 20-0193-31
This Air Deflector piece is designed from the original part for superior fitment and seal. Piece is die cut from quality masticated rubber to authentic original dimensions. This piece fits at the bottom of radiator core support to frame. Used on V8 models.
Radiator top seal
p/n: 20-0194-31
Seal, radiator support to bottom of radiator. "L" shaped. Twenty six and three eighths (26-3/8) inches long.
Radiator shroud seal
p/n: 20-0188-31
Seal, radiator side air deflector. Four (4) inch by fourteen and one eighth (14-1/8) inch.
Radiator top seal
p/n: 20-0184-31
Seal, top of radiator support to radiator. Twenty four (24) inches long.
Front Suspension Bumper
p/n: 20-0080-32
Bumper for front suspension upper arm. Measures three eighths (3/8) inch by sixteen (16) by eleven sixteenths with (11/16) inch bolt thread.
Hood to Fender Bumper Set
p/n: 20-0213-42
This Hood to Fender Bumper Set is a quality reproduction of the original factory part. These rubber bumpers attach to the front fender to support / cushion the hood closure.
Hood bumper
p/n: 20-0209-42
Bumper, hood on rear of fender. Rubber button tip only. Two (2) piece set.
Quarter Panel Drain Plugs
p/n: 20-2769-45
This Quarter Panel Drain Plug pair is a quality reproduction of the original factory part. These rubber plugs fit inside the quarter panel area to seal-out weather and environmental elements.
Hood Bumper, Adjustable
p/n: 70-2715-42
This Radiator Support to Hood Bumper is a quality replacement for the original factory part. This adjustable bumper attaches to the radiator support to cushion / stop the hood closure. Usually requires two (2) front bumpers each per vehicle.
Body Hole Plug
p/n: 20-1041-21
Plug, cowl and floor pan. This body plug covers a sheet metal hole that is one and one seven eighths (1-7/8) inch in diameter.
Door bumper
p/n: 20-0067-71
Bumper, door. Installs on back edge of door. Please check your car for quantities required.Usually two (2) to eight (8) per vehicle.
Door Bumper, Upper / Lower
p/n: 20-2825-71
This Door Bumper is a quality reproduction of the original factory part. Upper / Lower push-in type. Four (4) required per car.
Glovebox Arm Bumper Stop
p/n: 20-1399-88
Stop, glovebox arm.Ford Truck 1957-64 Stop, glovebox arm. Requires 2 each. Ford Cars 1955-68 Bumper, glovebox door check arm stop.
Body Hole Plug
p/n: 20-1039-21
Plug, cowl and floor pan. This body plug covers a sheet metal hole that is one and one fourth (1-1/4) inch in diameter.
Body Hole Plug
p/n: 20-1040-21
Plug, hole in dog leg cover. Installs at front of door where bolt to adjust vent window frame is located. This body plug covers a sheet metal hole that is one and one half (1-1/2) inch in diameter.
5/16" Glovebox Door Bumper
p/n: 33-0128-88
This 5/16" Glovebox Door Bumper is designed from the original part for superior fitment, finish and function. This bumper is commonly used as a glovebox door bumper on GM models.