Search Results
Window Felt Beltline Weatherstrip
p/n: 80-0464-57
Made from Original material. Side window horizontal seal (also known as beltline weatherstrip). These strips wipe the side windows when the glass is lowered.
Front Door Vent Window Weatherstrip Set
p/n: 70-3268-55
This front door vent window weatherstrip set is a four (4) piece set that contains the main vent window seals and division post seals. All of the pieces were designed from original parts for a precise, factory fit.
Front Door Weatherstrip
p/n: 60-0674-72
This Front Door Weatherstrip pair is designed from the original parts for superior fitment and seal. These primary door seals mount (push on) directly to the left and right doors sealing the full perimeter of the doors against the vehicle body when the door is closed.
Window Felt Weatherstrip
p/n: 80-0296-57
Side window horizontal seal (also known as beltline weatherstrip). These strips wipe the side windows when the glass is lowered. They come ready to install with finished ends.
Window Felt Outer Weatherstrip
p/n: 80-0297-57
Made from Standard material. Side window outer horizontal seal (also known as beltline weatherstrip). These strips wipe the side windows when the glass is lowered.
Engine Mounts - S/B Chevrolet
p/n: 70-1633-11
Engine Mounts, front pair. Three (3) bolt S/B Chevrolet. New replacement part manufactured to meet or exceed factory specifications.
Beltline Weatherstrips
p/n: 70-1121-61
Weatherstrip, outer beltline. For use on front, rear, and quarter windows without a chrome reveal molding at the window beltline. Available in 3ft pair.
Beltline Weatherstrip
p/n: 70-1120-61
Weatherstrip, outer beltline. For use on front, rear, and quarter windows without a chrome reveal molding at the window beltline. Available in 6ft lengths.
Beltline Weatherstrip
p/n: 70-0651-58
Rigid, rubber covered weatherstrip with flock lining and one fourth (1/4) inch chrome edge. Available in a 6ft piece.
Transmission Mount
p/n: 70-2058-25
Transmission mount, rear. One (1) required per vehicle. Aftermarket replacement type.
Body Bumper Kit
p/n: 90-0217-90
Body Bumper Kit - hood, door and trunk bumpers. Includes fourteen (14) pieces.
Peel-N-Stick Trunk Weatherstrip
p/n: 70-0774-WT
This trunk weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body. Easy to install 3M Peel-N-Stick backing provides superior adhesion for reliable performance.
Trunk Weatherstrip
p/n: 70-0774-84
This trunk weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.
Door Glass Run Channel
p/n: 70-4206-58
This flexible Glass Run Channel is designed from the original part for superior fitment and seal. This flexible window run channel is for the sides and top of door windows.
Brake pedal pad
p/n: 60-0710-22
Pad, brake pedal, slip over type. For vehicles with automatic transmission.
Splash Apron / A-Arm Dust Shield
p/n: 70-3500-45
This two (2) piece Splash Apron / A-Arm Dust Shield Filler set is designed from the original part for superior fitment and seal. Filler pieces are die cut from quality masticated rubber to authentic original dimensions. Pieces fit over suspension a-arms and inside front inner fenders.
Battery clamp cover
p/n: 70-0095-21
Cover, battery clamp. Control unsightly sulfate buildup. Help protect the nearby metal and finish. Good copy from original part.Length: 3.5 inches.
Hood to Cowl Weatherstrip
p/n: 70-2807-43
This hood-to-cowl weatherstrip is designed from the original part for superior fitment and seal. This seal mounts at the rear of the engine bay directly to the body.
Brake pedal pad
p/n: 60-0709-22
Pad, brake pedal, slip over type. Top quality reproduction. For manual transmission.
Masticated rubber sheet
p/n: 70-0645-45
Masticated sheet. Three thirty seconds (3/32) inch thick rubber sheet containing random milled cotton cord reinforcement for front end splash aprons, etc. This product is a four (4) foot wide roll, and will only be sold in four (4) square foot multiples
Door handle gasket kit
p/n: 60-0640-69
Gasket set, outside door handle. Six (6) piece set for two (2) doors.
Glovebox link bumper
p/n: 50-0367-88
Bumper, glove box check link. Fits on glove box door arm as needed.Length: .75 inches. Width: .5625 inches. Height: .3125 inches.
Door Weatherstrip w/ Clips (Sponge Rubber Extrusion - General Use)
p/n: 70-1245-73
Door edge weatherstrip made from high quality EPDM sponge rubber. Excellent for use on many different vehicle models. Available by the foot.
License Plate Light Lens Gasket
p/n: 70-3497-17
This License Plate Light Lens Gasket is designed from the original part for superior fitment and seal. This gasket fits between license plate light lens and housing.
Peel-N-Stick Trunk Weatherstrip
p/n: 70-0510-WT
Peel-N-Stick Trunk Weatherstrip made from high quality EPDM sponge rubber. Available by the foot.
Trunk Weatherstrip
p/n: 70-0346-85
Designed from an original part for a specific application but has many uses outside of its original purpose. Available by the foot.
Door Weatherstrip w/o Clips (Sponge Rubber Extrusion - General Use)
p/n: 70-1244-73
Door edge weatherstrip made from high-quality EPDM sponge rubber. Excellent for use on many different vehicle models. Available by the foot.
Trunk Weatherstrip
p/n: 70-0510-85
Designed from an original part for a specific application but has many uses outside of its original purpose. Available by the foot.
1/4" Universal mounting pad
p/n: 70-0308-17
Mounting pad, continuous for lights, hinges, brackets, and other bright work when no molded pad is available. Available by the foot.
2-1/4" Body Hole Plug
p/n: 35-0863-45
Plug, body sheet metal holes. Used in various places (like trunks). For one and one half (1-1/2) inch hole in body.
Door Bumper
p/n: 33-1227-71
Bumper, door edge, twin retainer style. Half (1/2) inch wide, seven eighths (7/8) inch long, and seven sixteenths (7/16) inch high.
1" Floor Pan Plug
p/n: 35-0262-20
Plug designed for floor pan, compartment and body. Up to 12 per car, as required.
Brake adjustment hole plug
p/n: 70-1092-24
Plug, brake adjustment hole. Fits five sixteenths (5/16) inch by one (1) inch slot. Most models with drum brakes.Length: 1.25 inches. Height: .875 inches.
5/16" Standard Bumper
p/n: 33-0128-88
Standard Bumper - Commonly used for fuel filler or glovebox doors.