Need Assistance?

We are here to help.

Call 800-447-0849

Search Results

52 items found matching 1968 Chevrolet Impala 2 door Convertible
Body Weatherstrip Kit

p/n: 90-3266-90

This kit includes the major weatherstrip components and some other essential parts needed for the body of your restoration project.

$1,304.20/set
$1,173.49/set
10% discount
Kit
Convertible Roof Rail Weatherstrip Set

p/n: 70-1685-65

This seven (7) piece Convertible Roof Rail Weatherstrip Set fits on the folding roof of the vehicle and seals the side window when the window is fully raised. Fully molded with top quality EPDM rubber and corrosion resistant brass metal cores.

$685.69/set
In Stock
Front Door Vent Window Set

p/n: 90-0425-90

This four (4) piece Front Door Vent Window Set contains the main vent window seals and division post seals. All of the pieces were designed from original parts for a precise, factory fit.

$268.20/set
$254.69/set
5% discount
Kit
Window Felt Weatherstrip

p/n: 80-0867-57

Original equipment style side window horizontal seal kit (also known as beltline weatherstrip). Eight (8) piece kit includes inner and outer felt beltline weatherstrip for each door and quarter windows.

$224.69/set
Allow 6-8 Weeks Ships Separately
Front Door Weatherstrip

p/n: 70-1764-72

Door edge weatherstrip. This part is the primary door to body weatherstrip.

$221.99/pr.
In Stock
Quarter window filler

p/n: 70-2048-67

Filler, quarter window weatherstrip, rear on inner panel. Hard to see part found at bottom of rear side window. Fully molded with metal core.Width: 2.

$202.69/pr.
In Stock
Front Door Vent Window Weatherstrips

p/n: 38-0091-55

These Front Door Vent Window Weatherstrips are the main seals needed to replace the rubber on your vent windows. They are designed and molded from original parts for superior fitment and seal.

$194.99/pr.
In Stock
Hinge Pillar Weatherstrip

p/n: 70-0763-63

Convertible hinge pillar weatherstrip - This seal is found between the windshield A-pillar post and the front door, and opposite the vent window. Seal is for 1965 early-type which is used with the roof rail set that has the front corners molded onto the side rail seals.

$177.69/pr.
In Stock
Door to Body Conduit, Power Window Wiring

p/n: 70-1538-70

This Door to Body Conduit set is designed from the original part for superior fitment and function. This is the sheathing conduit for the power windows wiring from the front door to the body through the hinge pillar.

$173.49/set
In Stock
Window Felt Weatherstrip

p/n: 80-0247-57

Made from Standard material. Side window horizontal seal (also known as beltline weatherstrip). These strips wipe the side windows when the glass is lowered.

$172.29/set
Allow 6-8 Weeks Ships Separately
Front Bow Weatherstrip

p/n: 70-1578-64

Weatherstrip, front bow to windshield.

$169.59/ea.
Made to Order Takes 5-7 Days
Window Felt Outer Weatherstrip

p/n: 80-0866-57

Original equipment style side window outer horizontal seal (also known as beltline weatherstrip). These strips wipe the side windows when the glass is lowered.

$149.19/set
Allow 6-8 Weeks Ships Separately
Axle rebound pad

p/n: 70-2071-32

Bumper, rear axle impact. Fully molded with new metal core.Width: 4.625 inches. Height: 1.875 inches.

$133.39/pr.
In Stock
Lock pillar filler

p/n: 70-0939-79

Door lock pillar seal. Longer type (4 -3/4"). This part seals the bottom of the rear side window, and may also be known as a door jamb seal. Fully molded authentic rubber construction with metal core.

$98.39/pr.
In Stock
Vent Window Division Post Run Channels

p/n: 70-0985-58

This Vent Window Division Post Run Channels pair installs on the backside of the vent window division post. Flexible run channel is flock lined with a molded-in upper bumper as original.

$81.99/pr.
In Stock
Beltline Weatherstrips

p/n: 70-1121-61

These Beltline Weatherstrips (sometimes called "scraper seal") come in a three (3) foot pair. For use on front, rear, and quarter windows without a chrome reveal molding at the window beltline. Available in 3ft pair.

$74.99/pr.
In Stock
Side window leading edge

p/n: 60-0683-80

Side window vertical leading edge weatherstrip. This part attaches to the vertical edge of the rear side windows when the rear side windows are fully raised. Molded authentic rubber construction with metal core, this part does not include the chrome piece

$73.19/pr.
In Stock
Vent division bar weatherstrip

p/n: 70-0843-56

Front vent window division post seal. Fully molded with metal core and attaching tabs.

$73.19/pr.
In Stock
Beltline Weatherstrip

p/n: 70-1120-61

This Beltline Weatherstrip comes in a six (6) foot length for the outer beltline (sometimes called "scraper seal"). For use on front, rear, and quarter windows without a chrome reveal molding at the window beltline. Available in 6ft lengths.

$69.39/ea.
In Stock
Beltline Weatherstrip Channel

p/n: 70-0651-58

This Beltline Weatherstrip Channel is a five (5) foot length of rigid channel with a flocked rubber lip and a flat stainless bead. Can be used as the inner beltline weatherstrip on front doors, rear doors and quarter windows.

$66.99/ea.
In Stock
Peel-N-Stick Trunk Weatherstrip

p/n: 70-0773-WT

This Peel-N-Stick Trunk Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.

$59.19/ea.
In Stock
Body Bumper Kit

p/n: 90-0211-90

This fourteen (14) piece Body Bumper Kit is designed from the original part for superior fitment, finish and function. Designed from originals and made from top quality rubber to ensure durability.

$61.90/set
$54.59/set
12% discount
Kit
Trunk Weatherstrip

p/n: 70-0773-84

This Trunk Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.

$47.29/ea.
In Stock
Splash Apron / A-Arm Dust Shield Set

p/n: 70-2511-45

This four (4) piece Splash Apron / A-Arm Dust Shield Filler set is designed from the original part for superior fitment and seal. Filler pieces are die cut from quality masticated rubber to authentic original dimensions. Pieces fit over suspension a-arms and inside front inner fenders.

$42.89/set
In Stock
Battery Clamp Cover

p/n: 70-0095-21

This black rubber Battery Clamp Cover helps to protect the nearby metal and finish. Good copy from an original part. Length: 3-1/2" inches.

$26.19/ea.
In Stock
Steering Column at Floor Seal

p/n: 70-3693-36

This Steering Column At Floor Seal is designed from the original part for superior fitment and sealing. Seal part is die cut from quality masticated rubber to authentic original dimensions. This part fits around the steering column to seal the column through the body floor pan.

$17.89/ea.
In Stock
Transmission Mount

p/n: 70-2058-25

This Transmission Mount is a new aftermarket replacement mount manufactured to meet or exceed factory specifications.. One (1) required per vehicle.

$16.89/ea.
In Stock
Masticated Rubber Sheet

p/n: 70-0645-45

This Masticated Rubber Sheet is three thirty seconds (3/32) inch thick. The rubber sheet contains random milled cotton cord reinforcement for front end splash aprons, etc.

$15.39/sqf
In Stock
Door Handle Gasket Set

p/n: 60-0640-69

This Door Handle Gasket Set is designed from the original part for superior fitment and seal. This six (6) piece gasket set will do two (2) doors.

$14.99/set
In Stock
Glovebox Link Bumper

p/n: 50-0367-88

Bumper, glove box check link. Fits on glove box door arm as needed.Length: .75 inches. Width: .5625 inches. Height: .3125 inches.

$11.39/ea.
In Stock
5/8" Door Weatherstrip with Clips

p/n: 70-1112-73

This Door Weatherstrip with Clips is made made from high quality EPDM sponge rubber. Excellent for use on many different vehicle models. Available by the foot.

$10.49/ft.
In Stock
13/16" Door Weatherstrip with Clips

p/n: 70-1245-73

This Door Weatherstrip is made from high quality EPDM sponge rubber. Excellent for use on many different vehicle models. Available by the foot.

$10.39/ft.
In Stock
License Plate Light Lens Gasket

p/n: 70-3497-17

This License Plate Light Lens Gasket is designed from the original part for superior fitment and seal. This gasket fits between license plate light lens and housing.

$9.39/ea.
In Stock
2-5/8" Run Channel Mohair Liner

p/n: 70-2863-58

Run channel liner helps reline guide bars on lock side of hardtops and convertibles. Available by the foot.

$9.29/ft.
In Stock
1-1/16" Trunk Weatherstrip

p/n: 70-0346-85

This Trunk Weatherstrip is designed from an original part for a specific application but has many uses outside of its original purpose. Available by the foot.

$8.99/ft.
In Stock
Peel-N-Stick Trunk Weatherstrip

p/n: 70-0510-WT

This Peel-N-Stick Trunk Weatherstrip is made from a high-quality EPDM sponge rubber. Available by the foot.

$8.99/ft.
In Stock
1" Trunk Weatherstrip

p/n: 70-0510-85

This Trunk Weatherstrip was designed from an original part for a specific application but has many uses outside of its original purpose. Available by the foot.

$8.49/ft.
In Stock
13/16" Door Weatherstrip without Clips

p/n: 70-1244-73

This Door Weatherstrip is made from high-quality EPDM sponge rubber. Excellent for use on many different vehicle models. Available by the foot.

$8.49/ft.
In Stock
2-1/4" Body Hole Plug

p/n: 35-0863-45

Plug, body sheet metal holes. Used in various places (like trunks). For one and one half (1-1/2) inch hole in body.

$8.29/ea.
In Stock
5/8" Door Weatherstrip without Clips

p/n: 70-1111-73

This Door Weatherstrip made from high-quality EPDM sponge rubber. Excellent for use on many different vehicle models. Available by the foot.

$7.99/ft.
In Stock
Door Bumper

p/n: 33-0981-71

This Door Bumper is designed from the original part for superior fitment, finish and function. Molded with push in carrot retainers, this bumper is commonly used as a upper door bumper on GM models.

$6.19/ea.
In Stock
Door or Tailgate Bumper

p/n: 33-1228-71

This fully molded 1/2” Door Bumper is quality reproduction of the original factory part. This rubber bumper attaches to the vehicle body to support / cushion the door closure. Usually requires two (2) bumpers each per vehicle.

$6.19/ea.
In Stock
1/4" Universal Mounting Pad

p/n: 70-0308-17

This 1/4" Universal Mounting Pad is continuous for use on lights, hinges, brackets, and other bright work when no molded pad is available. Available by the foot.

$5.29/ft.
In Stock
Door Bumper

p/n: 33-1227-71

This fully molded 7/16” Door Bumper is quality reproduction of the original factory part. This rubber bumper attaches to the vehicle body to support / cushion the door closure. Usually requires two (2) bumpers each per vehicle.

$5.29/ea.
In Stock
1" Floor Pan Plug

p/n: 35-0262-20

This Floor Pan Plug is fully molded and designed from the original part for superior fitment and seal. This plug is made from high-quality EPDM dense rubber to provide excellent durability. Up to twelve (12) used per vehicle.

$4.99/ea.
In Stock
3/4" Trunk Floor Pan Plug

p/n: 35-0070-87

This Trunk Floor Pan Plug is fully molded and designed from the original part for superior fitment and seal. This plug is made from high-quality EPDM dense rubber to provide excellent durability.

$4.79/ea.
In Stock
Hydraulic Pump Mounting Pad

p/n: 70-0946-67

This Hydraulic Pump Mounting Pad is designed from the original part for superior fitment and function. For folding top hydraulic pump mount. Special design to hold pump mounting bracket to floor pan. Four (4) pads needed per car. Height: 1" inch.

$4.69/ea.
In Stock
7/8" Trunk Bumper

p/n: 33-0293-87

This 7/8" Trunk Bumper is a quality reproduction of the original factory part. Self-retaining bumper is manufactured to OEM specifications to install for an authentic fit, finish, and function.

$4.19/ea.
In Stock
Brake Adjustment Hole Plug

p/n: 70-1092-24

Plug, brake adjustment hole. Fits five sixteenths (5/16) inch by one (1) inch slot. Most models with drum brakes.Length: 1.25 inches. Height: .875 inches.

$3.99/ea.
In Stock
Lock Cylinder Gasket

p/n: 60-0641-69

This Lock Cylinder Gasket is die cut from one-thirty-second (1/32) inch neoprene.

$3.59/ea.
In Stock