Hood to Cowl Weatherstrip
p/n: 70-1640-43
This Hood to Cowl Weatherstrip is designed from the original part for superior fitment and seal. This 38-1/2” long x 11/16” wide weatherstrip provides complete coverage.
Hood to Cowl Weatherstrip
p/n: 70-2341-42
This Hood to Cowl Weatherstrip is designed from the original part for superior fitment and seal. A proper extrusion approximately sixty-two (62) inches long with pre-installed fastener clips.
Hood to Cowl Weatherstrip
p/n: 70-2389-43
This Hood to Cowl Weatherstrip is designed from the original part for superior fitment and seal. This weatherstrip mounts at the rear of the engine bay directly to the body. Proper rubber cross section with pre-inserted attaching clips.
Hood to Cowl Weatherstrip
p/n: 20-0216-43
This Hood to Cowl Weatherstrip is designed from the original part for superior fitment and seal. An exact reproduction of the original Ford part using dense rubber with pre-installed fastener clips.
Hood to Cowl Weatherstrip
p/n: 70-2807-43
This Hood to Cowl Weatherstrip is designed from the original part for superior fitment and seal. This seal mounts at the rear of the engine bay directly to the body.
Hood to Cowl Weatherstrip
p/n: 70-4693-43
This Hood To Cowl Weatherstrip is designed from the original part for superior fitment and seal. An exact reproduction of the original profile. This weatherstrip installs at the rear of the engine bay to seal between the hood and vehicle body cowl.
Hood To Cowl Weatherstrip
p/n: 70-4835-43
This Hood To Cowl Weatherstrip is designed from the original part for superior fitment and seal. An exact reproduction of the original profile. This weatherstrip installs at the rear of the engine bay to seal between the hood and vehicle body cowl.
Hood To Cowl Weatherstrip
p/n: 82-0067-43
This Hood To Cowl Weatherstrip is designed from the original part for superior fitment and seal. An exact reproduction of the original profile. This weatherstrip installs at the rear of the engine bay to seal between the hood and vehicle body cowl.
Hood to Cowl Weatherstrip
p/n: 70-3924-43
This Hood to Cowl Weatherstrip has the proper rubber cross section and is made from top quality rubber to ensure durability and seal. Designed from the original part for a superior fitment and seal.
Hood to Cowl Weatherstrip with Ends Set
p/n: 70-3876-43
This Hood To Cowl Weatherstrip With Ends Set is a three (3) piece set of the center seal and two molded end pieces. Molded ends have brass cores for long life. Includes mounting pins.
Hood To Fender Bumper
p/n: 70-1836-42
This Hood To Fender Bumper is designed from the original part for superior fitment, finish and function. This bumper is manufactured with quality EPDM dense rubber and measures 1-7/16" x 11/16" inches.
Hood to Fender Bumper
p/n: 60-0542-42
This Hood to Fender Bumper set is a quality reproduction of the original factory part. These rubber bumpers attach to the front fender to support / cushion the hood closure.
Hood to Fender Bumper
p/n: 70-3305-42
This Hood to Fender Bumper is a quality reproduction of the original factory part. These rubber bumpers attach to the front fender to support / cushion the hood closure. Four (4) required per car.
Hood to Fender Bumper
p/n: 70-1963-42
This Hood to Fender Bumper is a quality reproduction of the original factory part. These rubber bumpers attach to the front fender to support / cushion the hood closure.
Hood to Fender Bumper
p/n: 70-1962-42
This Hood to Fender Bumper is a quality reproduction of the original factory part. These rubber bumpers attach to the front fender to support / cushion the hood closure. Four (4) required per car.
Hood to Fender Bumper Set
p/n: 20-0213-42
This Hood to Fender Bumper Set is a quality reproduction of the original factory part. These rubber bumpers attach to the front fender to support / cushion the hood closure.
Hood to Radiator Weatherstrip
p/n: 70-2372-43
Weatherstrip, hood to radiator. Proper rubber cross section with pre-drilled holes, cut outs and included attaching clips.Length: 50.75 inches.
Hood To Radiator Weatherstrip
p/n: 70-2377-43
Weatherstrip, hood to radiator. Proper rubber cross section with pre-drilled holes, cut outs and included attaching clips.
Hood, Door Or Liftgate Bumpers
p/n: 20-0907-71
This Hood, Door Or Liftgate Bumper pair is a quality reproduction of the original factory part.
Hood-To-Cowl Weatherstrip
p/n: 70-3294-43
This Hood-To-Cowl Weatherstrip attaches under cowl scuttle molding.
Hydraulic Pump Mounting Pad
p/n: 70-0946-67
This Hydraulic Pump Mounting Pad is designed from the original part for superior fitment and function. For folding top hydraulic pump mount. Special design to hold pump mounting bracket to floor pan. Four (4) pads needed per car. Height: 1" inch.
Inner Fender Splash Apron / Dust Shield Set
p/n: 70-4627-45
This twenty-two (22) piece Inner Fender Splash Apron / Dust Shield set is designed from the original part for superior fitment, function and sealing. Filler pieces are die cut from quality masticated rubber to authentic original dimensions.
Inner Fender to Cowl Filler Set
p/n: 70-3356-45
This six (6) piece Inner Fender to Cowl Filler set is designed from the original part for superior fitment and seal. Filler pieces are die cut from quality masticated rubber to authentic original dimensions. Pieces fit at rear of fender to cowl panel.
Instrument Bezel To Bezel Glass Seal
p/n: 70-4941-88
This Instrument Bezel To Bezel Glass Seal is designed from the original part for superior fitment and seal. This part seals the glass to the Instrument Panel / Bezel.
Instrument Panel Grommet
p/n: 70-1654-88
Grommet, instrument panel to windshield frame. Two (2) to six (6) required.Length: 1.3125 inches. Width: 1.0625 inches.
Kick Panel Hole Cover
p/n: 70-4536-45
This Kick Panel Hole Cover is designed from the original part for superior fitment and function. Cover is made from high-quality EPDM 80 durometer dense rubber to provide excellent durability and service.
Kick Panel Vent Gaskets
p/n: 70-4919-88
This Kick Panel Vent Gasket pair is designed from the original part for superior fitment and function. Can be used on trucks with or without A/C.
Large Stationary Quarter Window Weatherstrip
p/n: 70-4165-77
This Stationary Window Weatherstrip is designed from the original part for superior fitment and seal. This window weatherstrip fits between the stationary glass and vehicle body for larger quarter windows.
Leaf Spring to Shackle Bushings
p/n: 70-3344-35
This Leaf Spring To Shackle Bushing set is designed from the original part for superior fitment and function. This bushing installs into the leaf spring eye to fit between the rear shackle to leaf spring. This is a four (4) piece set for both rear leaf springs.
License Plate Light Lens Gasket
p/n: 70-3497-17
This License Plate Light Lens Gasket is designed from the original part for superior fitment and seal. This gasket fits between license plate light lens and housing.
License Plate Light or Heater Motor Wire Grommet
p/n: 20-1815-20
This License Plate Light or Heater Motor Wire Grommet is designed from the original part for superior fitment and function. This part functions as a License Plate Light Grommet(s) for Bronco and as a Heater Motor Wire Grommet for 1957-1958 Ford Car models.
Liftgate to Tailgate Weatherstrip
p/n: 70-4158-85
This Liftgate to Tailgate Weatherstrip reproduction is designed from the original part for superior fitment and seal. This liftgate seal mounts to the liftgate with screws (not included).
Liftgate Weatherstrip
p/n: 70-3008-84
This Liftgate - Upper Tailgate Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the liftgate with properly spaced plastic clips.
Lock Cylinder Gasket
p/n: 60-0641-69
This Lock Cylinder Gasket is die cut from one-thirty-second (1/32) inch neoprene.
Lower Door Weatherstrips
p/n: 70-2429-72
This Lower Door Weatherstrip pair is designed from the original parts for superior fitment and seal. These primary door weatherstrips mount (push pin) directly onto the vehicle front doors to seal against the body when closed.
Lower Sash Channel Filler, Door Glass
p/n: 20-0240-58
Channel, door window glass lower rubber. Front or rear doors. One (1) pair does two (2) windows.
Masticated Rubber Sheet
p/n: 70-0645-45
This Masticated Rubber Sheet is three-thirty seconds (3/32) inch thick. The rubber sheet contains random milled cotton cord reinforcement for front end splash aprons, etc.
Multi-Purpose Clips
p/n: 70-4802-45
A ten (10) piece set of Multi-Purpose Clips. Commonly used to retain Hood to Cowl Weatherstrips or Inner Fender Splash Panels.
Non-Functional Hood Scoop Seal
p/n: 20-2747-42
Non-Functional Hood Scoop Seal designed from the original part for superior fitment and seal. Installs behind the hood scoop grille and includes attaching fasteners.
Outer Fender To Inner Fender Gaskets
p/n: 70-4797-45
This Outer Fender To Inner Fender Gasket pair is designed from the original part for superior fitment and seal. Gaskets fit at the top of the left and right front fenders. Gasket pieces are die-cut from quality masticated rubber to authentic original OEM dimensions.
Outer Front Header Weatherstrip
p/n: 70-4834-68
This removable hardtop Outer Front Header Weatherstrip is designed from the original part for superior fitment and seal. This weatherstrip installs on the front of the shell with weatherstrip adhesive glue (not included) and presses against the cab weatherstrip. This single piece is for the double wall hardtop models.
Paint Gasket Set
p/n: 82-0027-44
This comprehensive nineteen (19) piece Paint Gasket Set includes the major seals and gaskets when painting or restoring a classic Camaro. These reproduction parts are designed from originals for superior performance, durability and a factory like fit.
Parking Brake Cable To Floor Seal
p/n: 20-0853-24
This Parking Brake Cable To Floor Seal is designed from the original part for superior fitment and seal. This works to seal the parking brake cable as it passes through the truck floor pan.
Parking Brake Pedal Pad
p/n: 70-4804-22
This reproduction Parking Brake Pedal Pad slips over the full perimeter of the pedal for a precise, factory fit. A perfect reproduction to replace a worn or damaged original pedal pad.
Parking Light Housing Gaskets
p/n: 20-0612-16
This Parking Light Lens Gasket pair is designed from the original part for superior fitment and seal. This reproduction gasket fits between the Parking Light Housing or Bezel and the body of the vehicle.
PCV valve grommet
p/n: 20-2695-20
Grommet, valve cover (Positive crankcase ventilation valve). Used in round hole with two notches. Fits either aluminum or steel valve covers.
PCV valve grommet
p/n: 20-2697-20
Grommet, valve cover (Positive crankcase ventilation valve). Used in D-shaped hole on steel valve covers.
PCV valve grommet
p/n: 20-2696-20
Grommet, valve cover (Positive crankcase ventilation valve). Used in round hole on steel valve covers.
Peel-N-Stick Trunk Decklid Weatherstrip
p/n: 20-2858-WT
This Peel-N-Stick Trunk Decklid Weatherstrip is designed for superior fitment and seal. The weatherstrip mounts around the full perimeter of the trunk decklid to seal directly to the body. Easy to install 3M Peel-N-Stick backing provides superior adhesion for reliable performance.
Peel-N-Stick Trunk Weatherstrip
p/n: 70-0774-WT
This Peel-N-Stick Trunk Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body. Easy to install 3M Peel-N-Stick backing provides superior adhesion for reliable performance.
Peel-N-Stick Trunk Weatherstrip
p/n: 70-0773-WT
This Peel-N-Stick Trunk Weatherstrip is designed from the original part for superior fitment and seal. The weatherstrip mounts around the full perimeter of the trunk directly to the body.
Peel-N-Stick Trunk Weatherstrip
p/n: 70-1438-WT
This Peel-N-Stick Trunk Weatherstrip is designed for superior fitment and seal. The weatherstrip mounts around the full perimeter of the trunk decklid to seal directly to the body. Easy to install 3M Peel-N-Stick backing provides superior adhesion for reliable performance.
Peel-N-Stick Trunk Weatherstrip
p/n: 70-0510-WT
This Peel-N-Stick Trunk Weatherstrip is made from a high-quality EPDM sponge rubber. Available by the foot.
Pickup tie down mounting pad
p/n: 20-0885-45
Pad, pickup box tie down hook. Eight (8) required per truck.
Plastic body filler
p/n: 70-2265-30
Rear bumper corner. Seals between body and bumper on each end. Fully molded with proper details of long lasting rubber. Replaces #1387314-5.
Prop Shaft Support Service
p/n: 70-1697-27
Bearing, propeller shaft, retainer. Revulcanization service only.Length: 5.125 inches. Height: 1.875 inches.
Prop shaft support service
p/n: 50-0510-27
Support, propeller shaft, bearing retainer. Revulcanization service only.