Search Results
Side Window Run Channel Kit
p/n: 20-0900-58
Kit, complete window anti-rattler. Deluxe kit for both doors. Kit includes: two (2) each of C7TZ-8121508, two (2) pair of D1TZ-8121452-53, and two (2) each of C7TZ-8121546-A.
Front Door Vent Window Weatherstrips
p/n: 20-0893-55
These front door vent window seals are designed from the original parts for superior fitment and seal. The pieces are molded as left and right and are one piece with the division post seal.
Windshield Gasket
p/n: 20-0803-50
This windshield gasket mounts around the full perimeter of the front glass and has properly molded corners for a precise, factory fit.
Windshield Gasket
p/n: 20-0890-50
This windshield gasket mounts around the full perimeter of the front glass and has properly molded corners for a precise, factory fit. It also has the slot to accommodate the outer edge's decorative molding.
Body mounting pad kit
p/n: 20-0889-48
Kit, cab to frame mounting. For 2 W/D (wheel drive) only. Thirty-six (36) piece set. Comes with instruction sheet. Set includes special washers, all bolts and nuts.
Window Felt and Run Channel Kit
p/n: 20-0899-58
Eight (8) piece set. Set includes run channel and beltline weatherstrip with stainless steel bead.
Side Window Run Channel Kit
p/n: 20-0898-58
Kit, complete window anti-rattler. Deluxe kit for both doors. Replaces factory #C7TZ-8121460-CA.
Radiator mounting pad kit
p/n: 20-0772-31
Pad kit, radiator support to frame. Fits 1973-76 F100 2-wheel drive, but will work for F250 through F350 but must add extra metal washers.
Rear Window Gasket
p/n: 20-0911-81
This rear window gasket is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the back glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation.
Rear Window Gasket
p/n: 20-0912-81
This rear window gasket is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the back glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation. It also has the slot to accommodate the outer edge's decorative molding.
Front Door Weatherstrip
p/n: 20-0908-72
This front door weatherstrip pair is designed from the original parts for superior fitment and seal. These door seals mount directly to the body to seal against the full perimeter of both the front left and front right doors.
Window Felt Weatherstrip
p/n: 80-0643-57
Original equipment style side window horizontal seal kit. Made with stainless steel bead. Kit includes inner and outer felt beltline weatherstrip for each door and quarter windows.
Window Felt Weatherstrip
p/n: 80-0644-57
Original equipment style side window horizontal seal kit. Made with black bead. Kit includes inner and outer felt beltline weatherstrip for each door and quarter windows.
Radius Arm & Axle Pivot Bushing Set
p/n: 20-0776-32
This Radius Arm and Axle Pivot Bushing Set is a quality reproduction of the original factory part(s). This six (6) piece kit includes two (2) each C5TZ-3B177-A, two (2) each C5TZ-3B203-C, and two (2) each C5TZ-3B203-B top quality bushings. Fits two-wheel (2WD) drive trucks.
1971 Ford Truck & Van Factory Shop Manual, CD
p/n: 07-1250-07
This FORD-Licensed Detroit Iron CD contains the most comprehensive set of digital OEM shop manuals. The factory manuals on this CD were professionally scanned from the original service and parts manuals.
Clutch Release Lever Boot
p/n: 20-0761-24
This Clutch Release Lever Boot is designed from the original part for superior fitment and seal. This boot is for the clutch release lever to clutch housing.
Axle rebound pad
p/n: 20-0647-32
Bumper, rear axle. Two (2) required per Truck. 1965-72: F100, F350 2 W/D (wheel drive), F100, F250 4 W/D (wheel drive).
Brake and clutch shank seal
p/n: 20-0758-23
Seal, clutch rod to floor. Useage: 1971-72: F100-350 series AFTER Serial #M00,001 1973-79: F100-350 series trucks
Spring shackle bushing kit
p/n: 20-0867-32
Kit, front of rear spring shackle. Enough for one spring.
Motor Mount
p/n: 20-0602-11
Rear motor mount. Useage: 1965-72: Fits F100, F250 4x2s Manual Trans. 8 cyl. 302, 352, 360, 390; F100, F250 4x2s Manual Trans. 8 cyl. 240, 300; F100, F250 all 6 cyl.
Brake and clutch shank seal
p/n: 20-0850-23
Seal, clutch rod to floor. Rubber with metal. Useage: 1968-71: F100-350 Series before Serial #M00,001.
Accelerator Pedal Pad
p/n: 20-1075-40
Pedal, accelerator. Includes chrome trim. Trucks (F100-350) before Serial # P60,001.
Motor Mount
p/n: 20-0834-11
Right hand motor mount. Useage: 1967-72: F100-350 Trucks with 352, 360, or 390 V8.
Splash Apron Fender Seal
p/n: 20-0877-44
Seals, front fender apron to cab mount strip. Made of high quality EPDM rubber and to the original design for a factory like fit.
Firewall to Hood Seal - Cowl Lacing
p/n: 20-0790-42
This Firewall to Hood Seal - Cowl Lacing is made of high quality EPDM rubber and to the original design for a factory like fit and appearance. Comes with pre-drilled mounting holes and mounting clips installed.
Fender Welting
p/n: 20-1591-44
This black Fender Welting is designed from the original part for superior fitment and seal. This welting material fits between the fenders and the vehicle body. Eight (8) foot length.
Side Marker Light Gaskets
p/n: 70-4335-17
This Side Marker Light Gasket set is designed as a premium upgrade over the original part for superior fitment and a highly finished look. Fully molded gaskets installs between the side marker and body when not using a chrome bezel.
Standard bumper
p/n: 20-0907-71
Bumpers, dual useage. Used on the rear of the hood for 1966-67: Fairlane & Ranchero. Used as a liftgate bumper for 1966-77: U-Series Bronco. Use on the door for 1967-72: F100-750 Series trucks.
Hood bumper
p/n: 20-0875-42
Bumpers, hood side. 1967-69 needs 1 pr. per truck, 1970-72 needs 2 pr. per truck.
Radius Arm Bushing
p/n: 20-0671-36
Radius Arm Bushing - At Frame end of Radius Rod 4-Wheel Drive. Requires two (2) bushings per side with four (4) per vehicle.
Taillight lens gasket
p/n: 20-0837-15
Gaskets, taillight lens. Rectangular type. For style-side trucks.
Door Hinge Seal Set
p/n: 20-0909-73
This four (4) piece Door Hinge Seal set is designed from the original part for superior fitment and seal. This Door hinge to door seal set is for both doors.