Search Results
Rear Window Gasket
p/n: 20-0825-81
This rear window gasket is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the back glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation.
Rear Window Gasket
p/n: 20-0826-81
This Rear Window Gasket is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the back glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation.
Side Window Run Channel Kit
p/n: 20-0814-58
Kit, complete window anti-rattler. Deluxe kit for both doors.
Windshield Gasket
p/n: 20-0804-50
This windshield gasket mounts around the full perimeter of the front glass and has properly molded corners for a precise, factory fit. It also has the slot to accommodate the outer edge's decorative molding.
Windshield Gasket
p/n: 20-0803-50
This windshield gasket mounts around the full perimeter of the front glass and has properly molded corners for a precise, factory fit.
Cab To Frame Mounting Pad Set
p/n: 20-0802-48
This thirty-six (36) piece Cab to Frame Mounting Pad set is designed from the original parts for superior fitment and function.
Front Door Vent Window Weatherstrips
p/n: 20-0809-55
These front door vent window seals are designed from the original parts for superior fitment and seal. The pieces are molded as left and right and are one piece with the division post seal.
Window Felt Weatherstrip
p/n: 80-0645-57
Original equipment style side window horizontal seal kit (also known as beltline weatherstrip). Kit includes inner and outer felt beltline weatherstrip for each door and quarter windows.
Stationary quarter window seal
p/n: 20-0822-77
Seal, stationary quarter window. Models WITH Stainless molding.
Stationary quarter window seal
p/n: 20-0821-77
Seal, stationary quarter window. Models WITHOUT Chrome.
Fender welting 3/16 bead 50ft
p/n: 70-1100-44
Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide, three sixteenths (3/16) inch, fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty fi
Door Weatherstrip
p/n: 70-2430-72
This door gasket weatherstrip is the primary door to body weatherstrip. These gaskets mount directly to the body pinchweld seam to seal against the full perimeter of both the front left and front right doors.
1974 Ford Truck & Van Factory Shop Manual, CD
p/n: 07-1253-07
This FORD-Licensed Detroit Iron CD contains the most comprehensive set of digital OEM shop manuals. The factory manuals on this CD were professionally scanned from the original service and parts manuals.
Rigid Run Channel
p/n: 20-0813-58
Channel, rigid division bar run. For front edge of door glass. Two (2) required per truck. Use for either right or left side.
Clutch Release Lever Boot
p/n: 20-0761-24
This Clutch Release Lever Boot is designed from the original part for superior fitment and seal. This boot is for the clutch release lever to clutch housing.
Axle rebound pad
p/n: 20-0647-32
Bumper, rear axle. Two (2) required per Truck. 1965-72: F100, F350 2 W/D (wheel drive), F100, F250 4 W/D (wheel drive).
Flexible Run Channel
p/n: 20-0812-58
Channel, door glass flexible run. Either Right or Left Side. Top & back side of door glass. Two (2) required per truck.
Brake and clutch shank seal
p/n: 20-0758-23
Seal, clutch rod to floor. Useage: 1971-72: F100-350 series AFTER Serial #M00,001 1973-79: F100-350 series trucks
Fender welting 3/16 bead 25ft
p/n: 70-1099-44
Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide, three sixteenths (3/16) inch, twenty five (25) foot roll. Typially used for attaching two (2) fenders to body. For f
Gearshift Knob
p/n: 20-0763-24
This black column shift lever Gearshift Knob is designed from the original part for a superior fit and finish. This reproduction part is a direct screw on replacement for that broken, aged-out original knob.
Motor Mount
p/n: 20-0602-11
Rear motor mount. Useage: 1965-72: Fits F100, F250 4x2s Manual Trans. 8 cyl. 302, 352, 360, 390; F100, F250 4x2s Manual Trans. 8 cyl. 240, 300; F100, F250 all 6 cyl.
Splash Apron Fender Seal
p/n: 20-0877-44
Seals, front fender apron to cab mount strip. Made of high quality EPDM rubber and to the original design for a factory like fit.
Firewall to Hood Weatherstrip - Cowl Lacing
p/n: 20-0790-42
This Firewall to Hood Weatherstrip is made of high quality EPDM dense rubber and to the original design for a factory like fit and appearance. Comes with pre-drilled mounting holes and mounting clips installed.
Fender Welting
p/n: 20-1591-44
This black Fender Welting is designed from the original part for superior fitment and seal. This welting material fits between the fenders and the vehicle body. Eight (8) foot length.
Turn signal light gasket
p/n: 20-0749-16
Gaskets, side marker light. Front and rear. Four (4) piece set.
Radius Arm Bushing
p/n: 20-0671-36
Radius Arm Bushing - At Frame end of Radius Rod 4-Wheel Drive. Requires two (2) bushings per side with four (4) per vehicle.
Brake pedal pad
p/n: 20-0757-22
Pad, brake pedal.1973-79: F100-350 series with manual or automatic transmission. 1980-89: F100/350 series with automatic transmission.
Body hole plug
p/n: 20-0764-24
Plug, fill hole. Used where clutch rod goes on standard transmission.
Windshield Molding Joint Cover w/ Wide Moldings
p/n: 70-4483-52
This Windshield Molding Joint Cover is designed from the original part for superior fitment and usage. This made from Stainless Steel piece covers the molding joint where the Windshield rubber comes together.
Firewall grommet
p/n: 20-0753-20
Grommets, firewall. Five eighths (5/8) inch outside diameter. One (1) each on both sides of firewall.