Fuel Filler Neck Gasket
p/n: 70-4920-39
This Fuel Filler Neck Gasket is designed from the original part for superior fitment and seal. Machine stamped from quality materials to authentic original dimensions.
Fuel Filler Pipe To Trunk Floor Seal
p/n: 20-2739-41
This Fuel Filler Pipe To Trunk Floor Seal is designed from the original part for superior fitment and seal. This part fits around the vehicles fuel filler pipe between the filler pipe and the trunk floor.
Fuel Neck Grommet
p/n: 70-2284-41
This Fuel Filler Neck Grommet is designed from the original part for superior fitment and seal. This grommet fits around the vehicles fuel filler neck between the filler neck and vehicle body. Fully molded out of gasoline resistant BUNA high quality rubber.
Fuel Tank Mounting Isolator Set
p/n: 70-4628-41
This six (6) piece Fuel Tank Mounting Isolator Set is a reproduction of the original style fuel tank isolator set. Replacing or adding the isolator strips and pads can help eliminate noise or friction between the fuel tank straps and the body.
Gearshift Knob
p/n: 20-0763-24
This black column shift lever Gearshift Knob is designed from the original part for a superior fit and finish. This reproduction part is a direct screw on replacement for that broken, aged-out original knob.
Glass Run Channel - Vent Window Delete
p/n: 70-3891-58
This Glass Run Channel pair is for applications where the vent window has been eliminated. One pair fits both driver (Left) and passenger (Right) side doors.
Glovebox Link Bumper
p/n: 50-0367-88
This Glovebox Link Bumper is made to original specifications for an authentic fit and appearance. The glovebox check link bumper fits on the glovebox door arm.
Hardtop Front Roof Rail Weatherstrip
p/n: 70-3153-68
This hardtop front roof rail weatherstrip pair is made of high-quality EPDM rubber with fully molded ends for a factory like fit. These seals fit on the roof of the vehicle and work to seal the side windows when the window is fully raised.
Hardtop Rear Roof Rail Weatherstrip
p/n: 70-3152-68
This hardtop rear roof rail weatherstrip pair is made of high-quality EPDM rubber with fully molded ends for a factory like fit. These seals fit on the roof of the vehicle and work to seal the side windows when the window is fully raised.
Hardtop Roof Rail Weatherstrip
p/n: 82-0036-68
Hardtop roof rail weatherstrip. This part fits on the roof of the vehicle and seals the side window when the window is fully raised.
Hardtop Roof Rail Weatherstrip
p/n: 70-2019-68
Hardtop roof rail weatherstrip. Rear door. This part fits on the roof of the vehicle and seals the side window when the window is fully raised.
Hardtop Roof Rail Weatherstrip
p/n: 20-2823-68
Hardtop roof rail weatherstrip. This part fits on the roof of the vehicle and seals the side window when the window is fully raised.
Hardtop Roof Rail Weatherstrip
p/n: 20-1166-68
Hardtop roof rail weatherstrip. This part fits on the roof of the vehicle and seals the side window when the window is fully raised.
Hardtop Roof Rail Weatherstrip
p/n: 70-1664-68
Hardtop roof rail weatherstrip. This part fits on the roof of the vehicle and seals the side window when the window is fully raised.
Hardtop Roof Rail Weatherstrip
p/n: 70-1883-68
This Hardtop Rear Roof Rail Weatherstrip pair fits on the roof of the vehicle and seals the side window when the window is fully raised. Retainer clips are included.
Hardtop Roof Rail Weatherstrip
p/n: 82-0034-68
These molded roof-rail seals pair are designed from the original parts for superior fitment and seal. This part fits on the roof of the vehicle and seals the side window when the window is fully raised. Fits General Motors A-Body Style 57 Hardtop-Coupes with no quarter windows.
Hardtop Roof Rail Weatherstrip
p/n: 70-1882-68
Hardtop roof rail weatherstrip. This part fits on the roof of the vehicle and seals the side window when the window is fully raised.
Hardtop Roof Rail Weatherstrips
p/n: 82-0012-68
This Hardtop Roof Rail Weatherstrip pair is made of ozone resistant EPDM sponge rubber with fully molded A pillar ends and corners for a factory like fit. These high quality seals fit on the roof of the vehicle and work to seal the side windows when the window is fully raised.
Hardtop Roof Rail Weatherstrips
p/n: 20-2818-68
This Hardtop Roof Rail Weatherstrip pair fits on the roof of the vehicle and seals the side window when the window is fully raised. Includes attaching screws. For vehicles without T-Tops.
Hardtop Roof Rail Weatherstrips
p/n: 70-1001-68
This Hardtop Roof Rail Weatherstrip pair is made of ozone resistant EPDM sponge rubber with molded A pillar ends for a factory like fit. These high-quality weatherstrips fit on the roof of the vehicle and work to seal the side windows when the window is fully raised.
Hardtop Roof Rail Weatherstrips
p/n: 82-0086-68
This Hardtop Roof Rail Weatherstrip pair fits on the roof of the vehicle and seals the side window when the window is fully raised.
Hardtop Roof Rail Weatherstrips
p/n: 82-0209-68
This Hardtop Roof Rail Weatherstrip pair is made of high-quality EPDM rubber with molded ends for a factory like fit. This part fits on the roof of the vehicle and seals the side window when the window is fully raised. For models with stationary (fixed) rear quarter windows.
Hardtop Roof Rail Weatherstrips
p/n: 70-1621-68
This Hardtop Roof Rail Weatherstrip pair fits on the roof of the vehicle and seals the side window when the window is fully raised.
Hardtop Roof Rail Weatherstrips
p/n: 82-0048-68
This Hardtop Roof Rail Weatherstrip pair is made of ozone resistant EPDM sponge rubber with molded A pillar ends and corners for a factory like fit. These high-quality weatherstrips fit on the roof of the vehicle and work to seal the side windows when the window is fully raised.
Hardtop Roof Rail Weatherstrips
p/n: 70-3271-68
This Hardtop Roof Rail Weatherstrip pair is made of ozone resistant EPDM sponge rubber with molded A pillar ends and corners for a factory like fit. These high-quality weatherstrips fit on the roof of the vehicle and work to seal the side windows when the window is fully raised.
Hardtop Roof Rail Weatherstrips
p/n: 20-1167-68
This Hardtop Roof Rail Weatherstrip fits on the roof of the vehicle and work to seal the side windows when the window is fully raised.
Hardtop Roof Rail Weatherstrips
p/n: 82-0047-68
This Hardtop Roof Rail Weatherstrip pair is made of ozone resistant EPDM sponge rubber with molded A pillar ends and corners for a factory like fit. These high-quality weatherstrips fit on the roof of the vehicle and work to seal the side windows when the window is fully raised.
Hardtop Roof Rail Weatherstrips
p/n: 82-0210-68
This Hardtop Roof Rail Weatherstrip pair is made of high-quality EPDM rubber with molded ends for a factory like fit. This part fits on the roof of the vehicle and seals the side window when the window is fully raised. For models with movable rear quarter windows.
Hardtop Roof Rail Weatherstrips
p/n: 70-1879-68
This Hardtop Roof Rail Weatherstrip pair is made of ozone resistant EPDM sponge rubber with molded A-pillar ends and corners for a factory like fit. These high-quality weatherstrips fit on the roof of the vehicle and work to seal the side windows when the window is fully raised.
Hardtop Roof Rail Weatherstrips
p/n: 70-2146-68
This Hardtop Roof Rail Weatherstrip pair fits on the roof of the vehicle and seals the side window when the window is fully raised.
Hardtop Roof Rail Weatherstrips
p/n: 60-0722-68
This Hardtop Roof Rail Weatherstrip pair fits on the roof of the vehicle and seals the side window when the window is fully raised.
Hardtop to Body Header Weatherstrip
p/n: 70-4891-68
This removable Hardtop to Body Header Weatherstrip is designed from the original part for superior fitment and sealing. Weatherstrip mounts on the top of the body and seals against the front of the shell with weatherstrip adhesive glue (not included).
Hardtop to Body Side Weatherstrips
p/n: 70-4892-68
This removable Hardtop to Body Side Weatherstrip pair is designed from the original part for superior fitment and sealing. Weatherstrips mount on the driver and passenger side body rail of the hardtop shell with weatherstrip adhesive glue (not included).
Hatchback Weatherstrip
p/n: 70-3561-84
This Hatchback Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the hatch opening directly to the body.
Hatchback Weatherstrip
p/n: 82-0102-84
This Hatchback Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the hatch opening directly to the body.
Header Bow Weatherstrip - Hardtop
p/n: 70-3944-64
This Header Bow Weatherstrip is the top and front seal rubber across windshield header for hardtops. Fully molded with the proper as original cross section.
Headlight dimmer switch pad
p/n: 70-0930-14
Pad, headlight dimmer switch. Rubber slip-over cover for floor mounted switch.
Heat and Sound Insulator Underlayment
p/n: 70-4676-88
This single piece die-cut Heat and Sound Insulator Underlayment for floors lays under the carpeting's felt mat. This underlayment will decrease road noise and decrease heat inside the trucks interior compartment. Pre-cut and ready to be installed into your vehicle to improve driving comfort.
Hinge Pillar Weatherstrips
p/n: 70-1562-63
This Convertible A Post Hinge Pillar Weatherstrip pair attaches to the body and seals between the A-pillar post and the front section of the door or vent window frame when the door is closed.
Hood bumper
p/n: 70-2876-42
Bumper, hood adjustable, rear. Slip-over rubber cover for threaded stud that mounts on both sides of cowl.
Hood bumper
p/n: 70-3377-42
Bumper, hood-to-fender. Slides into slot on fender flange. Four (4) required per car.
Hood bumper
p/n: 70-2871-42
Bumper, hood, front adjustable. Bumper threads into radiator support on left and right side. Two (2) required per car.
Hood Bumper Cap
p/n: 70-1651-42
This Hood Bumper Cap is fully molded and designed from the original part for superior fitment and seal. Slip-over style application.
Hood Side Bumpers
p/n: 20-0791-42
A four (4) piece Hood Side Bumper set that is manufactured to OEM specifications to install for an authentic fit, finish, and function. Reproduction bumpers designed from the original part.
Hood to Cowl Weatherstrip
p/n: 70-4280-43
This Hood to Cowl Weatherstrip is designed from the original part for superior fitment and seal. An exact reproduction of the original profile. This seal mounts at the rear of the engine bay to seal between the hood and vehicle body cowl.
Hood to Cowl Weatherstrip
p/n: 70-3563-42
This Hood to Cowl Weatherstrip is designed from the original part for superior fitment and seal. An exact reproduction using the correct profile extrusion and pre-installed fastener clips.
Hood to Cowl Weatherstrip
p/n: 70-3146-42
This three (3) piece Hood To Cowl Weatherstrip is designed from the original part for superior fitment and seal. An exact reproduction of the original profile. This weatherstrip set installs at the rear of the engine bay to seal between the hood and vehicle body cowl.
Hood to Cowl Weatherstrip
p/n: 70-3350-42
This Hood to Cowl Weatherstrip is designed from the original part for superior fitment and seal. An exact reproduction using the correct profile dense rubber extrusion and pre-installed fastener clips.
Hood to Cowl Weatherstrip
p/n: 70-3541-42
Cowl top panel to hood seal. Sixty-seven and seven eighths' inches (67-7/8") long. Fully molded rubber with fifteen (15) metal clips installed along perimeter of weatherstrip.
Hood to Cowl Weatherstrip
p/n: 70-1253-42
This Hood To Cowl Weatherstrip is designed from the original part for superior fitment and seal. This weatherstrip mounts at the rear of the engine bay directly to the body. Seventy-two (72") inches OAL and includes fifteen (15) 70-1255-42 plastic clips for installation.
Hood to Cowl Weatherstrip
p/n: 70-3924-43
This Hood to Cowl Weatherstrip has the proper rubber cross section and is made from top quality rubber to ensure durability and seal. Designed from the original part for a superior fitment and seal.
Hood to Cowl Weatherstrip
p/n: 70-4704-43
This Hood to Cowl Weatherstrip is designed from the original part for superior fitment and seal. An exact reproduction of the original profile. This weatherstrip installs at the rear of the engine bay to seal between the hood and vehicle body cowl.
Hood to Fender Bumper
p/n: 82-0022-42
This single molded Hood to Fender Bumper is a quality reproduction of the original factory part. This rubber bumper attaches to the front fender to support / cushion the hood closure. Usually requires four (4) bumpers each per vehicle.
Hood to Fender Bumper
p/n: 70-4176-42
This Hood to Fender Bumper is a quality reproduction of the factory part. This rubber bumper attaches to the front fender to support or cushion the hood closure. Usually requires four (4) bumpers each per vehicle.
Hood to Fender Bumper Set
p/n: 20-0213-42
This Hood to Fender Bumper Set is a quality reproduction of the original factory part. These rubber bumpers attach to the front fender to support / cushion the hood closure.
Hood to Radiator Weatherstrip
p/n: 70-4889-43
This Hood to Radiator Weatherstrip is designed from the original part for superior fitment and seal. An exact reproduction of the original profile. This weatherstrip installs at the front of the engine bay to seal between the radiator support / grill and seals against the hood.
Hood to Radiator Weatherstrip
p/n: 70-2379-43
Weatherstrip, hood to radiator. Proper rubber cross section with pre-drilled holes, cut outs and included attaching clips.Length: 51.25 inches.
Hood Weatherstrip Clip
p/n: 70-1255-42
Clip, hood to cowl weatherstrip. Normal usage is fourteen (14) to sixteen (16) per car as needed.
Hood, Door Or Liftgate Bumpers
p/n: 20-0907-71
This Hood, Door Or Liftgate Bumper pair is a quality reproduction of the original factory part.
Hydraulic Pump Mounting Pad
p/n: 70-0946-67
This Hydraulic Pump Mounting Pad is designed from the original part for superior fitment and function. For folding top hydraulic pump mount. Special design to hold pump mounting bracket to floor pan. Four (4) pads needed per car. Height: 1" inch.
Instrument Bezel To Bezel Glass Seal
p/n: 70-4941-88
This Instrument Bezel To Bezel Glass Seal is designed from the original part for superior fitment and seal. This part seals the glass to the Instrument Panel / Bezel.
Instrument Panel Grommet
p/n: 70-1654-88
Grommet, instrument panel to windshield frame. Two (2) to six (6) required.Length: 1.3125 inches. Width: 1.0625 inches.
Left (Driver's Side) Rear Cargo Door Weatherstrip
p/n: 82-0199-72
This Left Rear Cargo Door Weatherstrip is designed from the original part for superior fitment and sealing. This peel-n-stick weatherstrip is for the left (driver's side) cargo door at the rear of the van.
License Plate Light or Heater Motor Wire Grommet
p/n: 20-1815-20
This License Plate Light or Heater Motor Wire Grommet is designed from the original part for superior fitment and function. This part functions as a License Plate Light Grommet(s) for Bronco and as a Heater Motor Wire Grommet for 1957-1958 Ford Car models.
Liftgate to Tailgate Weatherstrip
p/n: 70-4158-85
This Liftgate to Tailgate Weatherstrip reproduction is designed from the original part for superior fitment and seal. This liftgate seal mounts to the liftgate with screws (not included).
Liftgate Weatherstrip
p/n: 70-3477-84
This Liftgate Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the liftgate opening directly to the body.
Liftgate Weatherstrip
p/n: 70-4819-85
This Tailgate Lower Weatherstrip reproduction is designed from the original part for superior fitment and seal. This weatherstrip mounts on the liftgate and seals against the body when the liftgate is closed.
Liftgate Weatherstrip
p/n: 70-3008-84
This Liftgate - Upper Tailgate Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the liftgate with properly spaced plastic clips.
Liftgate Weatherstrip
p/n: 70-3509-85
This Liftgate Weatherstrip is designed from the original part for superior fitment and seal. The weatherstrip mounts around the full perimeter of the rear liftgate opening directly to the body.
Lock Cylinder Gasket
p/n: 60-0641-69
This Lock Cylinder Gasket is die cut from one-thirty-second (1/32) inch neoprene.