Side Window Run Channel and Beltline Set
p/n: 70-2150-58
This eight (8) piece Side Window Run Channel and Beltline Set includes the Left and Right side run channels and Inner / Outer window felt beltline weatherstrips for the Front door windows of the vehicle.
Side Window Vertical Leading Edge Weatherstrips
p/n: 70-1810-80
This quarter to side window Vertical Leading Edge Weatherstrip pair is designed from the original part for superior fitment and seal. This part attaches to the vertical edge of the rear side windows when the rear side windows are fully raised.
Side Window Vertical Leading Edge Weatherstrips
p/n: 70-1820-80
This quarter to side window Vertical Leading Edge Weatherstrip pair is designed from the original part for superior fitment and seal. This part attaches to the vertical edge of the rear side windows when the rear side windows are fully raised.
Side Window Vertical Leading Edge Weatherstrips
p/n: 70-0926-80
This quarter to side window Vertical Leading Edge Weatherstrip pair is designed from the original part for superior fitment and seal. This part attaches to the vertical edge of the rear side windows when the rear side windows are fully raised.
Side Window Vertical Leading Edge Weatherstrips
p/n: 70-0882-80
This quarter to side window Vertical Leading Edge Weatherstrip pair is designed from the original part for superior fitment and seal. This part attaches to the vertical edge of the rear side windows when the rear side windows are fully raised.
Side Window Weatherstrip Set
p/n: 20-0814-58
This eight (8) piece Side Window Weatherstrip Set is designed from the original part for superior fitment and function. The set comes ready to install and does both front doors.
Side Window Weatherstrip Set
p/n: 70-4479-58
This comprehensive, twelve (12) piece, Side Window Weatherstrip set is designed from the original part for superior fitment and seal. The "anti-rattler" set includes the back edge of vent window seal installed, window felt beltline weatherstrips, door glass runs with rivets and vent bar channel.
Slider Door weatherstrip
p/n: 82-0198-72
Slider door edge weatherstrip. Models with passenger side sliding doors. Proper extrusion for perimeter seal.
Splash Apron / A-Arm Dust Shield
p/n: 70-3058-45
This two (2) piece Splash Apron / A-Arm Dust Shield Filler set is designed from the original part for superior fitment and seal. Filler pieces are die cut from quality masticated rubber to authentic original dimensions. Pieces fit over suspension a-arms and inside front inner fenders.
Splash Apron / A-Arm Dust Shield
p/n: 70-3316-45
This two (2) piece Splash Apron / A-Arm Dust Shield Filler set is designed from the original part for superior fitment and seal. Filler pieces are die cut from quality masticated rubber to authentic original dimensions. Pieces fit over suspension a-arms and inside front inner fenders.
Splash Apron / A-Arm Dust Shield Filler Set
p/n: 70-2773-45
This six (6) piece Splash Apron / A-Arm Dust Shield Filler set is designed from the original part for superior fitment and seal. Filler pieces are die cut from quality masticated rubber to authentic original dimensions. Pieces fit over suspension a-arms and inside front inner fenders.
Splash Apron / A-Arm Dust Shield Filler Set
p/n: 70-2775-45
This four (4) piece Splash Apron / A-Arm Dust Shield Filler set is designed from the original part for superior fitment and seal. Filler pieces are die cut from quality masticated rubber to authentic original dimensions. Pieces fit over suspension a-arms and inside front inner fenders.
Splash Apron / A-Arm Dust Shield Fillers
p/n: 70-3483-45
This two (2) piece Splash Apron / A-Arm Dust Shield Filler pair is designed from the original part for superior fitment and seal. Filler pieces are die cut from quality masticated rubber to authentic original dimensions. Left and Right pieces fit over suspension a-arms and inside front inner fenders.
Splash Apron Fender Seal
p/n: 20-0877-44
This Splash Apron Fender Seal pair installs from the inner fender panel to the firewall. Made of high quality EPDM rubber and to the original design for a factory like fit.
Stabilizer Bar Bushings
p/n: 70-4678-34
This Stabilizer Bar to Frame Bushing pair may fit either front or rear stabilizer / sway bars depending on the vehicle. Manufactured with quality materials to original specifications.
Stabilizer Bar End Link
p/n: 20-0782-33
This Front Stabilizer Bar End Link is used to smooth the transfer between the sway bar and the control arm. Two (2) end links required per truck. For 4x2 (2 wheel drive) models.
Stabilizer Bar End Link Repair Set
p/n: 20-0783-33
This five (5) piece Stabilizer Bar End Link Repair Set is for the front or rear stabilizer bar. Two (2) per set. Used on Front for 1975-1979 F150-F350 series 4x2. Used on Rear for 1980-1989 F100-F350 series.
Stabilizer Bar End Link Set
p/n: 60-0221-33
Twenty-two (22) piece Stabilizer Bar End Link set for both sides of one (1) vehicle, fits front or rear bar. Order two (2) sets for vehicles with front and rear stabilizer bars. Hex head bolt 3/8"-16 NF x 6-15/16" long. Comes with metal sleeve, metal cup washers and rubber grommets.
Stationary quarter window seal
p/n: 70-3510-77
Rear stationary quarter window seals. Fully molded like the originals.
Stationary Rear Quarter Window Gaskets
p/n: 20-0822-77
This Stationary Rear Quarter Window Gasket pair mounts around the full perimeter of the rear quarter glass and has properly molded corners for a precise, factory fit. For truck models WITH Stainless molding.
Stationary Rear Quarter Window Gaskets
p/n: 20-0821-77
This Rear Quarter Window Gasket pair mounts around the full perimeter of the rear quarter glass and has properly molded corners for a precise, factory fit. For truck models WITHOUT Chrome molding.
Stationary Rear Quarter Window Gaskets
p/n: 20-0823-77
This Rear Quarter Window Gasket pair mounts around the full perimeter of the rear quarter glass and has properly molded corners for a precise, factory fit. For truck models WITH Flexible Plastic Chrome molding.
Steel Sash Channel - Right Front Door
p/n: 20-0811-58
This reproduction Steel Sash Channel is designed from the original part for superior fitment and function. This Right Front Door channel fits in the bottom of door for the glass to sit in.
Steel Sash Channel, Left Side
p/n: 20-0810-58
This reproduction Steel Sash Channel is designed from the original part for superior fitment and function. This channel is for the Left Side only.
Steering Column - Floor Seal
p/n: 70-3358-36
This Steering Column is designed from the original part for superior fitment and sealing. Seal part is die cut from quality masticated rubber to authentic original dimensions. This part fits around the steering column to seal the column through the body floor pan inside the vehicle.
Steering Column At Floor Seal
p/n: 70-3490-36
This Steering Column At Floor Seal is designed from the original part for superior fitment and sealing. The seal is die cut from quality masticated rubber to authentic original dimensions. This part fits around the steering column to seal the column through the body floor pan.
Steering Column To Floor Seal
p/n: 20-0785-36
This Steering Column To Floor Seal is designed from the original part for superior fitment and seal. Restores the cab to floor sealing against the outside elements. For Manual Steering models.
Sun Visor Tips
p/n: 20-2882-88
These Sun Visor Tips are reproductions manufactured to OEM specifications to install for an authentic fit, finish and function. Sold as a pair.
Swing-Out Quarter Window Weatherstrips
p/n: 70-4124-76
This Swing-Out Quarter Window Weatherstrip pair is not a reproduction of an OEM part, but rather an expertly engineered solution specific for this application. Guaranteed performance and "factory-like" look.
Tailgate Bumper
p/n: 20-0694-45
These Tailgate Bumpers are sold as pair. The bumpers fit in brackets and comes with chains.
Tailgate Bumper
p/n: 20-0801-45
This Tailgate Bumper is used as a retaining support. Two (2) are required per truck.
Tailgate Drain Seals
p/n: 70-4007-84
This Tailgate Drain Seal pair includes right and left sides that install at the bottom of the tailgate. These seals are properly molded from originals for a factory like fit.
Tailgate Lower Seal
p/n: 70-4010-85
This Tailgate Lower Seal is properly molded from originals for a factory like fit. The seal is installed using screws, which are included.
Tailgate Lower Weatherstrip
p/n: 70-4818-85
This Tailgate Lower Weatherstrip reproduction is designed from the original part for superior fitment and seal. This weatherstrip installs on the tailgate and is made from high-quality, ozone-resistant EPDM rubber.
Tailgate Side Seals
p/n: 70-4009-85
This Tailgate Side Seals includes right and left side with installation screws. These seals are properly molded from originals for a factory like fit.
Tailgate Weatherstrip
p/n: 70-2434-72
This Tailgate Weatherstrip reproduction is designed from the original part for superior fitment and seal. This weatherstrip mounts on three (3) sides of the tailgate with weatherstrip adhesive (not included).
Tailgate Weatherstrip
p/n: 70-3009-84
This Tailgate Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts to the sides and bottom of the tailgate with properly spaced plastic clips. Includes molded ends.
Tailgate Weatherstrip
p/n: 70-3424-84
This Tailgate Weatherstrip is designed from the original part for superior fitment and seal. The weatherstrip mounts to the sides and bottom of the tailgate with properly spaced plastic clips. Includes molded ends.
Tailgate Window Felt Outer Weatherstrip
p/n: 80-0679-57
This Tailgate Window Felt Weatherstrip is the horizontal seal that wipes the tailgate rear window when the glass is lowered. This outer seal (1 piece only) is made from Original factory style material and comes ready to install. Installation hardware is not included.
Taillight Gasket Kit
p/n: 70-3566-15
Kit, taillight lens and mounting gaskets. Ten (10) piece set. Includes 1 pair of #70-3565-15 lens to tail light body mounting seals and eight (8) each of 70-3564-15 tail light assembly to body seals.
Taillight Lens Gasket
p/n: 70-3565-15
Gasket, taillight lens mounting gasket. Machine die cut from 1/4" thick sponge rubber. Seals tail light lens to tail light assembly. Included in our kit #70-3566-15.
Taillight Lens Gaskets
p/n: 20-2667-15
This Taillight Lens Gasket pair is designed from the original part for superior fitment, finish and function. These reproduction gaskets fit between taillight lens and taillight housing.
Taillight Mounting Pad
p/n: 70-3564-15
Gasket, taillight mounting pad. Eight (8) used per car. Machine die cut 5/8" thick sponge rubber seals tail light assembly to body. Included in our kit part number #70-3566-15.
Transmission Mount
p/n: 20-0602-11
This Transmission Mount, rear engine mount, is made to original specifications for an authentic fit and appearance. Used for manual or automatic transmissions.
Transmission Mount
p/n: 70-2058-25
This Transmission Mount is a new aftermarket replacement mount manufactured to meet or exceed factory specifications.. One (1) required per vehicle.
Trunk Decklid Bumper Stop
p/n: 82-0160-87
This Trunk-Decklid Bumper Stop is a quality reproduction of the original factory part. This adjustable rubber bumper attaches to the vehicle body to support / cushion the trunk lid closure.
Trunk Decklid Weatherstrip
p/n: 20-0095-84
This Trunk Decklid Weatherstrip is designed from the original part for superior fitment and seal. The weatherstrip mounts around the full perimeter of the trunk directly to the body.
Trunk Emblem Gasket
p/n: 70-3220-87
This single Trunk Emblem gasket is designed from the original part for superior fitment and seal. The gasket is precision die cut to the original specifications. This gasket is for one (1) trunk / decklid emblem mounting.
Trunk or Hatchback Weatherstrip
p/n: 20-2866-84
This Trunk or Hatchback Weatherstrip is designed from the original part for superior fitment and seal. The weatherstrip mounts around the full perimeter of the trunk directly to the body.
Trunk Weatherstrip
p/n: 82-0028-84
This Trunk Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.
Trunk Weatherstrip
p/n: 70-0773-84
This Trunk Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.
Trunk Weatherstrip
p/n: 70-2124-84
This Trunk Weatherstrip is designed from the original part for superior fitment and seal. The weatherstrip mounts around the full perimeter of the trunk directly to the body.
Trunk Weatherstrip
p/n: 20-2867-84
This Trunk Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.
Trunk Weatherstrip
p/n: 20-0302-84
This Trunk Weatherstrip is designed from the original part for superior fitment and seal. The decklid weatherstrip mounts around the full perimeter of the trunk directly to the body.
Trunk Weatherstrip
p/n: 82-0030-84
This Trunk Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.
Trunk Weatherstrip
p/n: 70-0774-84
This Trunk Weatherstrip is designed from the original part for superior fitment and seal. The weatherstrip mounts around the full perimeter of the trunk directly to the body.
Trunk Weatherstrip
p/n: 70-3346-84
This Trunk Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.
Trunk Weatherstrip
p/n: 70-3347-84
This Trunk Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.
T-Top Body Weatherstrips
p/n: 70-2214-68
This T-Top Body Weatherstrip pair is the main body roof rail weatherstrips for models with Hurst T-Tops. This is a reproduction of the 2nd generation part. Different generation parts are not interchangeable.
T-Top Body Weatherstrips
p/n: 70-2405-68
This T-Top Body Weatherstrip pair is the main body roof rail weatherstrips for models with Hurst T-Tops. This is a reproduction of the 2nd generation part. Different generation parts are not interchangeable.
T-Top Panel Weatherstrips
p/n: 82-0174-68
This T-Top Panel Weatherstrip pair mounts around perimeter of removable T-Top Panel. Made without internal core. For early 1977 models fits "Rear Clamp Secured" panels.
T-Top Roof Rail Weatherstrips
p/n: 70-2220-68
This T-Top Roof Rail Weatherstrip pair is designed from the original part for superior fitment and seal. This part fits on the roof of the vehicle and seals the side window when the window is fully raised.
Turn signal light gasket
p/n: 20-0749-16
Gaskets, side marker light. Front and rear. Four (4) piece set.
U Jamb Lock Pillar Filler
p/n: 70-3887-79
This U Jamb Door Lock Pillar Filler pair is designed from the original part for superior fitment and sealing. This right and left weatherstrip filler mounts at the bottom of the rear side window, lower leading edge to seal the rear quarter window. Also known as a door jamb seal.
U Jamb Lock Pillar Fillers
p/n: 70-1912-79
This U Jamb Lock Pillar Filler serves to seal the bottom of the rear side window and may also be known as a door jamb seal. Fully molded authentic rubber construction with metal core.
Ulta-Mat Heat and Sound Deadener Set
p/n: 70-4788-88
This Ulta-Mat Heat and Sound Deadener Underlayment Set includes die cut underlayment pieces for the floor, doors, quarter, and roof panels. Underlayment pieces are made from a flexible and lightweight foil facing foam rubber sound and heat insulation material.
Upper Door - Roof Rail Weatherstrips
p/n: 70-2436-73
This Upper Door - Roof Rail Weatherstrip pair is made of high-quality EPDM rubber with vulcanized corners for a factory like fit. These upper, left and right door weatherstrips seal the door window frame to the hardtop and to the windshield frame.
Upper Door Weatherstrips - Top of Door
p/n: 20-0819-72
This Upper Door Weatherstrip pair is designed from the original parts for superior fitment and seal. Used as an upper / top of door weatherstrip on both doors. This part was used on 1978-1979 Ford Trucks but can also be retrofitted to 1973-77 Ford Pickups as well to improve the door seal.
Vent division bar weatherstrip
p/n: 70-3780-56
Front vent window division post seal. Fully molded with metal core and pre-drilled holes. This part fits opposite the glass run channel and seals the vent window when the vent is closed. See Front door vent weatherstrip for main rubber seal.
Vent Window Division Post Weatherstrips
p/n: 70-1923-56
This Front Vent Window Division Post Weatherstrip pair is designed from the original part for superior fitment and seal. This piece mounts on the vertical division bar with rivets and the vent glass closes against it.
Vent Window Pivot Post Rivet
p/n: 70-4757-98
This Vent Window Pivot Post Rivet is used to replace the hinge pivot rivet for both left and right vent window assemblies. Commonly used for General Motors car and truck models.