Trunk Weatherstrip
p/n: 70-3346-84
This Trunk Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.
Window Felt Outer Beltline Weatherstrips
p/n: 80-0151-57
This is a two (2) piece Original material style Outer side window horizontal weatherstrip set (also known as beltline weatherstrip). This ready to install beltline set includes Only the Outer seals for MODELS WITHOUT SPECIAL MOLDING. Made with a 3/8" FLAT CHROME BEAD.
Tailgate Weatherstrip
p/n: 70-3424-84
This Tailgate Weatherstrip is designed from the original part for superior fitment and seal. The weatherstrip mounts to the sides and bottom of the tailgate with properly spaced plastic clips. Includes molded ends.
Front Door Weatherstrips
p/n: 82-0121-72
This Front Door Weatherstrip pair is designed from the original part for superior fitment and seal. Pin type door weatherstrips clip directly to the vehicle doors to seal against the body when closed.
Front or Rear Door Weatherstrips
p/n: 70-1901-72
This Front or Rear Door Weatherstrip pair is a push-on type door seal that mounts directly to the body to seal against the full perimeter of the doors. Order two (2) pair if replacing all four (4) doors.
Hood to Cowl Weatherstrip
p/n: 70-4704-43
This Hood to Cowl Weatherstrip is designed from the original part for superior fitment and seal. An exact reproduction of the original profile. This weatherstrip installs at the rear of the engine bay to seal between the hood and vehicle body cowl.
Hood to Cowl Weatherstrip
p/n: 70-3541-42
Cowl top panel to hood seal. Sixty-seven and seven eighths' inches (67-7/8") long. Fully molded rubber with fifteen (15) metal clips installed along perimeter of weatherstrip.
Windshield Gasket with Groove
p/n: 20-0804-50
This Windshield Gasket with Groove mounts around the full perimeter of the front glass and has properly molded corners for a precise, factory fit. It also has the slot to accommodate the outer edge's decorative molding.
Lower Door Weatherstrips
p/n: 70-2429-72
This Lower Door Weatherstrip pair is designed from the original parts for superior fitment and seal. These primary door weatherstrips mount (push pin) directly onto the vehicle front doors to seal against the body when closed.
Windshield Gasket without Groove
p/n: 20-0803-50
This Windshield Gasket without Groove mounts around the full perimeter of the front glass and has properly molded corners for a precise, factory fit. This seal does not have the slot to accommodate the outer edge's decorative chrome reveal molding.
Window Felt Beltline Weatherstrips
p/n: 80-0065-57
This is an Original equipment style side window horizontal weatherstrip set (also known as beltline weatherstrip). This four (4) piece set includes inner and outer window felt beltline weatherstrips for each front door side window. This set is for the Front Doors Only on both two (2) and four (4) door models.
Window Felt Beltline Weatherstrips
p/n: 80-0623-57
Original equipment style side window horizontal seal kit (also known as beltline weatherstrip). Four (4) piece kit includes inner and outer felt beltline weatherstrip for each door window.
U Jamb Lock Pillar Fillers
p/n: 70-1912-79
This U Jamb Lock Pillar Filler serves to seal the bottom of the rear side window and may also be known as a door jamb seal. Fully molded authentic rubber construction with metal core.
Window Felt Outer Beltline Weatherstrips
p/n: 80-0152-57
This is a two (2) piece Original material style Outer side window horizontal weatherstrip set (also known as beltline weatherstrip). This ready to install beltline set includes Only the Outer seals for MODELS WITH SPECIAL 1/2" CHROME MOLDING.
Splash Apron / A-Arm Dust Shield Filler Set
p/n: 70-2775-45
This four (4) piece Splash Apron / A-Arm Dust Shield Filler set is designed from the original part for superior fitment and seal. Filler pieces are die cut from quality masticated rubber to authentic original dimensions. Pieces fit over suspension a-arms and inside front inner fenders.
Header Bow Weatherstrip - Hardtop
p/n: 70-3944-64
This Header Bow Weatherstrip is the top and front seal rubber across windshield header for hardtops. Fully molded with the proper as original cross section.
Front Door Weatherstrips
p/n: 70-2431-72
This Door Weatherstrip pair is the primary door to body weatherstrip for both front doors. The proper extrusion cross section dense rubber with a bonded adhesive strip.
Hardtop Roof Rail Weatherstrips
p/n: 82-0012-68
This Hardtop Roof Rail Weatherstrip pair is made of ozone resistant EPDM sponge rubber with fully molded A pillar ends and corners for a factory like fit. These high quality seals fit on the roof of the vehicle and work to seal the side windows when the window is fully raised.
Windshield Gasket with Groove
p/n: 70-1917-50
This Windshield Gasket is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the front glass and requires a locking strip for installation (not included). Locking strips are available in either black or chrome.
Rear Window Gasket - No Groove
p/n: 20-0825-81
This Rear Window Gasket is designed from the original part for superior fitment and seal. The gasket mounts around the full perimeter of the back glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation.
Windshield Gasket without Groove
p/n: 70-1916-50
This Windshield Gasket without Groove mounts around the full perimeter of the front glass. This is a standard black gasket without a reveal molding lockstrip trim groove. Manufactured to original specifications and from high quality materials.
Rear Sliding Window Gasket
p/n: 70-4308-81
This two (2) piece Rear Sliding Window Gasket set mounts around the full perimeter of the back glass and has properly molded corners for a precise, factory fit. Includes locking strip for window gasket.
Windshield Gasket
p/n: 70-2476-50
This Windshield Gasket mounts around the full perimeter of the front glass and has properly molded corners for a precise, factory fit.
Front Door Vent Window Weatherstrips
p/n: 20-0809-55
These front door vent window seals are designed from the original parts for superior fitment and seal. The pieces are molded as left and right and are one piece with the division post seal.
Window Felt Outer Beltline Weatherstrips
p/n: 80-0677-57
Original equipment style side window outer horizontal seal (also known as beltline weatherstrip). These strips wipe the side windows when the glass is lowered.
Liftgate Weatherstrip
p/n: 70-3509-85
This Liftgate Weatherstrip is designed from the original part for superior fitment and seal. The weatherstrip mounts around the full perimeter of the rear liftgate opening directly to the body.
Stationary Rear Quarter Window Gaskets
p/n: 20-0823-77
This Rear Quarter Window Gasket pair mounts around the full perimeter of the rear quarter glass and has properly molded corners for a precise, factory fit. For truck models WITH Flexible Plastic Chrome molding.
Stationary Rear Quarter Window Gaskets
p/n: 20-0821-77
This Rear Quarter Window Gasket pair mounts around the full perimeter of the rear quarter glass and has properly molded corners for a precise, factory fit. For truck models WITHOUT Chrome molding.
Stationary Rear Quarter Window Gaskets
p/n: 20-0822-77
This Stationary Rear Quarter Window Gasket pair mounts around the full perimeter of the rear quarter glass and has properly molded corners for a precise, factory fit. For truck models WITH Stainless molding.
Radius Arm Bushing Set
p/n: 20-0780-32
This Radius Arm Bushing Set is a quality reproduction of the original factory part(s). This eight (8) piece includes four (4) each D6TZ-3B203-A Front Axle Bushings and four (4) each C6TZ-3B203-C Frame End Bushings. Fits four-wheel (4WD) drive trucks.
Rear Window Gasket without Groove
p/n: 70-1722-81
This Rear Window Gasket without Groove mounts around the full perimeter of the back glass and has properly molded corners for a precise, factory fit. Fitted gasket provides a formed, seamless seal.
Rear Window Gasket
p/n: 70-2458-81
This Rear Window Gasket is designed from the original part for superior fitment and seal. The gasket mounts around the full perimeter of the back glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation.
Side Window Vertical Leading Edge Weatherstrips
p/n: 70-1810-80
This quarter to side window Vertical Leading Edge Weatherstrip pair is designed from the original part for superior fitment and seal. This part attaches to the vertical edge of the rear side windows when the rear side windows are fully raised.
Vent division bar weatherstrip
p/n: 70-3780-56
Front vent window division post seal. Fully molded with metal core and pre-drilled holes. This part fits opposite the glass run channel and seals the vent window when the vent is closed. See Front door vent weatherstrip for main rubber seal.
Rear Window Gasket with Groove
p/n: 70-1926-81
This Rear Window Gasket with Groove set contains the rear window gasket itself and the corner joint sleeves (stainless finish, can be painted black). The gasket mounts around the full perimeter of the back glass and has properly molded corners for a precise, factory fit.
Side Window Vertical Leading Edge Weatherstrips
p/n: 70-1820-80
This quarter to side window Vertical Leading Edge Weatherstrip pair is designed from the original part for superior fitment and seal. This part attaches to the vertical edge of the rear side windows when the rear side windows are fully raised.
Window Felt Inner Beltline Weatherstrips
p/n: 80-0676-57
Original equipment style side window inner horizontal seal (also known as beltline weatherstrip). These strips wipe the side windows when the glass is lowered.
Hardtop to Body Side Weatherstrips
p/n: 70-4892-68
This removable Hardtop to Body Side Weatherstrip pair is designed from the original part for superior fitment and sealing. Weatherstrips mount on the driver and passenger side body rail of the hardtop shell with weatherstrip adhesive glue (not included).
Hood to Radiator Weatherstrip
p/n: 70-2379-43
Weatherstrip, hood to radiator. Proper rubber cross section with pre-drilled holes, cut outs and included attaching clips.Length: 51.25 inches.
Side Window Glass Rear Weatherstrips
p/n: 82-0157-68
This Side Window Glass Rear Weatherstrip pair installs on the rear quarter section and seals the back edge of the door window to the body. Made from top quality rubber for durability and a like factory seal.
Window Felt Outer Beltline Weatherstrips
p/n: 80-0412-57
This is an Original material style Outer side window horizontal weatherstrip set (also known as beltline weatherstrip). This ready to install two (2) piece beltline set includes only the Outer seals (the part sealing the outside of the vehicle) for the door side windows.
Window Felt Outer Beltline Weatherstrips
p/n: 80-0418-57
This is a Original material OEM style side window horizontal weatherstrip set (also known as beltline weatherstrip). This two (2) piece set includes Left and Right Outer Only window felt beltline weatherstrips for each door side window.
Hatchback Weatherstrip
p/n: 70-3561-84
This Hatchback Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the hatch opening directly to the body.
Windshield A-Pillar Post Weatherstrips
p/n: 82-0154-68
This Windshield A-Pillar Post Weatherstrip pair is designed from the original part for superior fitment and seal. The Left and Right weatherstrip pair installs on A-pillar posts and seals front edge of door window to the body windshield frame.
Splash Apron / A-Arm Dust Shield Filler Set
p/n: 70-2773-45
This six (6) piece Splash Apron / A-Arm Dust Shield Filler set is designed from the original part for superior fitment and seal. Filler pieces are die cut from quality masticated rubber to authentic original dimensions. Pieces fit over suspension a-arms and inside front inner fenders.
Window Felt Beltline Weatherstrips
p/n: 80-0592-57
This is an Original equipment style side window horizontal weatherstrip set (also known as beltline weatherstrip). This four (4) piece set includes inner and outer window felt beltline weatherstrips for each driver and passenger door side window.
Window Felt Beltline Weatherstrips
p/n: 80-0645-57
This is an Original material style side window horizontal weatherstrip set (also known as beltline weatherstrip). This four (4) piece anti-rattler set includes inner and outer window felt beltline weatherstrips for each side window.
Windshield Gasket
p/n: 70-2467-50
This Windshield Gasket mounts around the full perimeter of the front glass and has properly molded corners for a precise, factory fit. It also has the slot to accommodate the outer edge's decorative molding.
Liftgate Weatherstrip
p/n: 70-4819-85
This Tailgate Lower Weatherstrip reproduction is designed from the original part for superior fitment and seal. This weatherstrip mounts on the liftgate and seals against the body when the liftgate is closed.
U Jamb Lock Pillar Filler
p/n: 70-3887-79
This U Jamb Door Lock Pillar Filler pair is designed from the original part for superior fitment and sealing. This right and left weatherstrip filler mounts at the bottom of the rear side window, lower leading edge to seal the rear quarter window. Also known as a door jamb seal.
Windshield Gasket
p/n: 70-2452-50
This Windshield Gasket mounts around the full perimeter of the front glass and has properly molded corners for a precise, factory fit.
Tailgate Window Felt Outer Weatherstrip
p/n: 80-0679-57
This Tailgate Window Felt Weatherstrip is the horizontal seal that wipes the tailgate rear window when the glass is lowered. This outer seal (1 piece only) is made from Original factory style material and comes ready to install. Installation hardware is not included.
Hood to Cowl Weatherstrip
p/n: 70-3563-42
This Hood to Cowl Weatherstrip is designed from the original part for superior fitment and seal. An exact reproduction using the correct profile extrusion and pre-installed fastener clips.
Side Window Leading Edge
p/n: 70-3273-80
This Side Window Vertical Leading Edge Weatherstrip pair is designed from the original part for superior fitment and seal. Quality and authentic molded rubber construction with a corrosion resistant brass metal core.
Front Door Vent Window Weatherstrips
p/n: 70-4475-55
This Front Door Vent Window Weatherstrip pair is designed from the original part for superior fitment and seal. A two (2) piece pair that fits both driver (Left) and passenger (Right) front doors of the vent / wing window assemblies.
Tailgate Weatherstrip
p/n: 70-3009-84
This Tailgate Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts to the sides and bottom of the tailgate with properly spaced plastic clips. Includes molded ends.
Side Window Vertical Leading Edge Weatherstrips
p/n: 70-0882-80
This quarter to side window Vertical Leading Edge Weatherstrip pair is designed from the original part for superior fitment and seal. This part attaches to the vertical edge of the rear side windows when the rear side windows are fully raised.
Steel Sash Channel, Left Side
p/n: 20-0810-58
This reproduction Steel Sash Channel is designed from the original part for superior fitment and function. This channel is for the Left Side only.
Steel Sash Channel - Right Front Door
p/n: 20-0811-58
This reproduction Steel Sash Channel is designed from the original part for superior fitment and function. This Right Front Door channel fits in the bottom of door for the glass to sit in.
Front Door Weatherstrips
p/n: 70-2430-72
This Front Door Weatherstrip pair is the primary door to body weatherstrip. These gaskets mount directly to the body pinchweld seam to seal against the full perimeter of both the front left and front right doors.
Trunk Weatherstrip
p/n: 70-3347-84
This Trunk Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.
Rear Liftgate Window Gasket with Trim Groove
p/n: 70-4004-83
This Rear Liftgate Window Gasket with Trim Groove fits the rear liftgate window of the removable Bronco hardtop. It's made from ozone resistant EPDM rubber and to the same specifications as the original for an authentic factory fit and finish.
Door Weatherstrips
p/n: 70-4512-72
This Door Weatherstrip pair is designed from the original parts for superior fitment and seal. These door weatherstrips mount, with pre-installed pins, directly on the vehicle body to seal the driver and passenger doors when closed.
Tailgate Lower Weatherstrip
p/n: 70-4818-85
This Tailgate Lower Weatherstrip reproduction is designed from the original part for superior fitment and seal. This weatherstrip installs on the tailgate and is made from high-quality, ozone-resistant EPDM rubber.
Quarter Window Lockstrip - BLACK
p/n: 70-3202-52
This Quarter Window Lockstrip is designed from the original part for superior fitment and function. This black lockstrip inserts into the weatherstrip to lock in the window glass. Requires 2 sets per vehicle.
Hood Side Bumpers
p/n: 20-0791-42
A four (4) piece Hood Side Bumper set that is manufactured to OEM specifications to install for an authentic fit, finish, and function. Reproduction bumpers designed from the original part.
Radius Arm & Axle Pivot Bushing Set
p/n: 20-0776-32
This Radius Arm and Axle Pivot Bushing Set is a quality reproduction of the original factory part(s). This six (6) piece strut rod bushing set includes two (2) each C5TZ-3B177-A, two (2) each C5TZ-3B203-C, and two (2) each C5TZ-3B203-B top quality bushings. Fits two-wheel (2WD) drive trucks.
Side Window Vertical Leading Edge Weatherstrips
p/n: 70-0926-80
This quarter to side window Vertical Leading Edge Weatherstrip pair is designed from the original part for superior fitment and seal. This part attaches to the vertical edge of the rear side windows when the rear side windows are fully raised.
Heat and Sound Insulator Underlayment
p/n: 70-4676-88
This single piece die-cut Heat and Sound Insulator Underlayment for floors lays under the carpeting's felt mat. This underlayment will decrease road noise and decrease heat inside the trucks interior compartment. Pre-cut and ready to be installed into your vehicle to improve driving comfort.
Liftgate Weatherstrip
p/n: 70-3008-84
This Liftgate - Upper Tailgate Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the liftgate with properly spaced plastic clips.
1975 Ford Truck & Van Factory Shop Manual, CD
p/n: 07-1254-07
This FORD-Licensed Detroit Iron CD contains the most comprehensive set of digital OEM shop manuals. The factory manuals on this CD were professionally scanned from the original service and parts manuals.
Hood to Cowl Weatherstrip
p/n: 70-4280-43
This Hood to Cowl Weatherstrip is designed from the original part for superior fitment and seal. An exact reproduction of the original profile. This seal mounts at the rear of the engine bay to seal between the hood and vehicle body cowl.
Hatchback Weatherstrip
p/n: 82-0102-84
This Hatchback Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the hatch opening directly to the body.
Automatic Transmission Mount
p/n: 70-1007-11
This Automatic Transmission Mount is designed from the original part for a correct fitment. Mounts rear at the transmission. This mount supports the transmission and dampens vibration.
Hood to Cowl Weatherstrip
p/n: 70-3350-42
This Hood to Cowl Weatherstrip is designed from the original part for superior fitment and seal. An exact reproduction using the correct profile dense rubber extrusion and pre-installed fastener clips.
Liftgate Weatherstrip
p/n: 70-3477-84
This Liftgate Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the liftgate opening directly to the body.
1968-1975 Pontiac Factory Parts Manual, CD
p/n: 07-1414-07
This GM Licensed Detroit Iron CD provides the most comprehensive set of digital Pontiac Factory parts manuals. The factory manuals on this CD were professionally scanned from the original service and parts manuals.
Rigid Run Channel
p/n: 20-0813-58
Channel, rigid division bar run. For front edge of door glass. Two (2) required per truck. Use for either right or left side.
Window Felt Inner Beltline Weatherstrips
p/n: 80-0417-57
This is a high-quality material Window Felt Inner Beltline side window horizontal weatherstrip set (also known as beltline weatherstrip). This two (2) set includes only the inner seals (the part sealing the interior of the car) for the door side windows.
Trunk Weatherstrip
p/n: 20-2867-84
This Trunk Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.
Rear Liftgate Window Gasket without Groove
p/n: 70-4003-83
This Rear Liftgate Window Gasket without Trim Groove fits the rear liftgate window of the Bronco's Removable Hardtop. It's made from ozone resistant EPDM rubber and to the same specifications as the original for an authentic factory fit and finish.
Fuel Filler Pipe To Trunk Floor Seal
p/n: 20-2739-41
This Fuel Filler Pipe To Trunk Floor Seal is designed from the original part for superior fitment and seal. This part fits around the vehicles fuel filler pipe between the filler pipe and the trunk floor.
Vent Window Division Post Weatherstrips
p/n: 70-1923-56
This Front Vent Window Division Post Weatherstrip pair is designed from the original part for superior fitment and seal. This piece mounts on the vertical division bar with rivets and the vent glass closes against it.
Window Locking Strip - Chrome
p/n: 70-2196-52
This Chrome Locking Strip is used to retain windshield gaskets in pickups and vans. Designed from the original part for superior fitment, finish and function. Available in 16ft. lengths.
Quarter Window Lockstrip - CHROME
p/n: 70-3203-52
This Quarter Window Lockstrip is designed from the original part for superior fitment and function. This chrome lockstrip inserts into the weatherstrip to lock in the window glass. Requires 2 sets per vehicle.
Liftgate to Tailgate Weatherstrip
p/n: 70-4158-85
This Liftgate to Tailgate Weatherstrip reproduction is designed from the original part for superior fitment and seal. This liftgate seal mounts to the liftgate with screws (not included).
Rear Window Gasket without Groove
p/n: 70-4513-83
This Rear Window Gasket for Standard Cabs mounts around the full perimeter of the back glass. This is a standard black EPDM rubber seal with NO reveal molding groove.
Hardtop to Body Header Weatherstrip
p/n: 70-4891-68
This removable Hardtop to Body Header Weatherstrip is designed from the original part for superior fitment and sealing. Weatherstrip mounts on the top of the body and seals against the front of the shell with weatherstrip adhesive glue (not included).
Front Lower Control Arm Bumper
p/n: 20-0202-32
This Front Lower Control Arm Bumper is designed from the original part for superior fitment, finish, and function. This suspension bumper mounts to the front lower control arm to prevent metal to metal contact.
Hood to Cowl Weatherstrip
p/n: 70-1253-42
This Hood To Cowl Weatherstrip is designed from the original part for superior fitment and seal. This weatherstrip mounts at the rear of the engine bay directly to the body. Seventy-two (72") inches OAL and includes fifteen (15) 70-1255-42 plastic clips for installation.
Rear Cargo Door Hinge Gaskets Set
p/n: 60-0659-69
This four (4) piece molded Rear Cargo Door Hinge Gasket Set is made to original specifications for proper fitment. Seals are fully molded from top quality rubber to ensure durability, fitment and proper seal.
Taillight Lens Gasket
p/n: 70-3565-15
Gasket, taillight lens mounting gasket. Machine die cut from 1/4" thick sponge rubber. Seals tail light lens to tail light assembly. Included in our kit #70-3566-15.
Front Suspension Rubber Bumper Set
p/n: 82-0176-32
Front Suspension Rubber Bumper Kit - A four (4) piece set with both upper and lower arm rubber bumpers in one set.
Door End Cap Fillers
p/n: 70-4673-73
This Door End Cap Filler pair manufactured with soft, yet durable, closed-cell EPDM sponge rubber with galvanized steel cores. Designed from the original part for superior fitment, finish and function.
Clutch Release Lever Boot
p/n: 20-0761-24
This Clutch Release Lever Boot is designed from the original part for superior fitment and seal. This boot is for the clutch release lever to clutch housing.
Firewall to Hood Weatherstrip - Cowl Lacing
p/n: 20-1091-42
This Firewall To Hood Weatherstrip - Cowl Lacing mounts under the rear of the hood on the cowl panel. This is a die-cut extrusion with pre-installed clips as original.
Firewall to Hood Weatherstrip - Cowl Lacing
p/n: 70-3374-42
This Firewall to Hood Weatherstrip - Cowl Lacing is designed from the original part for superior fitment and seal. Measuring 67-1/2” long x 1-1/4” wide to provide complete coverage.
Axle Rebound Pad
p/n: 20-0647-32
Bumper, rear axle. Two (2) required per Truck. 1965-72: F100, F350 2 W/D (wheel drive), F100, F250 4 W/D (wheel drive).
Trunk or Hatchback Weatherstrip
p/n: 20-2866-84
This Trunk or Hatchback Weatherstrip is designed from the original part for superior fitment and seal. The weatherstrip mounts around the full perimeter of the trunk directly to the body.
Steering Column To Floor Seal
p/n: 20-0785-36
This Steering Column To Floor Seal is designed from the original part for superior fitment and seal. Restores the cab to floor sealing against the outside elements. For Manual Steering models.