Please click on the part name in red in order to get a complete description.
This rear window gasket is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the back glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation. It also has the slot to accommodate the outer edge's decorative molding.
This rear window gasket is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the back glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation.
This eight (8) piece side window glass kit includes the beltline moldings and glass run channels for both driver and passenger doors. These reproduction parts are designed from originals for superior performance, durability and a factory fit. Also referred to as a Door Glass Anti-Rattler Kit.
This windshield gasket mounts around the full perimeter of the front glass and has properly molded corners for a precise, factory fit. It also has the slot to accommodate the outer edge's narrow chrome decorative molding (not included).
This windshield gasket mounts around the full perimeter of the front glass and has properly molded corners for a precise, factory fit.
Kit, cab to frame mounting. Thirty-six (36) piece set. For 2 W/D (wheel drive) only.
Seal, movable quarter window.
These front door vent window seals are designed from the original parts for superior fitment and seal. The pieces are molded as left and right and are one piece with the division post seal.
Original equipment style side window horizontal seal kit (also known as beltline weatherstrip). Kit includes inner and outer felt beltline weatherstrip for each door and quarter windows. These strips wipe the side windows when the glass is lowered. They c
Seal, stationary quarter window. Models WITH Stainless molding.
Seal, stationary quarter window. Models WITHOUT Chrome.
Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide, three sixteenths (3/16) inch, fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty fi
Door edge weatherstrip - Used as an upper seal on the top of both doors. Each measures 65 inches long.
Channel, door glass sash. Left Side only.
Channel, door glass sash. Right Side only.
This door gasket weatherstrip is the primary door to body weatherstrip. These gaskets mount directly to the body pinchweld seam to seal against the full perimeter of both the front left and front right doors.
Set, windshield chrome plastic molding. Includes: one (1) windshield molding strip (cit to fit), one (1) pair upper corner molding, and one (1) pair lower corner molding. Five (5) piece set.
This locking strip set is designed to go into the groove around the perimeter of the glass. It is a flexible plastic strip with a decorative chrome mylar finish and two (2) clips to join the ends.
This FORD-Licensed Detroit Iron CD contains the most comprehensive set of digital OEM shop manuals. The factory manuals on this CD were professionally scanned from the original service and parts manuals.
Channel, rigid division bar run. For front edge of door glass. Two (2) required per truck. Use for either right or left side.
Boot, clutch release lever to clutch housing.
Bumper, rear axle. Two (2) required per Truck. 1965-72: F100, F350 2 W/D (wheel drive), F100, F250 4 W/D (wheel drive).
Channel, door glass flexible run. Either Right or Left Side. Top & back side of door glass. Two (2) required per truck.
Seal, clutch rod to floor. Useage: 1971-72: F100-350 series AFTER Serial #M00,001 1973-79: F100-350 series trucks
Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide, three sixteenths (3/16) inch, twenty five (25) foot roll. Typially used for attaching two (2) fenders to body. For f
Pad, cargo light. After Serial # Y60,001.
Knob, column shift lever. Black.
Bumper, front axle.
Pad, front bumper guard.
Boot, clutch release lever dust.
Assembly, front stabilizer bar link. Two (2) required per truck.
Bushing, front stabilizer bar. Two (2) required per car. For 2 W/D (wheel drive).
This chrome lockstrip inserts into the weatherstrip to lock in the glass. Made from high quality materials to the original design for a factory like fit and appearance.
Kit, front or rear stabilizer bar link end repair. Two (2) per kit. Used on Front for 1975-79: F150-350 series 4x2. Used on Rear for 1980-89: F100-350 series.
Seals, front fender apron to cab mount strip. Made of high quality EPDM rubber and to the original design for a factory like fit.
Cover, tailgate chain rubber. Cover only. Chain NOT included.
This black lockstrip inserts into the weatherstrip to lock in the glass. Made from high quality materials to the original design for a factory like fit and appearance.
Fender welting. Eight (8) foot length.
Pads, outside door handle.
Gasket, windshield wiper. Four (4) piece set.
Molding, upper windshield corner. Replaces factory #D7TZ-10030A42-B.
Insulator, transmission gear shift column lever.
Bumpers, hood side. Four (4) piece set.
Pad, parking brake pedal.
Gaskets, side marker light. Front and rear. Four (4) piece set.
Radius Arm Bushing - At Frame end of Radius Rod 4-Wheel Drive. Requires two (2) bushings per side with four (4) per vehicle.
Pad, brake and clutch pedal. Slip over type.
Pad, brake pedal.1973-79: F100-350 series with manual or automatic transmission. 1980-89: F100/350 series with automatic transmission.
Bumpers, gas filler door bumpers. Mounts on body.
Plug, fill hole. Used where clutch rod goes on standard transmission.
Bumper, tailgate support retaining. Two (2) required per truck.
Bumper, gas filler door hinge. Mounts on door.
Bumpers, tailgate lower side. Mounts on tailgate.
Grommets, firewall. Five eighths (5/8) inch outside diameter. One (1) each on both sides of firewall.
Steering Column Floor Seal - Manufactured from die cut masticated rubber to authentic original dimensions. For models with Manual and Power Steering.
Pad, pickup box tie down hook. Eight (8) required per truck.
Bumpers, tailgate. Mounts on pillar.
Tips, sun visor rubber.
Bumpers, glovebox door.