Hood to Cowl Weatherstrip
p/n: 70-3541-42
Cowl top panel to hood seal. Sixty-seven and seven eighths' inches (67-7/8") long. Fully molded rubber with fifteen (15) metal clips installed along perimeter of weatherstrip.
Window Felt Beltline Weatherstrips
p/n: 80-0973-57
An Original equipment style side window horizontal weatherstrip set (also known as beltline weatherstrip). This four (4) piece set includes inner and outer window felt beltline weatherstrips for each door window. These strips come ready to install with finished ends and body curvature bends for a factory like appearance.
Rear Door Weatherstrips
p/n: 70-4320-72
This Rear Door Weatherstrip pair is designed from the original parts for superior fitment and seal. These primary rear door weatherstrips mount directly on the vehicle body to seal the driver and passenger doors when closed.
Rear Gate to Body Weatherstrip
p/n: 70-4318-85
This Rear Gate to Body Weatherstrip is designed from the original part for superior fitment and seal. This weatherstrip mounts on the body to seal the rear gate.
Windshield Gasket
p/n: 70-2453-50
This windshield gasket is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the front glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation.
Front Door Vent Window Weatherstrips
p/n: 20-0963-55
These Front Door Vent Window Weatherstrips are designed from the original parts for superior fitment and seal. The pieces are molded as left and right and are one-piece with the division post weatherstrip.
Front Door Weatherstrips
p/n: 70-2431-72
This Door Weatherstrip pair is the primary door to body weatherstrip for both front doors. The proper extrusion cross section dense rubber with a bonded adhesive strip.
Rear Window Gasket with Groove
p/n: 20-0972-81
This Rear Window Gasket with Groove mounts around the full perimeter of the back glass and has properly molded corners for a precise, factory fit. It also has the groove or slot to accommodate the outer edge's decorative (chrome) molding.
Front Door Weatherstrips
p/n: 70-4319-72
This Front Door Weatherstrip pair is designed from the original parts for superior fitment and seal. These primary front door weatherstrips mount (push pin) directly on the vehicle body to seal the driver (LH) and passenger (RH) doors when closed.
Tailgate To Body Weatherstrip
p/n: 70-4020-45
This Tailgate To Body Weatherstrip is properly molded from originals for a factory like fit and appearance.
Front Door Vent Window Weatherstrip Set
p/n: 70-2147-55
This Front Door Vent Window Weatherstrip Set is the Two-Piece style where the main vent window and division post seal are separate pieces. The division post seals contain a metal core with attaching tabs and the main seals are molded as left and right.
Rear Window Gasket - No Groove
p/n: 20-0825-81
This Rear Window Gasket is designed from the original part for superior fitment and seal. The gasket mounts around the full perimeter of the back glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation.
Windshield Gasket with Groove
p/n: 70-1917-50
This Windshield Gasket is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the front glass and requires a locking strip for installation (not included). Locking strips are available in either black or chrome.
Windshield Gasket without Groove
p/n: 70-1916-50
This Windshield Gasket without Groove mounts around the full perimeter of the front glass. This is a standard black gasket without a reveal molding lockstrip trim groove. Manufactured to original specifications and from high quality materials.
Front Door Weatherstrips - Full Size
p/n: 70-2994-72
This Front Door Weatherstrip pair is designed from the original parts for superior fitment, finish and function. These primary door weatherstrips mount ( pin and glue) directly to the left and right doors sealing the full perimeter of the doors against the vehicle body when the door is closed. For full size doors.
T-Top Weatherstrips
p/n: 20-2814-68
This T-Top Weatherstrip fits on the removable roof inserts of the vehicle and seals the side window when the window is fully raised.
Door Weatherstrips - Left and Right
p/n: 70-4520-72
This Door Weatherstrip pair is designed from the original parts for superior fitment and seal. These door weatherstrips mount, with pre-installed pins, directly on the vehicle body to seal the driver and passenger doors when closed.
Front or Rear Door Weatherstrips
p/n: 70-2513-72
This Door Weatherstrip pair is designed from the original parts for superior fitment and seal. These door weatherstrips mount directly to the body to seal against the full perimeter of both the front (left / right) or rear (left / right) doors. This is the primary door to body weatherstrip.
Rear Window Gasket
p/n: 70-2458-81
This Rear Window Gasket is designed from the original part for superior fitment and seal. The gasket mounts around the full perimeter of the back glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation.
Rear Window Gasket without Groove
p/n: 70-1722-81
This Rear Window Gasket without Groove mounts around the full perimeter of the back glass and has properly molded corners for a precise, factory fit. Fitted gasket provides a formed, seamless seal.
Rear Window Gasket with Groove
p/n: 70-1926-81
This Rear Window Gasket with Groove set contains the rear window gasket itself and the corner joint sleeves (stainless finish, can be painted black). The gasket mounts around the full perimeter of the back glass and has properly molded corners for a precise, factory fit.
Front Door Weatherstrips
p/n: 20-2830-72
This Door Weatherstrip pair is designed from the original parts for superior fitment and seal. These door seals push-on directly to the body to seal against the full perimeter for both doors.
Window Felt Outer Beltline Weatherstrips
p/n: 80-0533-57
This is an Original material style Outer side window horizontal weatherstrip set (also known as beltline weatherstrip). This ready to install two (2) piece beltline set includes Only the Outer seals (the part sealing the outside of the vehicle) for the door side windows. For vehicles without Reveal Molding on door.
Side Window Glass Rear Weatherstrips
p/n: 82-0158-68
This Side Window Glass Rear Weatherstrip pair is designed from the original part for superior fitment and seal. This part attaches to the rear vertical B-post edge of the side windows for coupe and hatchback models.
Window Felt Outer Beltline Weatherstrips
p/n: 80-0418-57
This is a Original material OEM style side window horizontal weatherstrip set (also known as beltline weatherstrip). This two (2) piece set includes Left and Right Outer Only window felt beltline weatherstrips for each door side window.
Window Felt Outer Beltline Weatherstrips
p/n: 80-0540-57
Original equipment style side window outer horizontal seal (also known as beltline weatherstrip). These strips wipe the side windows when the glass is lowered.
Windshield A-Pillar Post Weatherstrips
p/n: 82-0154-68
This Windshield A-Pillar Post Weatherstrip pair is designed from the original part for superior fitment and seal. The Left and Right weatherstrip pair installs on A-pillar posts and seals front edge of door window to the body windshield frame.
Window Felt Beltline Weatherstrips
p/n: 80-1038-57
This Window Felt Beltline Weatherstrip (also known as beltline weatherstrip) set is made of a high quality material. This four (4) piece set includes inner and outer window felt beltline weatherstrips for the driver and passenger doors of vented models.
Taillight Housing To Body Gaskets
p/n: 70-4544-15
This Taillight Housing to Body Gasket pair is designed from the original part for superior fitment and seal. These reproduction seals fits between the taillight housing and the vehicle body to keep water and debris out of the trunk or hatch.
Tailgate Weatherstrip
p/n: 70-3009-84
This Tailgate Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts to the sides and bottom of the tailgate with properly spaced plastic clips. Includes molded ends.
Upper Liftgate Weatherstrip
p/n: 70-4323-83
This Upper Liftgate Weatherstrip is designed from the original part for superior fitment and seal. This weatherstrip mounts (push pin) directly on the vehicle body to seal the liftgate door when closed.
Side Window Glass Run Channels
p/n: 70-3261-58
This Side Window Glass Run Channel pair is designed from the original part for superior fitment and seal. These two (2) pieces of flexible window run channel are for the sides and top of door windows.
Rear Window Gasket without Groove - Standard Cab
p/n: 70-4521-83
This Rear Windshield Gasket for Standard Cabs mounts around the full perimeter of the rear glass and has properly molded corners for a precise, factory fit. This is a standard black gasket with NO reveal molding groove.
Trunk Weatherstrip
p/n: 82-0033-84
This Trunk Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.
Window Felt Beltline Weatherstrips
p/n: 80-1037-57
This four (4) piece Window Felt Beltline Weatherstrips includes the inner and outer window felt beltline weatherstrips for the driver and passenger doors of non-vented models.
Quarter Window Lockstrip - BLACK
p/n: 70-3202-52
This Quarter Window Lockstrip is designed from the original part for superior fitment and function. This black lockstrip inserts into the weatherstrip to lock in the window glass. Requires 2 sets per vehicle.
Flexible Plastic Chrome Molding
p/n: 20-0828-83
This Flexible Plastic Chrome Molding is designed to go into the groove around the perimeter of the glass. It is a flexible plastic strip with a decorative chrome mylar finish and two (2) clips to join the ends.
Radius Arm & Axle Pivot Bushing Set
p/n: 20-0779-32
This Radius Arm and Axle Pivot Bushings Set is a quality reproduction of the original factory part(s). This six (6) piece set includes two (2) each C5TZ-3B177-A, two (2) each D9TZ-3B203-A, and two (2) each E6TZ-3B203-A top quality bushings. Fits two-wheel (2WD) drive trucks.
Side Window Glass Run Channels
p/n: 70-2514-58
This Side Window Glass Run Channel pair is designed from the original part for superior fitment and seal. These two (2) pieces of flexible window run channel are for the sides and top of door windows.
Heat and Sound Insulator Underlayment
p/n: 70-4676-88
This single piece die-cut Heat and Sound Insulator Underlayment for floors lays under the carpeting's felt mat. This underlayment will decrease road noise and decrease heat inside the trucks interior compartment. Pre-cut and ready to be installed into your vehicle to improve driving comfort.
T-Top Side Rail Weatherstrip Metal Retainer Channels
p/n: 70-4708-68
This T-Top Side Rail Weatherstrip Metal Retainer Channel pair is designed from the original part for superior fitment and functon. These channels mount to the removable T-Top panels. The channels hold the side rail rubber weatherstrip to the T-Top glass panel.
Liftgate Weatherstrip
p/n: 70-3008-84
This Liftgate - Upper Tailgate Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the liftgate with properly spaced plastic clips.
Hood to Cowl Weatherstrip
p/n: 70-4280-43
This Hood to Cowl Weatherstrip is designed from the original part for superior fitment and seal. An exact reproduction of the original profile. This seal mounts at the rear of the engine bay to seal between the hood and vehicle body cowl.
Trunk Weatherstrip
p/n: 82-0217-84
This Trunk Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.
T-Top Drip Edge Flap Seals - Plastic
p/n: 70-4331-68
This T-Top Outer Drip Edge Flap Seal pair is designed from the original part for superior fitment and seal. These plastic "flap seal" pieces install on the T-Top itself. Replacing these will aid in reducing wind noise and keep rain out of your T-Top roofed F-body.
T-Top Drip Edge Flap Seals - Rubber
p/n: 70-4707-68
This T-Top Outer Drip Edge Flap Seal pair is designed from the original part for superior fitment and seal. These rubber "flap seal" pieces install on the T-Top itself. Replacing these will aid in reducing wind noise and keep rain out of your T-Top roofed F-body.
Window Felt Outer Beltline Weatherstrips
p/n: 80-0062-57
This is an Original material style outer side window horizontal weatherstrip set (also known as beltline weatherstrip). This ready to install two (2) piece beltline set includes only the outer seals (the part sealing the outside of the vehicle) for the side windows.
Window Felt Inner Beltline Weatherstrips
p/n: 80-0417-57
This is a high-quality material Window Felt Inner Beltline side window horizontal weatherstrip set (also known as beltline weatherstrip). This two (2) set includes only the inner seals (the part sealing the interior of the car) for the door side windows.
Rear of Door Run Channel Seals - Convertible & T-Top
p/n: 70-4654-58
This Rear of Door Run Channel Seal pair is designed from the original part for superior fitment, finish and function. This window run channel seal fits at the end of the side window glass run channel. Molded as left and right.
Front Door Glass Run Channel
p/n: 70-4321-58
This Front Door Glass Run Channel is designed from the original part for superior fitment and function. The glass run channel presses into the door channel to guide the door glass. This single piece fits either the driver (LH) or passenger (RH) front door.
Front Door Vent Window Weatherstrips
p/n: 70-1924-55
These Front Door Window Weatherstirps are the One-Piece style with the attached division post seal. They are molded as left and right and designed from the original parts for superior fitment and seal.
Lower Liftgate Weatherstrip
p/n: 70-4324-83
This Lower Liftgate Weatherstrip is designed from the original part for superior fitment and seal. This weatherstrip mounts (push pins) on the liftgate frame and closes against the vehicle body.
Quarter Window Lockstrip - CHROME
p/n: 70-3203-52
This Quarter Window Lockstrip is designed from the original part for superior fitment and function. This chrome lockstrip inserts into the weatherstrip to lock in the window glass. Requires 2 sets per vehicle.
Window Locking Strip - Chrome
p/n: 70-2196-52
This Chrome Locking Strip is used to retain windshield gaskets in pickups and vans. Designed from the original part for superior fitment, finish and function. Available in 16ft. lengths.
Front Door Weatherstrips
p/n: 70-4758-72
This Front Door Weatherstrip pair is designed from the original part for superior fitment and seal. Push-on pin type door weatherstrips mount directly to the full perimeter of the front doors to seal against the van body when closed.
Rear Door Glass Run Channel
p/n: 70-4322-58
This Rear Door Glass Run Channel is designed from the original part for superior fitment and seal. The glass run channel presses into the door channel to guide the door glass. This single piece fits either the driver (LH) or passenger (RH) front doors.
Splash Apron / A-Arm Dust Shield Fillers
p/n: 70-4927-45
This Splash Apron / A-Arm Dust Shield Filler pair is designed from the original part for superior fitment and function. Filler pieces are die cut from quality 3/32" masticated rubber to authentic original dimensions.
Rear Cargo Door Hinge Gaskets Set
p/n: 60-0659-69
This four (4) piece molded Rear Cargo Door Hinge Gasket Set is made to original specifications for proper fitment. Seals are fully molded from top quality rubber to ensure durability, fitment and proper seal.
Front Suspension Rubber Bumper Set
p/n: 82-0176-32
Front Suspension Rubber Bumper Kit - A four (4) piece set with both upper and lower arm rubber bumpers in one set.
Sunroof - On Body Weatherstrip
p/n: 70-4650-45
This Sunroof - On Body Weatherstrip is designed from the original part for superior fitment and seal. With push-on installation, the weatherstrip fits onto the molding channel that follows the sunroof trim on the body of the car. Seals the interior / exterior to prevent water, debris, and road noise infiltration.
Sunroof - On Glass Weatherstrip
p/n: 70-4649-45
This Sunroof - On Glass Weatherstrip is designed from the original part for superior fitment and seal. With push-on installation this weatherstrips wraps around the entirety of the sunroof glass. Weatherstrip seals the interior / exterior to prevent water, debris, and road noise infiltration.
Front Door Vent Window Weatherstrips
p/n: 70-2702-55
These Front Door Vent Window Weatherstrips are designed from the original parts for superior fitment and seal. The pieces are molded as left and right and are one piece with the division post seal.
Tailgate Glass Run Channel
p/n: 70-3001-58
This Tailgate Glass Run Channel presses into the channel in the rear of the shell and the glass then rolls up into the run channel. Made from original specs and from high quality ozone resistant materials to fit your vehicle.
Splash Apron Dust Shield Fillers
p/n: 70-2723-45
This two (2) piece Splash Apron Dust Shield Filler pair is designed from the original part for superior fitment and seal. Filler pieces are die cut from quality masticated rubber to authentic original dimensions. Left and Right pieces install on front inner fender apron to frame.
Tailgate Weatherstrip
p/n: 70-2434-72
This Tailgate Weatherstrip reproduction is designed from the original part for superior fitment and seal. This weatherstrip mounts on three (3) sides of the tailgate with weatherstrip adhesive (not included).
GM Window Guide Assortment Set
p/n: 70-4729-62
A thirty (30) piece General Motors Window Guide Assortment Set with popular size coverage in a convenient and economic package. Assortment comes in convenient, translucent, durable polypropylene box.
Trunk Or Hatchback Weatherstrip
p/n: 82-0038-84
This Trunk Or Hatchback Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk or hatchback opening directly to the body.
Hood to Cowl Weatherstrip
p/n: 70-2722-43
This Hood to Cowl Weatherstrip is designed from the original part for superior fitment and seal. A reproduction using sponge rubber extrusion and pre-installed fastener clips.
Cowl to Fender Filler Weatherstrips
p/n: 70-3940-43
This Cowl To Fender Filler Weatherstrip pair is made from top quality rubber and designed from originals for a superior fitment and seal.
Hatchback Weatherstrip
p/n: 20-2864-84
This Hatchback Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the hatch area directly to the body.
Gearshift Knob
p/n: 20-0763-24
This black column shift lever Gearshift Knob is designed from the original part for a superior fit and finish. This reproduction part is a direct screw on replacement for that broken, aged-out original knob.
Hood to Cowl Weatherstrip
p/n: 70-4326-43
This Hood To Cowl Weatherstrip is designed from the original part for superior fitment and seal. This weatherstrip installs at the rear of the engine bay to seal between the hood and vehicle body cowl.
Hood To Radiator Weatherstrip
p/n: 70-4325-43
This Hood To Radiator Weatherstrip is designed from the original part for superior fitment and seal. An exact reproduction of the original profile. This weatherstrip mounts (push-pin) under the front of the hood and seals against the radiator.
Liftgate Weatherstrip
p/n: 70-4134-84
This Liftgate Weatherstrip seal is designed from the original part for superior fitment and seal. This primary weatherstrip mounts on the vehicle body and seals the liftgate.
Windshield Frame Cowl Gasket
p/n: 70-4738-43
This Windshield Frame Cowl Gasket is designed from the original part for superior fitment and seal. A fully molded reproduction of the original. This weatherstrip gasket installs at the lower windshield frame base.
T-Top Beaded Felt Weatherstrip
p/n: 70-4651-68
This T-Top Beaded Felt Weatherstrip is designed from the original part for superior fitment, finish and function. This felt weatherstrip installs at the front and rear edges of the roof at the T-Top opening. Sold Individually - Purchase two (2) if replacing both Front and Rear.
Chrome Mylar Locking Strip
p/n: 70-3425-52
This Chrome Mylar Locking Strip inserts into the weatherstrip to lock in the glass for the rear window. The strip is designed to be installed during glass replacement.
Radiator Side Air Baffles
p/n: 70-4921-31
This Radiator Side Air Baffle pair is designed from the original part for superior fitment and function. Left and Right baffles are die cut from quality 3/32” masticated rubber to authentic original dimensions.
Radiator mounting pad
p/n: 70-2709-31
Support, lower radiator. See our #70-2712-31 for upper support cushion.
Radiator mounting pad
p/n: 70-2712-31
Support, upper radiator. See our #70-2709-31 for lower support cushion.
Push-Out Window Weatherstrip
p/n: 70-4751-76
This Push-Out Window Weatherstrip is designed from the original part for superior fitment, appearance and seal. This window weatherstrip fits to the body around the window opening to seal the push out window when closed.
Front Door Glass Channel Triangle Weatherstrips
p/n: 70-4710-58
This Front Door Glass Channel Triangle Weatherstrip pair is manufactured to OEM specifications to install for an authentic fit, finish and function. Correct six (6") inch vertical seal at the front edge of the door glass.
AC Condenser - Lower Mount
p/n: 70-2713-31
This AC Condenser - Lower Mount pair is designed from the original part for superior fitment and function. These mounts install to isolate and reduce road vibrations to the air conditioning condenser. Replaces aged, broken or missing mounts.
Hood to Cowl Weatherstrip
p/n: 70-4135-43
This Hood To Cowl Weatherstrip is designed from the original part for superior fitment and seal. This seal mounts at the rear of the engine bay directly to the body.
Trunk Weatherstrip
p/n: 20-2865-84
This Trunk Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.
Stabilizer Bar End Link Repair Set
p/n: 20-0783-33
This five (5) piece Stabilizer Bar End Link Repair Set is for the front or rear stabilizer bar. Two (2) per set. Used on Front for 1975-1979 F150-F350 series 4x2. Used on Rear for 1980-1989 F100-F350 series.
Hood to Cowl Weatherstrip
p/n: 70-3448-42
This Hood to Cowl weatherstrip is for superior fitment and sealing. This extruded sponge rubber clinch seal strip mounts at the rear of the engine bay directly to the body on the cowl lip.
Firewall to Hood Weatherstrip
p/n: 70-4200-43
This Firewall to Hood Weatherstrip is designed from the original part for superior fitment and seal. This seal has the proper cowl radius to fit correctly. Mounts with ten (10) pre-installed clips at the rear of the engine bay directly to the body.
Body Plug Set
p/n: 70-4648-20
This thirty (30) piece Body Plug set is designed from the original parts for superior fitment and sealing. Made from high quality EPDM dense rubber, this set replaces dried, broken, and missing body plugs.
Engine Top Cover Weatherstrip
p/n: 70-4750-88
This Engine Top Cover Gasket is an original design reproduction made from top quality sponge rubber. This gasket attaches between the removable engine cover ("doghouse") and the vehicle firewall / floorboard.
Top of Door Weatherstrips - Roof Rail
p/n: 70-4022-73
This Top of Door Weatherstrip - Roof Rail pair for the left and right side doors seal the door window frame to the roof hardtop and to the windshield frame.
Window Gasket Locking Strip - Chrome
p/n: 70-1919-52
This chrome appearing Window Gasket Locking Strip is designed from the original part for superior fitment and seal. Locking strip serves as the front or rear window gasket retainer. Sixteen (16') foot length single piece, one application, for complete coverage.