Splash Apron / A-Arm Dust Shield Filler
p/n: 70-2799-45
This Splash Apron / A-Arm Dust Shield Filler pair is designed from the original part for superior fitment and seal. Filler pair pieces are die cut from quality masticated rubber to authentic original dimensions. Left and Right pieces fit over suspension a-arms and inside front inner fenders.
Splash Apron / A-Arm Dust Shield Fillers
p/n: 70-4927-45
This Splash Apron / A-Arm Dust Shield Filler pair is designed from the original part for superior fitment and function. Filler pieces are die cut from quality 3/32" masticated rubber to authentic original dimensions.
Splash Apron Dust Shield Fillers
p/n: 70-2723-45
This two (2) piece Splash Apron Dust Shield Filler pair is designed from the original part for superior fitment and seal. Filler pieces are die cut from quality masticated rubber to authentic original dimensions. Left and Right pieces install on front inner fender apron to frame.
Stabilizer Bar Bushings
p/n: 70-4678-34
This Stabilizer Bar to Frame Bushing pair may fit either front or rear stabilizer / sway bars depending on the vehicle. Manufactured with quality materials to original specifications.
Stabilizer Bar End Link Repair Set
p/n: 20-0783-33
This five (5) piece Stabilizer Bar End Link Repair Set is for the front or rear stabilizer bar. Two (2) per set. Used on Front for 1975-1979 F150-F350 series 4x2. Used on Rear for 1980-1989 F100-F350 series.
Stabilizer Bar End Link Set
p/n: 60-0221-33
Twenty-two (22) piece Stabilizer Bar End Link set for both sides of one (1) vehicle, fits front or rear bar. Order two (2) sets for vehicles with front and rear stabilizer bars. Hex head bolt 3/8"-16 NF x 6-15/16" long. Comes with metal sleeve, metal cup washers and rubber grommets.
Steering Column At Floor Seal
p/n: 70-3490-36
This Steering Column At Floor Seal is designed from the original part for superior fitment and sealing. The seal is die cut from quality masticated rubber to authentic original dimensions. This part fits around the steering column to seal the column through the body floor pan.
Sunroof - On Body Weatherstrip
p/n: 70-4650-45
This Sunroof - On Body Weatherstrip is designed from the original part for superior fitment and seal. With push-on installation, the weatherstrip fits onto the molding channel that follows the sunroof trim on the body of the car. Seals the interior / exterior to prevent water, debris, and road noise infiltration.
Sunroof - On Glass Weatherstrip
p/n: 70-4649-45
This Sunroof - On Glass Weatherstrip is designed from the original part for superior fitment and seal. With push-on installation this weatherstrips wraps around the entirety of the sunroof glass. Weatherstrip seals the interior / exterior to prevent water, debris, and road noise infiltration.
Tailgate Bumper
p/n: 20-0694-45
These Tailgate Bumpers are sold as pair. The bumpers fit in brackets and comes with chains.
Tailgate Glass Run Channel
p/n: 70-3001-58
This Tailgate Glass Run Channel presses into the channel in the rear of the shell and the glass then rolls up into the run channel. Made from original specs and from high quality ozone resistant materials to fit your vehicle.
Tailgate To Body Weatherstrip
p/n: 70-4020-45
This Tailgate To Body Weatherstrip is properly molded from originals for a factory like fit and appearance.
Tailgate Weatherstrip
p/n: 70-3009-84
This Tailgate Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts to the sides and bottom of the tailgate with properly spaced plastic clips. Includes molded ends.
Tailgate Weatherstrip
p/n: 70-2434-72
This Tailgate Weatherstrip reproduction is designed from the original part for superior fitment and seal. This weatherstrip mounts on three (3) sides of the tailgate with weatherstrip adhesive (not included).
Tailgate Window Felt Beltline Weatherstrips
p/n: 80-0804-57
This Tailgate Glass Window Felt Beltline Weatherstrip reproduction pair is designed from the original part for superior fitment and seal. This window felt molding mounts to the tailgate with the included fasteners.
Tailgate Window Felt Weatherstrips
p/n: 80-1058-57
This Tailgate Window Felt Weatherstrip reproduction set is designed from the original part for superior fitment and seal. This window felt molding mounts to the tailgate with attached clips. These window felts wipe the tailgate window glass when the glass is lowered.
Taillight Housing To Body Gaskets
p/n: 70-4544-15
This Taillight Housing to Body Gasket pair is designed from the original part for superior fitment and seal. These reproduction seals fits between the taillight housing and the vehicle body to keep water and debris out of the trunk or hatch.
Top of Door Weatherstrips - Roof Rail
p/n: 70-4022-73
This Top of Door Weatherstrip - Roof Rail pair for the left and right side doors seal the door window frame to the roof hardtop and to the windshield frame.
Transmission Mount
p/n: 70-2058-25
This Transmission Mount is a new aftermarket replacement mount manufactured to meet or exceed factory specifications.. One (1) required per vehicle.
Trunk - Decklid Bumper
p/n: 70-3528-87
This Trunk-Decklid Bumper is a quality reproduction of the original factory part. This adjustable rubber bumper attaches to the vehicle body to support / cushion the trunk lid closure.
Trunk Bumpers - Coupe or Convertible
p/n: 70-4732-87
This Trunk Bumper pair is a quality reproduction of the original factory part. These dense rubber bumpers attach to the vehicle body to support / cushion the trunk lid closure.
Trunk Or Hatchback Weatherstrip
p/n: 82-0038-84
This Trunk Or Hatchback Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk or hatchback opening directly to the body.
Trunk Weatherstrip
p/n: 20-2865-84
This Trunk Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.
Trunk Weatherstrip
p/n: 82-0217-84
This Trunk Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.
Trunk Weatherstrip
p/n: 82-0033-84
This Trunk Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.
T-Top Beaded Felt Weatherstrip
p/n: 70-4651-68
This T-Top Beaded Felt Weatherstrip is designed from the original part for superior fitment, finish and function. This felt weatherstrip installs at the front and rear edges of the roof at the T-Top opening. Sold Individually - Purchase two (2) if replacing both Front and Rear.
T-Top Body Weatherstrip Kit with Plastic Drip Edge
p/n: 90-3381-90
This twelve (12) piece Body Weatherstrip Kit includes the major weatherstrip components needed for the body of your T-Top Chevrolet Camaro or Pontiac Firebird with plastic drip edges. We’ve put everything together in one simple and convenient kit.
T-Top Body Weatherstrip Kit with Rubber Drip Edge
p/n: 90-3599-90
This twelve (12) piece Body Weatherstrip Kit includes the major weatherstrip components needed for the body of your T-Top Chevrolet Camaro or Pontiac Firebird with plastic drip edges. We’ve put everything together in one simple and convenient kit.
T-Top Drip Edge Flap Seals - Plastic
p/n: 70-4331-68
This T-Top Outer Drip Edge Flap Seal pair is designed from the original part for superior fitment and seal. These plastic "flap seal" pieces install on the T-Top itself. Replacing these will aid in reducing wind noise and keep rain out of your T-Top roofed F-body.
T-Top Drip Edge Flap Seals - Rubber
p/n: 70-4707-68
This T-Top Outer Drip Edge Flap Seal pair is designed from the original part for superior fitment and seal. These rubber "flap seal" pieces install on the T-Top itself. Replacing these will aid in reducing wind noise and keep rain out of your T-Top roofed F-body.
T-Top Headliner Retainer
p/n: 70-4652-88
This T-Top Headliner Retainer is designed from the original part for superior fitment, finish and function. This retainer strip pinches the headliner to the body to hold it in place. Sold Individually - Purchase two (2) to complete the driver and passenger overhead panel.
T-Top On Body Weatherstrips
p/n: 83-1002-68
This T-Top Body Weatherstrip pair is designed from the original part for superior fitment and seal. This part fits on the body of the vehicle and seals the front section of the side window and the removable section of the roof.
T-Top Panel Weatherstrips
p/n: 82-0175-68
This T-Top Panel Weatherstrip pair installs around the perimeter of the removable T-Top Panels. Includes molded corners and steel cores across window side. Fits later integral metal retainer / 18 plastic push pins T-Top panels.
T-Top Roof Rail on Body Weatherstrip
p/n: 20-2815-68
This T-Top Roof Rail on Body Weatherstrip is the inner seal between the T-Top panel and the body. The pillar length measures approximately thirty (38) inches.
T-Top Roof Side Rail Weatherstrips
p/n: 83-1003-68
This T-Top Roof Side Rail Weatherstrip pair is designed from the original part for superior fitment and seal. This weatherstrip serves as the over door seal, attaching to the removeable roof section.
T-Top Side Rail Weatherstrip Metal Retainer Channels
p/n: 70-4708-68
This T-Top Side Rail Weatherstrip Metal Retainer Channel pair is designed from the original part for superior fitment and functon. These channels mount to the removable T-Top panels. The channels hold the side rail rubber weatherstrip to the T-Top glass panel.
T-Top Side Rail Weatherstrips
p/n: 82-0186-68
This T-Top Side Rail Weatherstrip pair is designed from the original part for superior fitment and seal. This part fits on the roof of the vehicle and seals the side window when the window is fully raised.
T-Top To Body Weatherstrips
p/n: 83-1000-68
This T-Top To Body Weatherstrip pair installs up the A pillar, into the T-Top opening and back down the C Pillar. Fits models with factory T-top option.
T-Top Trim Panel to Latch Handle Seals
p/n: 20-2806-67
This T-Top Trim Panel to Latch Handle Seal pair is designed from the original part for superior fitment and seal. These seals glue onto the plastic trim panel where latch handle goes through the panel.
T-Top Weatherstrip Set with Plastic Drip Edge
p/n: 90-3597-90
This T-Top Weatherstrip Set is designed from the original part for superior fitment and seal. This eight (8) piece weatherstrip set is for Camaro or Firebird models with Plastic Drip Edges.
T-Top Weatherstrip Set with Rubber Drip Edge
p/n: 90-3598-90
This T-Top Weatherstrip Set is designed from the original part for superior fitment and seal. This eight (8) piece set is for Camaro or Firebird models with Rubber Drip Edges.
T-Top Weatherstrips
p/n: 20-2814-68
This T-Top Weatherstrip fits on the removable roof inserts of the vehicle and seals the side window when the window is fully raised.
Upper Liftgate Weatherstrip
p/n: 70-4323-83
This Upper Liftgate Weatherstrip is designed from the original part for superior fitment and seal. This weatherstrip mounts (push pin) directly on the vehicle body to seal the liftgate door when closed.
Vent Window Pivot Post Rivet
p/n: 70-4757-98
This Vent Window Pivot Post Rivet is used to replace the hinge pivot rivet for both left and right vent window assemblies. Commonly used for General Motors car and truck models.