Side window leading edge
p/n: 70-3444-80
Side window vertical leading edge weatherstrip. This part attaches to the vertical edge of the rear side windows when the rear side windows are fully raised. Molded authentic rubber construction with metal core, this part does not include the chrome piece
Heat and Sound Insulator Underlayment
p/n: 70-4676-88
This single piece die-cut Heat and Sound Insulator Underlayment for floors lays under the carpeting's felt mat. This underlayment will decrease road noise and decrease heat inside the trucks interior compartment. Pre-cut and ready to be installed into your vehicle to improve driving comfort.
T-Top Side Rail Weatherstrip Metal Retainer Channels
p/n: 70-4708-68
This T-Top Side Rail Weatherstrip Metal Retainer Channel pair is designed from the original part for superior fitment and functon. These channels mount to the removable T-Top panels. The channels hold the side rail rubber weatherstrip to the T-Top glass panel.
Liftgate Weatherstrip
p/n: 70-3008-84
This Liftgate - Upper Tailgate Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the liftgate with properly spaced plastic clips.
Hood to Cowl Weatherstrip
p/n: 70-4280-43
This Hood to Cowl Weatherstrip is designed from the original part for superior fitment and seal. An exact reproduction of the original profile. This seal mounts at the rear of the engine bay to seal between the hood and vehicle body cowl.
Convertible Quarter Window Top Frame At Beltline Seals
p/n: 70-4545-61
This Convertible Quarter Window Top Frame At Beltline Seal pair is designed from the original part for superior fitment and seal. This seal fills the gap where the top, beltline moulding and the quarter window meet. A quality manufactured reproduction.
Trunk Weatherstrip
p/n: 82-0217-84
This Trunk Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.
T-Top Drip Edge Flap Seals - Plastic
p/n: 70-4331-68
This T-Top Outer Drip Edge Flap Seal pair is designed from the original part for superior fitment and seal. These plastic "flap seal" pieces install on the T-Top itself. Replacing these will aid in reducing wind noise and keep rain out of your T-Top roofed F-body.
T-Top Drip Edge Flap Seals - Rubber
p/n: 70-4707-68
This T-Top Outer Drip Edge Flap Seal pair is designed from the original part for superior fitment and seal. These rubber "flap seal" pieces install on the T-Top itself. Replacing these will aid in reducing wind noise and keep rain out of your T-Top roofed F-body.
Window Felt Outer Beltline Weatherstrips
p/n: 80-0062-57
This is an Original material style outer side window horizontal weatherstrip set (also known as beltline weatherstrip). This ready to install two (2) piece beltline set includes only the outer seals (the part sealing the outside of the vehicle) for the side windows.
Rear of Door Run Channel Seals - Convertible & T-Top
p/n: 70-4654-58
This Rear of Door Run Channel Seal pair is designed from the original part for superior fitment, finish and function. This window run channel seal fits at the end of the side window glass run channel. Molded as left and right.
Front Door Glass Run Channel
p/n: 70-4321-58
This Front Door Glass Run Channel is designed from the original part for superior fitment and function. The glass run channel presses into the door channel to guide the door glass. This single piece fits either the driver (LH) or passenger (RH) front door.
Front Door Vent Window Weatherstrips
p/n: 70-1924-55
These Front Door Window Weatherstirps are the One-Piece style with the attached division post seal. They are molded as left and right and designed from the original parts for superior fitment and seal.
Lower Liftgate Weatherstrip
p/n: 70-4324-83
This Lower Liftgate Weatherstrip is designed from the original part for superior fitment and seal. This weatherstrip mounts (push pins) on the liftgate frame and closes against the vehicle body.
Quarter Window Lockstrip - CHROME
p/n: 70-3203-52
This Quarter Window Lockstrip is designed from the original part for superior fitment and function. This chrome lockstrip inserts into the weatherstrip to lock in the window glass. Requires 2 sets per vehicle.
Window Locking Strip - Chrome
p/n: 70-2196-52
This Chrome Locking Strip is used to retain windshield gaskets in pickups and vans. Designed from the original part for superior fitment, finish and function. Available in 16ft. lengths.
Front Door Weatherstrips
p/n: 70-4758-72
This Front Door Weatherstrip pair is designed from the original part for superior fitment and seal. Push-on pin type door weatherstrips mount directly to the full perimeter of the front doors to seal against the van body when closed.
Rear Door Glass Run Channel
p/n: 70-4322-58
This Rear Door Glass Run Channel is designed from the original part for superior fitment and seal. The glass run channel presses into the door channel to guide the door glass. This single piece fits either the driver (LH) or passenger (RH) front doors.
Splash Apron / A-Arm Dust Shield Fillers
p/n: 70-4927-45
This Splash Apron / A-Arm Dust Shield Filler pair is designed from the original part for superior fitment and function. Filler pieces are die cut from quality 3/32" masticated rubber to authentic original dimensions.
Rear Cargo Door Hinge Gaskets Set
p/n: 60-0659-69
This four (4) piece molded Rear Cargo Door Hinge Gasket Set is made to original specifications for proper fitment. Seals are fully molded from top quality rubber to ensure durability, fitment and proper seal.
Quarter Window Felt Outer Beltline Weatherstrips
p/n: 80-1083-57
This is an Original material style outer quarter window horizontal weatherstrip pair (also known as beltline weatherstrip). This ready to install two (2) piece pair includes only the outer seals (the part sealing the outside of the vehicle) for the rear quarter windows.
Sunroof - On Body Weatherstrip
p/n: 70-4650-45
This Sunroof - On Body Weatherstrip is designed from the original part for superior fitment and seal. With push-on installation, the weatherstrip fits onto the molding channel that follows the sunroof trim on the body of the car. Seals the interior / exterior to prevent water, debris, and road noise infiltration.
Sunroof - On Glass Weatherstrip
p/n: 70-4649-45
This Sunroof - On Glass Weatherstrip is designed from the original part for superior fitment and seal. With push-on installation this weatherstrips wraps around the entirety of the sunroof glass. Weatherstrip seals the interior / exterior to prevent water, debris, and road noise infiltration.
Splash Apron
p/n: 70-2729-45
This Splash Apron pair is designed from the original part for superior fitment and seal. Attaches to front inner fenders at the sway bar pass-thru.
Front Door Vent Window Weatherstrips
p/n: 70-2702-55
These Front Door Vent Window Weatherstrips are designed from the original parts for superior fitment and seal. The pieces are molded as left and right and are one piece with the division post seal.
Tailgate Glass Run Channel
p/n: 70-3001-58
This Tailgate Glass Run Channel presses into the channel in the rear of the shell and the glass then rolls up into the run channel. Made from original specs and from high quality ozone resistant materials to fit your vehicle.
Convertible A-Pillar Post Weatherstrip, Left Hand
p/n: 20-2792-63
This A-Pillar Post Weatherstrip is the left-hand side weatherstrip for the convertible windshield pillar post.
Convertible A-Pillar Post Weatherstrip, Right Hand
p/n: 20-2793-63
This A-Pillar Post Weatherstrip is the right-hand side weatherstrip for the convertible windshield pillar post.
Splash Apron Dust Shield Fillers
p/n: 70-2723-45
This two (2) piece Splash Apron Dust Shield Filler pair is designed from the original part for superior fitment and seal. Filler pieces are die cut from quality masticated rubber to authentic original dimensions. Left and Right pieces install on front inner fender apron to frame.
Tailgate Weatherstrip
p/n: 70-2434-72
This Tailgate Weatherstrip reproduction is designed from the original part for superior fitment and seal. This weatherstrip mounts on three (3) sides of the tailgate with weatherstrip adhesive (not included).
GM Window Guide Assortment Set
p/n: 70-4729-62
A thirty (30) piece General Motors Window Guide Assortment Set with popular size coverage in a convenient and economic package. Assortment comes in convenient, translucent, durable polypropylene box.
Trunk Or Hatchback Weatherstrip
p/n: 82-0038-84
This Trunk Or Hatchback Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk or hatchback opening directly to the body.
Hood to Cowl Weatherstrip
p/n: 70-2722-43
This Hood to Cowl Weatherstrip is designed from the original part for superior fitment and seal. A reproduction using sponge rubber extrusion and pre-installed fastener clips.
Door Glass Run Channel - without Vent Window
p/n: 70-4849-58
This Door Glass Run Channel is designed from the original part for superior fitment and function. The glass run simply presses into the front, top and back section of the door channel. This single piece fits either the driver (LH) or passenger (RH) doors without vent windows.
Hatchback Weatherstrip
p/n: 20-2864-84
This Hatchback Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the hatch area directly to the body.
Hinge Pillar Post Filler - Convertible
p/n: 70-4658-63
This convertible Hinge Pillar Post Filler seal is designed from the original part for superior fitment and sealing. This pair of quarter post fillers feature all original details. The seal pair does both LH and RH sides and work to fill the gap between the door gasket and body.
Gearshift Knob
p/n: 20-0763-24
This black column shift lever Gearshift Knob is designed from the original part for a superior fit and finish. This reproduction part is a direct screw on replacement for that broken, aged-out original knob.
Hood to Cowl Weatherstrip
p/n: 70-4326-43
This Hood To Cowl Weatherstrip is designed from the original part for superior fitment and seal. This weatherstrip installs at the rear of the engine bay to seal between the hood and vehicle body cowl.
Hood To Radiator Weatherstrip
p/n: 70-4325-43
This Hood To Radiator Weatherstrip is designed from the original part for superior fitment and seal. An exact reproduction of the original profile. This weatherstrip mounts (push-pin) under the front of the hood and seals against the radiator.
Liftgate Weatherstrip
p/n: 70-4134-84
This Liftgate Weatherstrip seal is designed from the original part for superior fitment and seal. This primary weatherstrip mounts on the vehicle body and seals the liftgate.
Windshield Frame Cowl Gasket
p/n: 70-4738-43
This Windshield Frame Cowl Gasket is designed from the original part for superior fitment and seal. A fully molded reproduction of the original. This weatherstrip gasket installs at the lower windshield frame base.
T-Top Beaded Felt Weatherstrip
p/n: 70-4651-68
This T-Top Beaded Felt Weatherstrip is designed from the original part for superior fitment, finish and function. This felt weatherstrip installs at the front and rear edges of the roof at the T-Top opening. Sold Individually - Purchase two (2) if replacing both Front and Rear.
Chrome Mylar Locking Strip
p/n: 70-3425-52
This Chrome Mylar Locking Strip inserts into the weatherstrip to lock in the glass for the rear window. The strip is designed to be installed during glass replacement.
Cap Seal
p/n: 70-3437-73
Seal, cap on body of door. Located at the striker on door top for right and left sides. Fully molded rubber with two (2) screw holes.
Radiator Side Air Baffles
p/n: 70-4921-31
This Radiator Side Air Baffle pair is designed from the original part for superior fitment and function. Left and Right baffles are die cut from quality 3/32” masticated rubber to authentic original dimensions.