Hardtop Roof Rail Weatherstrips
p/n: 82-0054-68
This Hardtop Roof Rail Weatherstrip pair is made with fully molded ends for a factory like fit. This part fits on the roof of the vehicle and seals the side window when the window is fully raised.
Hardtop Roof Rail Weatherstrips
p/n: 82-0037-68
This Hardtop Roof Rail Weatherstrip pair is made of ozone resistant EPDM sponge rubber with molded A pillar ends and corners for a factory like fit. These high-quality weatherstrips fit on the roof of the vehicle and work to seal the side windows when the window is fully raised.
Hardtop Roof Rail Weatherstrips
p/n: 82-0035-68
This Hardtop Roof Rail Weatherstrip pair is made of high-quality EPDM rubber with fully molded ends for a factory like fit. These weatherstrips fit on the roof of the vehicle and work to seal the side windows when the window is fully raised.
Hatchback Weatherstrip
p/n: 82-0173-84
This Hatchback Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the hatch opening directly to the body.
Hatchback Weatherstrip
p/n: 20-2864-84
This Hatchback Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the hatch area directly to the body.
Hinge Pillar Post Filler - Convertible
p/n: 70-4658-63
This convertible Hinge Pillar Post Filler seal is designed from the original part for superior fitment and sealing. This pair of quarter post fillers feature all original details. The seal pair does both LH and RH sides and work to fill the gap between the door gasket and body.
Hood and Fender Bumper
p/n: 70-3446-42
This Hood / Fender Bumper is a quality reproduction of the original factory part. This adjustable rubber bumper attaches to the front fender to support / cushion the hood closure.
Hood Side Bumper
p/n: 20-0953-42
This Hood Side Bumper is a quality reproduction of the original factory part. This rubber bumper mounts on the front fender to support / cushion the hood closure. Usually requires two (2) bumpers each per vehicle.
Hood To Cowl Weatherstrip
p/n: 82-0215-43
This Hood To Cowl Weatherstrip is designed from the original part for superior fitment and seal. An exact reproduction of the original profile. This weatherstrip installs at the rear of the engine bay to seal between the hood and vehicle body cowl.
Hood to Cowl Weatherstrip
p/n: 70-3541-42
Cowl top panel to hood seal. Sixty-seven and seven eighths' inches (67-7/8") long. Fully molded rubber with fifteen (15) metal clips installed along perimeter of weatherstrip.
Hood to Cowl Weatherstrip
p/n: 70-3448-42
This Hood to Cowl weatherstrip is for superior fitment and sealing. This extruded sponge rubber clinch seal strip mounts at the rear of the engine bay directly to the body on the cowl lip.
Hood to Cowl Weatherstrip
p/n: 70-4280-43
This Hood to Cowl Weatherstrip is designed from the original part for superior fitment and seal. An exact reproduction of the original profile. This seal mounts at the rear of the engine bay to seal between the hood and vehicle body cowl.
Hood to Cowl Weatherstrip
p/n: 70-4135-43
This Hood To Cowl Weatherstrip is designed from the original part for superior fitment and seal. This seal mounts at the rear of the engine bay directly to the body.
Hood to Cowl Weatherstrip
p/n: 70-4326-43
This Hood To Cowl Weatherstrip is designed from the original part for superior fitment and seal. This weatherstrip installs at the rear of the engine bay to seal between the hood and vehicle body cowl.
Hood to Cowl Weatherstrip
p/n: 70-2722-43
This Hood to Cowl Weatherstrip is designed from the original part for superior fitment and seal. A reproduction using sponge rubber extrusion and pre-installed fastener clips.
Hood to Fender Bumper
p/n: 70-2756-42
This Hood to Fender Bumper pair is a quality reproduction of the original factory part. These rubber bumpers attach to the front fender to support / cushion the hood closure.
Hood to Fender Bumper
p/n: 70-3445-42
Bumpers, hood to fender. Set of four (4). Proper cross section with original details approximately five eights (5/8") of an inch wide.
Hood To Fender Bumper Set
p/n: 70-2872-42
These Hood to Fender Bumper are a quality reproduction of the original factory part. The rubber bumper attaches to the front fender to support / cushion the hood closure. Four (4) piece set for two (2) bumpers per side.
Hood to fender weatherstrip
p/n: 70-2728-42
Seal, hood to fender. Mounts on fender at hinge area inside hood opening. Fits around hood hinge assembly to isolate engine compartment from car interior. Replaces factory #E3SZ-16071-B, E3SZ-16072-B.
Hood to radiator weatherstrip
p/n: 70-2721-43
Air deflector, radiator. Mounts to nose of car inside hood opening. Redirects airflow back through radiator core.
Hood To Radiator Weatherstrip
p/n: 70-4325-43
This Hood To Radiator Weatherstrip is designed from the original part for superior fitment and seal. An exact reproduction of the original profile. This weatherstrip mounts (push-pin) under the front of the hood and seals against the radiator.
Inside Door Handle Gaskets
p/n: 70-4811-69
This Inside Door Handle Gasket pair is designed from the original part for an authentic fit, finish, and appearance. Slips onto edge of hole where door handle comes out of the door panel.
Left (Driver's Side) Rear Cargo Door Weatherstrip
p/n: 82-0199-72
This Left Rear Cargo Door Weatherstrip is designed from the original part for superior fitment and sealing. This peel-n-stick weatherstrip is for the left (driver's side) cargo door at the rear of the van.
Liftgate Frame to Glass Weatherstrip
p/n: 70-4847-81
This Body to Liftgate Weatherstrip is designed from the original part for superior fitment and seal. This weatherstrip mounts on the vehicle's liftgate frame where the glass seals against it.
Liftgate Upper Edge Weatherstrip
p/n: 70-4139-85
This Liftgate Upper Edge Weatherstrip seal is designed from the original part for superior fitment and seal. This weatherstrip mounts on the liftgate and seals the upper edge.
Liftgate Weatherstrip
p/n: 70-4134-84
This Liftgate Weatherstrip seal is designed from the original part for superior fitment and seal. This primary weatherstrip mounts on the vehicle body and seals the liftgate.
Liftgate Weatherstrip
p/n: 70-3008-84
This Liftgate - Upper Tailgate Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the liftgate with properly spaced plastic clips.
Lower Liftgate Weatherstrip
p/n: 70-4324-83
This Lower Liftgate Weatherstrip is designed from the original part for superior fitment and seal. This weatherstrip mounts (push pins) on the liftgate frame and closes against the vehicle body.
Lower U-Jamb Lock Pillar Rear Seals
p/n: 70-3954-79
This Lower U-Jamb Lock Pillar Rear Seals pair, one for each door, is designed from originals and made for a like factory fit.
M6-1.0 Anchor Set - GM Vehicles
p/n: 70-4867-46
A top-quality neoprene rubber Well Nut, Washer and Screw Anchor for GM vehicle models. Well nut has a metric M6-1.0 captive brass nut. Overall length is 21/32". Replaces GM factory number #20130258.
Pickup tie down mounting pad
p/n: 20-0885-45
Pad, pickup box tie down hook. Eight (8) required per truck.
Push-Out Window Weatherstrip
p/n: 70-4751-76
This Push-Out Window Weatherstrip is designed from the original part for superior fitment, appearance and seal. This window weatherstrip fits to the body around the window opening to seal the push out window when closed.
Quarter Window Felt Outer Beltline Weatherstrips
p/n: 80-1083-57
This is an Original material style outer quarter window horizontal weatherstrip pair (also known as beltline weatherstrip). This ready to install two (2) piece pair includes only the outer seals (the part sealing the outside of the vehicle) for the rear quarter windows.
Quarter Window Lockstrip - BLACK
p/n: 70-3202-52
This Quarter Window Lockstrip is designed from the original part for superior fitment and function. This black lockstrip inserts into the weatherstrip to lock in the window glass. Requires 2 sets per vehicle.
Quarter Window Lockstrip - CHROME
p/n: 70-3203-52
This Quarter Window Lockstrip is designed from the original part for superior fitment and function. This chrome lockstrip inserts into the weatherstrip to lock in the window glass. Requires 2 sets per vehicle.
Quarter Window Weatherstrip Without Trim Groove
p/n: 70-4024-77
This Quarter Window Weatherstrip Without Trim Groove, left and right gasket, fits the quarter window of the Bronco hardtop.
Quarter Window Weatherstrips with Trim Groove
p/n: 70-2480-77
This Quarter Window Weatherstrip pair is made from ozone resistant EPDM rubber and to the original for an authentic fit and finish. This window weatherstrip has a trim groove for a lockstrip.
Quarter Window Weatherstrips with Trim Groove
p/n: 70-2481-77
This Quarter Window Weatherstrip with Trim Groove pair is designed from the original part for superior fitment and seal. These Left and Right weatherstrips mount around the full perimeter of the quarter glass for a precise, factory fit. For models WITH reveal molding.
Radiator mounting pad
p/n: 70-2709-31
Support, lower radiator. See our #70-2712-31 for upper support cushion.
Radiator mounting pad
p/n: 70-2712-31
Support, upper radiator. See our #70-2709-31 for lower support cushion.
Radiator Side Air Baffles
p/n: 70-4921-31
This Radiator Side Air Baffle pair is designed from the original part for superior fitment and function. Left and Right baffles are die cut from quality 3/32” masticated rubber to authentic original dimensions.
Radius Arm & Axle Pivot Bushing Set
p/n: 20-0779-32
This Radius Arm and Axle Pivot Bushings Set is a quality reproduction of the original factory part(s). This six (6) piece set includes two (2) each C5TZ-3B177-A, two (2) each D9TZ-3B203-A, and two (2) each E6TZ-3B203-A top quality bushings. Fits two-wheel (2WD) drive trucks.
Rear Cargo Door Hinge Gaskets Set
p/n: 60-0659-69
This four (4) piece molded Rear Cargo Door Hinge Gasket Set is made to original specifications for proper fitment. Seals are fully molded from top quality rubber to ensure durability, fitment and proper seal.
Rear Cargo Door Upper Drip Rail
p/n: 70-4180-85
This Rear Cargo Door Upper Drip Rail is a reproduction designed for superior fitment and seal. This weatherstrip mounts on the upper portion of the body above the rear opening cargo doors.
Rear Cargo Door Weatherstrip Set
p/n: 90-0154-72
This three (3) piece Rear Cargo Door Set includes the major weatherstrip components needed for the two (2) rear doors of your vehicle project. These parts are reproductions designed from originals with fully molded corners and corrosion resistant brass end pieces for superior performance and a factory fit.
Rear Cargo Door Weatherstrips
p/n: 70-4162-72
This two (2) piece Rear Cargo Door Weatherstrip set is for the Rear Cargo (Barn) Doors. It is designed from the original parts for superior fitment and seal. These weatherstrips mount directly to the doors sealing the two together when closed.
Rear Cargo Door Weatherstrips
p/n: 70-1925-72
This Rear Cargo Door Weatherstrip pair is designed from the original parts for superior fitment and seal. An authentic design with one door made with perimeter configuration, and other door seal made in single strip like original.
Rear Door Glass Run Channel
p/n: 70-4322-58
This Rear Door Glass Run Channel is designed from the original part for superior fitment and seal. The glass run channel presses into the door channel to guide the door glass. This single piece fits either the driver (LH) or passenger (RH) front doors.
Rear Door Vent Window Weatherstrips
p/n: 70-4317-55
This Rear Door Vent Window Weatherstrip pair is designed from the original parts for superior fitment and seal. A two (2) piece pair that fits both driver (Left) and passenger (Right) rear door vent / wing window assemblies.
Rear Door Weatherstrip
p/n: 82-0141-72
This Rear Door Weatherstrip pair is designed from the original parts for superior fitment and seal. Made of quality sponge rubber with molded corners to ensure a durable positive seal.
Rear Door weatherstrip
p/n: 82-0090-72
Door edge weatherstrip. This part is the primary door to body weatherstrip. Each measures one hundred, twenty five and one quarter inches (125-1/4") long.
Rear Door weatherstrip
p/n: 82-0092-72
Door edge weatherstrip. This part is the primary door to body weatherstrip.
Rear Door Weatherstrips
p/n: 70-4320-72
This Rear Door Weatherstrip pair is designed from the original parts for superior fitment and seal. These primary rear door weatherstrips mount directly on the vehicle body to seal the driver and passenger doors when closed.
Rear Door Weatherstrips
p/n: 82-0109-72
This Rear Door Weatherstrip pair is designed from the original part for superior fitment and seal. These primary door weatherstrips mount (pin-on) directly to the left and right doors sealing the full perimeter of the doors against the vehicle body when the door is closed.
Rear Door Weatherstrips
p/n: 82-0110-72
This Rear Door Weatherstrip pair is designed from the original part for superior fitment and seal. These primary door weatherstrips mount (pin-on) directly to the left and right rear doors sealing the full perimeter of the doors against the vehicle body when the door is closed.
Rear Door Weatherstrips
p/n: 82-0088-72
This Rear Door Weatherstrip pair is the primary door to body weatherstrip. These door weatherstrips mount directly to the left and right rear doors sealing the full perimeter of the doors against the vehicle body when the door is closed.
Rear Gate to Body Weatherstrip
p/n: 70-4318-85
This Rear Gate to Body Weatherstrip is designed from the original part for superior fitment and seal. This weatherstrip mounts on the body to seal the rear gate.
Rear Hatch Door Bumpers
p/n: 70-4730-87
This Rear Hatch Door Bumper pair is a quality reproduction of the original factory part. These adjustable rubber bumpers attach to the rear hatch door to prevent the hatch lid from vibrating.
Rear Hatchback Door Window Glass Weatherstrip
p/n: 70-4826-81
This Rear Hatchback Door Window Glass Weatherstrip is designed from the original part for superior fitment and seal. A reproduction of edge channel that surrounds the metal edge were the rear hatch window glass touches the hatch door.
Rear of Door Run Channel Seals - Convertible & T-Top
p/n: 70-4654-58
This Rear of Door Run Channel Seal pair is designed from the original part for superior fitment, finish and function. This window run channel seal fits at the end of the side window glass run channel. Molded as left and right.
Rear Window Gasket
p/n: 70-2440-81
This Rear Window Gasket is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the back glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation.
Rear Window Gasket
p/n: 70-2437-81
This Rear Window Gasket is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the back glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation.
Rear Window Gasket
p/n: 70-2458-81
This Rear Window Gasket is designed from the original part for superior fitment and seal. The gasket mounts around the full perimeter of the back glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation.
Rear Window Gasket
p/n: 70-2439-81
This Rear Window Gasket is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the back glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation.
Rear Window Gasket
p/n: 70-2706-81
This Rear Window Gasket is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the back glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation.
Rear Window Gasket - King Cab Pickup
p/n: 70-4830-81
This Rear Window Gasket mounts around the full perimeter of the back glass and has properly molded corners for a precise, factory fit. This gasket also has the slot to accommodate the outer edge's decorative reveal molding.
Rear Window Gasket - No Groove
p/n: 20-0825-81
This Rear Window Gasket is designed from the original part for superior fitment and seal. The gasket mounts around the full perimeter of the back glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation.
Rear Window Gasket with Groove
p/n: 20-0972-81
This Rear Window Gasket with Groove mounts around the full perimeter of the back glass and has properly molded corners for a precise, factory fit. It also has the groove or slot to accommodate the outer edge's decorative (chrome) molding.
Rear Window Gasket with Groove
p/n: 70-1926-81
This Rear Window Gasket with Groove set contains the rear window gasket itself and the corner joint sleeves (stainless finish, can be painted black). The gasket mounts around the full perimeter of the back glass and has properly molded corners for a precise, factory fit.
Rear Window Gasket with Sliding Window
p/n: 20-0973-81
This Rear Window Gasket mounts around the full perimeter of the back glass and has vulcanized, or bonded, ends. This gasket is for truck models that have a factory sliding glass rear window. The gasket has a groove for the narrow plastic chrome trim.
Rear Window Gasket without Groove
p/n: 70-4517-83
This Rear Window Gasket mounts around the full perimeter of the back glass. Made from the OEM specifications for an authentic appearance and with properly molded corners for a precise, factory fit. This is a standard black EPDM rubber seal with NO reveal molding groove.
Rear Window Gasket without Groove
p/n: 70-1722-81
This Rear Window Gasket without Groove mounts around the full perimeter of the back glass and has properly molded corners for a precise, factory fit. Fitted gasket provides a formed, seamless seal.
Rear Window Gasket without Groove - Standard Cab
p/n: 70-4521-83
This Rear Windshield Gasket for Standard Cabs mounts around the full perimeter of the rear glass and has properly molded corners for a precise, factory fit. This is a standard black gasket with NO reveal molding groove.
Removable Hardtop Roof Rail Weatherstrip Set
p/n: 70-3956-68
This five (5) piece Removable Hardtop Roof Rail Weatherstrip Set includes the major weatherstrip components needed for your convertible Corvette.
Removable Roof Panel Rear Weatherstrip
p/n: 82-0169-68
This Removable Roof Panel Rear Weatherstrip fits on the standard removable hardtop roof panel and seals at the rear of the roof panel. This part fits on the rear section of the roof panel of the vehicle.
Removable Roof Panel Side Weatherstrips
p/n: 82-0168-68
This Removable Hardtop Roof Panel Side Weatherstrip pair fits on the roof of the vehicle and seals the side windows when the windows are fully raised. Seals are top quality rubber and designed from originals for a like factory fit.
Removable Roof to Quarter Panel Weatherstrips
p/n: 70-4023-68
This Removable Roof To Quarter Panel Weatherstrip pair is designed from the original part for superior fitment and seal. This Left and Right side weatherstrip pair serve to seal between the top of the quarter panel and the removable hardtop roof.
Removable Top Front Weatherstrip - On Fiberglass Roof
p/n: 70-2999-68
This Removable Top Front Weatherstrip is designed from the original part for superior fitment and sealing. This weatherstrip installs directly on the front of the fiberglass roof shell with weatherstrip adhesive glue (not included) and presses against the metal roof cab weatherstrip.
Removable Top Front Weatherstrip - On Metal Cab Roof
p/n: 70-3000-68
This Removable Top Front Weatherstrip is designed from the original part for superior fitment and sealing. This part fits on the rear of the metal cab roof and seals against the removable fiberglass top when the top is placed on the vehicle.
Right (Passenger's Side) Rear Cargo Door Weatherstrip
p/n: 82-0200-72
This Right Rear Cargo Door Weatherstrip is designed from the original part for superior fitment and sealing. This peel-n-stick weatherstrip is for the right (passenger's side) cargo door at the rear of the van.
Side Window Glass Run Channels
p/n: 70-2514-58
This Side Window Glass Run Channel pair is designed from the original part for superior fitment and seal. These two (2) pieces of flexible window run channel are for the sides and top of door windows.
Side Window Glass Run Channels
p/n: 70-3261-58
This Side Window Glass Run Channel pair is designed from the original part for superior fitment and seal. These two (2) pieces of flexible window run channel are for the sides and top of door windows.
Side Window Glass Run Channels - Convertibles and T-Tops
p/n: 70-4653-58
This Side Window Glass Run Channel pair is designed from the original part for superior fitment and seal. These two (2) pieces of flexible window run channel are for the sides and top of door windows. The pair comes with both the left and right run channel for models with Convertibles and T-Tops.
Side window leading edge
p/n: 70-3444-80
Side window vertical leading edge weatherstrip. This part attaches to the vertical edge of the rear side windows when the rear side windows are fully raised. Molded authentic rubber construction with metal core, this part does not include the chrome piece
Side Window Run Channel and Beltline Set
p/n: 70-4677-58
This six (6) piece Side Window Run Channel and Beltline Set includes the Left and Right side run channels and inner / outer window felt beltline weatherstrips for the rear door windows of the vehicle.
Side Window Run Channel and Beltline Set
p/n: 70-2151-58
This six (6) piece Side Window Run Channel and Beltline Set includes the Left and Right side run channels and Inner / Outer window felt beltline weatherstrips for the Front door windows of the vehicle.
Slider Door weatherstrip
p/n: 82-0198-72
Slider door edge weatherstrip. Models with passenger side sliding doors. Proper extrusion for perimeter seal.
Sliding Rear Window Gasket
p/n: 70-4898-83
This Sliding Rear Window Gasket mounts around the full perimeter of the rear sliding glass frame assembly. Gasket provides optimal protection against the elements, ensuring a leak-free and weather-resistant barrier.
Sliding Side Door Weatherstrip
p/n: 70-3256-72
Sliding Door edge weatherstrip. This part is the primary door to body weatherstrip for sliding door. Dual duometer with proper cross section. Push-on type that attaches to the pinch weld.
Splash Apron / A-Arm Dust Shield Filler
p/n: 70-2799-45
This Splash Apron / A-Arm Dust Shield Filler pair is designed from the original part for superior fitment and seal. Filler pair pieces are die cut from quality masticated rubber to authentic original dimensions. Left and Right pieces fit over suspension a-arms and inside front inner fenders.
Splash Apron / A-Arm Dust Shield Fillers
p/n: 70-4927-45
This Splash Apron / A-Arm Dust Shield Filler pair is designed from the original part for superior fitment and function. Filler pieces are die cut from quality 3/32" masticated rubber to authentic original dimensions.
Splash Apron Dust Shield Fillers
p/n: 70-2723-45
This two (2) piece Splash Apron Dust Shield Filler pair is designed from the original part for superior fitment and seal. Filler pieces are die cut from quality masticated rubber to authentic original dimensions. Left and Right pieces install on front inner fender apron to frame.
Stabilizer Bar Bushings
p/n: 70-4678-34
This Stabilizer Bar to Frame Bushing pair may fit either front or rear stabilizer / sway bars depending on the vehicle. Manufactured with quality materials to original specifications.
Stabilizer Bar End Link Repair Set
p/n: 20-0783-33
This five (5) piece Stabilizer Bar End Link Repair Set is for the front or rear stabilizer bar. Two (2) per set. Used on Front for 1975-1979 F150-F350 series 4x2. Used on Rear for 1980-1989 F100-F350 series.