Hood Side Bumper
p/n: 20-0953-42
This Hood Side Bumper is a quality reproduction of the original factory part. This rubber bumper mounts on the front fender to support / cushion the hood closure. Usually requires two (2) bumpers each per vehicle.
Hood to Cowl Weatherstrip
p/n: 70-3541-42
Cowl top panel to hood seal. Sixty-seven and seven eighths' inches (67-7/8") long. Fully molded rubber with fifteen (15) metal clips installed along perimeter of weatherstrip.
Hood To Cowl Weatherstrip
p/n: 82-0215-43
This Hood To Cowl Weatherstrip is designed from the original part for superior fitment and seal. An exact reproduction of the original profile. This weatherstrip installs at the rear of the engine bay to seal between the hood and vehicle body cowl.
Hood to Cowl Weatherstrip
p/n: 70-2722-43
This Hood to Cowl Weatherstrip is designed from the original part for superior fitment and seal. A reproduction using sponge rubber extrusion and pre-installed fastener clips.
Hood to Cowl Weatherstrip
p/n: 70-3448-42
This Hood to Cowl weatherstrip is for superior fitment and sealing. This extruded sponge rubber clinch seal strip mounts at the rear of the engine bay directly to the body on the cowl lip.
Hood to Cowl Weatherstrip
p/n: 70-4280-43
This Hood to Cowl Weatherstrip is designed from the original part for superior fitment and seal. An exact reproduction of the original profile. This seal mounts at the rear of the engine bay to seal between the hood and vehicle body cowl.
Hood to Cowl Weatherstrip
p/n: 70-4135-43
This Hood To Cowl Weatherstrip is designed from the original part for superior fitment and seal. This seal mounts at the rear of the engine bay directly to the body.
Hood to Cowl Weatherstrip
p/n: 70-4326-43
This Hood To Cowl Weatherstrip is designed from the original part for superior fitment and seal. This weatherstrip installs at the rear of the engine bay to seal between the hood and vehicle body cowl.
Hood to Fender Bumper
p/n: 70-2756-42
This Hood to Fender Bumper pair is a quality reproduction of the original factory part. These rubber bumpers attach to the front fender to support / cushion the hood closure.
Hood to Fender Bumper
p/n: 70-3445-42
Bumpers, hood to fender. Set of four (4). Proper cross section with original details approximately five eights (5/8") of an inch wide.
Hood To Fender Bumper Set
p/n: 70-2872-42
These Hood to Fender Bumper are a quality reproduction of the original factory part. The rubber bumper attaches to the front fender to support / cushion the hood closure. Four (4) piece set for two (2) bumpers per side.
Hood to fender weatherstrip
p/n: 70-2728-42
Seal, hood to fender. Mounts on fender at hinge area inside hood opening. Fits around hood hinge assembly to isolate engine compartment from car interior. Replaces factory #E3SZ-16071-B, E3SZ-16072-B.
Hood To Radiator Weatherstrip
p/n: 70-4325-43
This Hood To Radiator Weatherstrip is designed from the original part for superior fitment and seal. An exact reproduction of the original profile. This weatherstrip mounts (push-pin) under the front of the hood and seals against the radiator.
Left (Driver's Side) Rear Cargo Door Weatherstrip
p/n: 82-0199-72
This Left Rear Cargo Door Weatherstrip is designed from the original part for superior fitment and sealing. This peel-n-stick weatherstrip is for the left (driver's side) cargo door at the rear of the van.
Liftgate Frame to Glass Weatherstrip
p/n: 70-4847-81
This Body to Liftgate Weatherstrip is designed from the original part for superior fitment and seal. This weatherstrip mounts on the vehicle's liftgate frame where the glass seals against it.
Liftgate Upper Edge Weatherstrip
p/n: 70-4139-85
This Liftgate Upper Edge Weatherstrip seal is designed from the original part for superior fitment and seal. This weatherstrip mounts on the liftgate and seals the upper edge.
Liftgate Weatherstrip
p/n: 70-4134-84
This Liftgate Weatherstrip seal is designed from the original part for superior fitment and seal. This primary weatherstrip mounts on the vehicle body and seals the liftgate.
Lower Liftgate Weatherstrip
p/n: 70-4324-83
This Lower Liftgate Weatherstrip is designed from the original part for superior fitment and seal. This weatherstrip mounts (push pins) on the liftgate frame and closes against the vehicle body.
Lower U-Jamb Lock Pillar Rear Seals
p/n: 70-3954-79
This Lower U-Jamb Lock Pillar Rear Seals pair, one for each door, is designed from originals and made for a like factory fit.
M6-1.0 Anchor Set - GM Vehicles
p/n: 70-4867-46
A top-quality neoprene rubber Well Nut, Washer and Screw Anchor for GM vehicle models. Well nut has a metric M6-1.0 captive brass nut. Overall length is 21/32". Replaces GM factory number #20130258.
Pickup tie down mounting pad
p/n: 20-0885-45
Pad, pickup box tie down hook. Eight (8) required per truck.
Push-Out Window Weatherstrip
p/n: 70-4751-76
This Push-Out Window Weatherstrip is designed from the original part for superior fitment, appearance and seal. This window weatherstrip fits to the body around the window opening to seal the push out window when closed.