Stabilizer Bar Bushings
p/n: 70-4678-34
This Stabilizer Bar to Frame Bushing pair may fit either front or rear stabilizer / sway bars depending on the vehicle. Manufactured with quality materials to original specifications.
Stabilizer Bar End Link Set
p/n: 60-0221-33
Twenty-two (22) piece Stabilizer Bar End Link set for both sides of one (1) vehicle, fits front or rear bar. Order two (2) sets for vehicles with front and rear stabilizer bars. Hex head bolt 3/8"-16 NF x 6-15/16" long. Comes with metal sleeve, metal cup washers and rubber grommets.
Sunroof - On Body Weatherstrip
p/n: 70-4650-45
This Sunroof - On Body Weatherstrip is designed from the original part for superior fitment and seal. With push-on installation, the weatherstrip fits onto the molding channel that follows the sunroof trim on the body of the car. Seals the interior / exterior to prevent water, debris, and road noise infiltration.
Sunroof - On Glass Weatherstrip
p/n: 70-4649-45
This Sunroof - On Glass Weatherstrip is designed from the original part for superior fitment and seal. With push-on installation this weatherstrips wraps around the entirety of the sunroof glass. Weatherstrip seals the interior / exterior to prevent water, debris, and road noise infiltration.
Tailgate Glass Run Channel
p/n: 70-3001-58
This Tailgate Glass Run Channel presses into the channel in the rear of the shell and the glass then rolls up into the run channel. Made from original specs and from high quality ozone resistant materials to fit your vehicle.
Tailgate To Body Weatherstrip
p/n: 70-4020-45
This Tailgate To Body Weatherstrip is properly molded from originals for a factory like fit and appearance.
Tailgate Weatherstrip
p/n: 70-3016-84
This tailgate weatherstrip is designed from the original part for superior fitment and seal. The seal mounts to the sides and bottom of the tailgate with properly spaced plastic clips. Includes molded ends.
Tailgate Weatherstrip
p/n: 70-2434-72
This Tailgate Weatherstrip reproduction is designed from the original part for superior fitment and seal. This weatherstrip mounts on three (3) sides of the tailgate with weatherstrip adhesive (not included).
Tailgate Window Felt Weatherstrips
p/n: 80-1058-57
This Tailgate Window Felt Weatherstrip reproduction set is designed from the original part for superior fitment and seal. This window felt molding mounts to the tailgate with attached clips. These window felts wipe the tailgate window glass when the glass is lowered.
Top of Door Weatherstrips - Roof Rail
p/n: 70-4022-73
This Top of Door Weatherstrip - Roof Rail pair for the left and right side doors seal the door window frame to the roof hardtop and to the windshield frame.
Trunk - Decklid Bumper
p/n: 70-3528-87
This Trunk-Decklid Bumper is a quality reproduction of the original factory part. This adjustable rubber bumper attaches to the vehicle body to support / cushion the trunk lid closure.
Trunk Bumper
p/n: 70-2741-87
Bumpers, adjustable trunk. Screws into trunk. Two (2) required per car.
Trunk Bumpers - Coupe or Convertible
p/n: 70-4732-87
This Trunk Bumper pair is a quality reproduction of the original factory part. These dense rubber bumpers attach to the vehicle body to support / cushion the trunk lid closure.
Trunk Decklid Weatherstrip
p/n: 70-2743-84
This Trunk Decklike Weatherstrip is designed from the original part for superior fitment and seal. The weatherstrip mounts around the full perimeter of the trunk directly to the body.
Trunk Hinge Gaskets - Convertible
p/n: 70-4657-87
This Trunk Hinge Gasket pair is designed from the original part for superior fitment, finish and function. On Convertibles the gasket pair install between the plastic hinge cover and the trunk lid on the exterior (near the rear window).
Trunk Or Hatchback Weatherstrip
p/n: 82-0038-84
This Trunk Or Hatchback Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk or hatchback opening directly to the body.
Trunk Weatherstrip
p/n: 20-2865-84
This Trunk Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.
Trunk Weatherstrip
p/n: 82-0033-84
This Trunk Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.
Trunk Weatherstrip
p/n: 82-0217-84
This Trunk Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.
Trunk Weatherstrip
p/n: 70-4136-84
This Trunk Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body. Fits both 2-Door and 4-Door models.
Trunk Weatherstrip - 2+2
p/n: 70-4529-85
This Trunk Weatherstrip mounts around the full perimeter of the body by pressing it on to the pinchweld. Reproduction weatherstrip is made from ozone resistant EPDM sponge rubber to OEM specifications for a precise, factory like fit.
Trunk Weatherstrip - Coupe
p/n: 70-4528-85
This Trunk Weatherstrip mounts around the full perimeter of the body by pressing it on to the pinchweld. Reproduction weatherstrip is made from ozone resistant EPDM sponge rubber to OEM specifications for a precise, factory like fit.
T-Top Body Weatherstrip Kit with Plastic Drip Edge
p/n: 90-3381-90
This twelve (12) piece Body Weatherstrip Kit includes the major weatherstrip components needed for the body of your T-Top Chevrolet Camaro or Pontiac Firebird with plastic drip edges. We’ve put everything together in one simple and convenient kit.
T-Top Body Weatherstrip Kit with Rubber Drip Edge
p/n: 90-3599-90
This twelve (12) piece Body Weatherstrip Kit includes the major weatherstrip components needed for the body of your T-Top Chevrolet Camaro or Pontiac Firebird with plastic drip edges. We’ve put everything together in one simple and convenient kit.
T-Top Drip Edge Flap Seals - Plastic
p/n: 70-4331-68
This T-Top Outer Drip Edge Flap Seal pair is designed from the original part for superior fitment and seal. These plastic "flap seal" pieces install on the T-Top itself. Replacing these will aid in reducing wind noise and keep rain out of your T-Top roofed F-body.
T-Top Drip Edge Flap Seals - Rubber
p/n: 70-4707-68
This T-Top Outer Drip Edge Flap Seal pair is designed from the original part for superior fitment and seal. These rubber "flap seal" pieces install on the T-Top itself. Replacing these will aid in reducing wind noise and keep rain out of your T-Top roofed F-body.
T-Top Main Weatherstrips - Coupe
p/n: 70-4526-68
This T-Top Main Weatherstrip pair mounts around the three (3) sides of the T-Top with properly molded corners and ends. Designed from the original part for a positive fitment and seal.
T-Top Side Rail Weatherstrip Metal Retainer Channels
p/n: 70-4708-68
This T-Top Side Rail Weatherstrip Metal Retainer Channel pair is designed from the original part for superior fitment and functon. These channels mount to the removable T-Top panels. The channels hold the side rail rubber weatherstrip to the T-Top glass panel.
T-Top Side Rail Weatherstrips
p/n: 82-0186-68
This T-Top Side Rail Weatherstrip pair is designed from the original part for superior fitment and seal. This part fits on the roof of the vehicle and seals the side window when the window is fully raised.
T-Top Side Weatherstrips - 2+2
p/n: 70-4527-68
This T-Top Side Weatherstrip pair mounts on the removable roof inserts of the vehicle to seal each side window when the window is fully raised. for Fully molded with accurate fitting ends and smooth skin sponge rubber construction.
T-Top Side Weatherstrips - Coupe
p/n: 70-4525-68
This T-Top Side Weatherstrip pair mounts on the removable roof inserts of the vehicle to seal each side window when the window is fully raised. Fully molded with accurate fitting ends and smooth skin sponge rubber construction.
T-Top To Body Weatherstrips
p/n: 83-1000-68
This T-Top To Body Weatherstrip pair installs up the A pillar, into the T-Top opening and back down the C Pillar. Fits models with factory T-top option.
T-Top To Body Weatherstrips - 2+2
p/n: 70-4821-68
This T-Top To Body Weatherstrip pair is designed from the original part for superior fitment and seal. This is the primary T-Top weatherstrip that encircles three sides of the T-Top, specifically designed to fit the 2+2 model.
T-Top Weatherstrip Set - 2+2
p/n: 90-3673-90
This T-Top Weatherstrip Set is designed from the original part for superior fitment and seal. Parts are manufactured from top quality rubber to ensure durability and a proper seal.
T-Top Weatherstrip Set - Coupe
p/n: 90-3674-90
This T-Top Weatherstrip Set is designed from the original part for superior fitment and seal. Parts are manufactured from top quality rubber to ensure durability and a proper seal.
T-Top Weatherstrip Set with Plastic Drip Edge
p/n: 90-3597-90
This T-Top Weatherstrip Set is designed from the original part for superior fitment and seal. This eight (8) piece weatherstrip set is for Camaro or Firebird models with Plastic Drip Edges.
T-Top Weatherstrip Set with Rubber Drip Edge
p/n: 90-3598-90
This T-Top Weatherstrip Set is designed from the original part for superior fitment and seal. This eight (8) piece set is for Camaro or Firebird models with Rubber Drip Edges.
Upper Door Weatherstrip - Left or Right
p/n: 70-4883-73
This Upper Door Weatherstrip is made from high-quality ozone-resistant PVC rubber. This single piece weatherstrip is installed by pressing it onto the upper part of the cab opening for 2-Door Standard and Extended Cab Pickup Trucks.
Upper U-Jamb Lock Pillar Seals
p/n: 70-3953-79
This pair of Upper U-Jamb Lock Pillar Seals, one for each door, is designed from originals and made for a like factory fit.
Vent Window Division Post Weatherstrips
p/n: 70-4647-56
This Front Vent Window Division Post Weatherstrip pair is designed from the original part for superior fitment and seal. This piece mounts on the vertical division bar with rivets and the vent glass closes against it.
Vent Window Pivot Post Rivet
p/n: 70-4757-98
This Vent Window Pivot Post Rivet is used to replace the hinge pivot rivet for both left and right vent window assemblies. Commonly used for General Motors car and truck models.
Vent Window Rebuild Set
p/n: 70-4801-70
This Vent Window Rebuild Set includes glass setting tape (1/16 thick), hinge pivot step rivet pair, and a rivet peening punch. The set has enough materials for both the passenger side and driver side vent window assemblies.
Vent Window Rivets and Setting Tool
p/n: 70-4789-70
This Vent Window Rivet pair and Setting Tool includes the peening punch and step rivets to replace the hinge pivot rivet for both left and right vent window assemblies.
Vent Window Weatherstrip Set
p/n: 90-3607-90
This four (4) piece Front Door Vent Window Weatherstrip set contains the main vent window seals and division post seal. All of the pieces were designed from original parts for a precise and like factory correct fit.
Vent Window Weatherstrips
p/n: 70-4747-55
This Front Door Vent Window Weatherstrip pair is designed from the original parts for superior fitment and seal. A two (2) piece pair that fits both driver (Left) and passenger (Right) front doors of the vent / wing window assemblies.
Vent Window Weatherstrips
p/n: 70-4646-55
This Front Door Vent Window Weatherstrip pair is designed from the original parts for superior fitment and seal. A two (2) piece pair that fits both driver (Left) and passenger (Right) front doors of the vent / wing window assemblies.
Window Felt and Run Channel Set
p/n: 70-2363-58
This six (6) piece Window Felt and Run Channel Set includes the window felt beltline weatherstrips and flex run channels needed for the side window glass. This Original style materials set does two (2) front doors.
Window Felt and Run Channel Set
p/n: 80-0936-57
This high-quality material Window Felt and Run Channel Weatherstrip set includes the window felt rubber weatherstrips that wipe the side windows when the glass is lowered as well as the glass run channel that holds the glass in place. Complete set does both front doors.
Window Felt and Run Channel Set
p/n: 70-2589-58
This six (6) piece Window Felt and Run Channel Set includes the window felt beltline weatherstrip and run channels needed for the side window glass. The set does two (2) front doors.
Window Felt and Run Channel Set
p/n: 80-0937-57
This high-quality six (6) piece Window Felt and Run Channel set is made to original specifications to correctly fit your vehicle. This set includes the window felt beltline moldings (with the pre-applied clips) and glass run channels for both the driver and passenger front doors.