Front Inner Fender to Hood Weatherstrip
p/n: 82-0159-45
A Front Inner Fender To Hood Weatherstrip made with the proper cross section of rubber like the original for durability and a like factory seal. Fits over the inner fender panel and seals to hood assembly. Sold individually, two (2) per vehicle required.
Front or Rear Door seals
p/n: 82-0152-72
Door edge weatherstrip. Push-on type used for the front or rear doors. Puchase two (2) sets if needing all four (4) door seals for front and rear.
Front or Rear Door Weatherstrips
p/n: 82-0150-72
This is a universal push-on type Door Weatherstrip. Made with flexible steel core. Can be used for the front or rear entry doors. Purchase two (2) sets if needing all four (4) entry door seals for front and rear.
Front or Rear Door Weatherstrips
p/n: 70-3012-72
This Front or Rear Door Weatherstrip pair is designed from the original part for superior fitment and seal. Push-on clinch type door weatherstrips mount directly to the body to seal against the full perimeter of the doors.
Front or Rear Door Weatherstrips
p/n: 70-2513-72
This Door Weatherstrip pair is designed from the original parts for superior fitment and seal. These door weatherstrips mount directly to the body to seal against the full perimeter of both the front (left / right) or rear (left / right) doors. This is the primary door to body weatherstrip.
Fuel Filler Neck to Trunk Floor Seal
p/n: 70-4334-39
This Fuel Filler Neck to Trunk Floor Seal is designed from the original part for superior fitment and seal. This piece encircles the fuel filler neck to seal between the neck and vehicles trunk floor.
Glass Run Channel - Left Hand
p/n: 70-4515-58
This Glass Run Channel presses into the door channel where the door glass rolls up into. Reproduction weatherstrip is made to OEM specifications for a precise, factory like fit.
Glass Run Channel - Right Hand
p/n: 70-4516-58
This Glass Run Channel presses into the door channel where the door glass rolls up into. Reproduction weatherstrip is made to OEM specifications for a precise, factory like fit.
GM Window Guide Assortment Set
p/n: 70-4729-62
A thirty (30) piece General Motors Window Guide Assortment Set with popular size coverage in a convenient and economic package. Assortment comes in convenient, translucent, durable polypropylene box.
Hatchback Weatherstrip
p/n: 82-0173-84
This Hatchback Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the hatch opening directly to the body.
Hood and Fender Bumper
p/n: 70-3446-42
This Hood / Fender Bumper is a quality reproduction of the original factory part. This adjustable rubber bumper attaches to the front fender to support / cushion the hood closure.
Hood Bumper
p/n: 70-2735-42
This adjustable Hood Bumper mounts at the front of the vehicle over the radiator. 1.0 x 44mm thread with 23mm hex head.
Hood To Cowl Weatherstrip
p/n: 70-4897-43
This Hood To Cowl Weatherstrip is designed from the original part for superior fitment and seal. An exact reproduction of the original profile. This weatherstrip installs at the rear of the engine bay to seal between the hood and vehicle body cowl.
Hood to Cowl Weatherstrip
p/n: 70-2732-43
This Hood to Cowl Weatherstrip mounts to firewall. A reproduction sponge rubber extrusion with correct molded ends for an authentic look and performance.
Hood to Cowl Weatherstrip
p/n: 70-4533-43
This Hood To Cowl Weatherstrip is designed from the original part for superior fitment and seal. This weatherstrip mounts at the rear of the engine bay to seal between the hood and vehicle body cowl.
Hood to Cowl Weatherstrip
p/n: 70-3448-42
This Hood to Cowl weatherstrip is for superior fitment and sealing. This extruded sponge rubber clinch seal strip mounts at the rear of the engine bay directly to the body on the cowl lip.
Hood To Fender Bumpers
p/n: 70-4733-42
This Hood To Fender Bumper pair is a quality reproduction of the original factory part. These rubber bumpers attach to the front fenders to support / cushion the hood closure.
Hood To Radiator Weatherstrip
p/n: 70-4524-43
This Hood To Radiator Weatherstrip attaches to the hood and seals against the radiator. Reproduction weatherstrip is made from ozone resistant EPDM rubber to OEM specifications for a precise, factory like fit.
Hood To Radiator Weatherstrip
p/n: 70-2740-42
Air deflector, hood to radiator support. Attaches to the bottom of the hood.
Liftgate Weatherstrip
p/n: 70-4122-85
This Liftgate Weatherstrip seal is designed from the original part for superior fitment and seal. The push-on style weatherstrip mounts on the upper portion of the body on liftgate models.
Lower U-Jamb Lock Pillar Rear Seals
p/n: 70-3954-79
This Lower U-Jamb Lock Pillar Rear Seals pair, one for each door, is designed from originals and made for a like factory fit.
M6-1.0 Anchor Set - GM Vehicles
p/n: 70-4867-46
A top-quality neoprene rubber Well Nut, Washer and Screw Anchor for GM vehicle models. Well nut has a metric M6-1.0 captive brass nut. Overall length is 21/32". Replaces GM factory number #20130258.
Parking Brake Cable To Floor Pan Boot
p/n: 70-4197-24
This Parking Brake Cable To Floor Pan Boot seal is designed from the original part for superior fitment and seal. This boot seal mounts by securely locking into the vehicle floor pan perfectly for the parking brake cable to pass through.
Push-Out Window Weatherstrip
p/n: 70-4751-76
This Push-Out Window Weatherstrip is designed from the original part for superior fitment, appearance and seal. This window weatherstrip fits to the body around the window opening to seal the push out window when closed.
Quarter Window Beltline Retainer Set
p/n: 70-4193-62
This Quarter Window Beltline Retainer hardware set is designed from the original part for a like original fitment.
Quarter Window Weatherstrip Without Trim Groove
p/n: 70-4024-77
This Quarter Window Weatherstrip Without Trim Groove, left and right gasket, fits the quarter window of the Bronco hardtop.
Rear Cargo Door Hinge Gaskets Set
p/n: 60-0659-69
This four (4) piece molded Rear Cargo Door Hinge Gasket Set is made to original specifications for proper fitment. Seals are fully molded from top quality rubber to ensure durability, fitment and proper seal.
Rear Cargo Door Upper Drip Rail
p/n: 70-4180-85
This Rear Cargo Door Upper Drip Rail is a reproduction designed for superior fitment and seal. This weatherstrip mounts on the upper portion of the body above the rear opening cargo doors.
Rear Cargo Door Upper Weatherstrip
p/n: 70-4703-73
This Rear Cargo Door Upper Weatherstrip is designed from the original part for superior fitment and seal. Push-on type door weatherstrip mounts on the upper portion of the body and seals against the closed cargo doors.
Rear Cargo Door Weatherstrip Set
p/n: 90-0154-72
This three (3) piece Rear Cargo Door Set includes the major weatherstrip components needed for the two (2) rear doors of your vehicle project. These parts are reproductions designed from originals with fully molded corners and corrosion resistant brass end pieces for superior performance and a factory fit.
Rear Cargo Door Weatherstrips
p/n: 70-4162-72
This two (2) piece Rear Cargo Door Weatherstrip set is for the Rear Cargo (Barn) Doors. It is designed from the original parts for superior fitment and seal. These weatherstrips mount directly to the doors sealing the two together when closed.
Rear Cargo Doors or Tailgate Weatherstrip
p/n: 70-4292-85
This Rear Cargo Doors or Tailgate Weatherstrip reproduction is designed from the original part for superior fitment and seal. This seal is a press-on style weatherstrip that mounts on the body to seal to the cargo doors or tailgate - liftgate against the body.
Rear Door weatherstrip
p/n: 70-3253-72
Door edge weatherstrip. This part is the primary door to body weatherstrip.
Rear Door Weatherstrips
p/n: 70-2218-72
This Rear Door Weatherstrip pair is designed from the original parts for superior fitment and seal. Push-on type door seals mount directly to the body to seal against the full perimeter of the rear doors.
Rear Dutch (Half) Door Weatherstrip Kit
p/n: 90-0155-85
This Rear Dutch (Half) Door Weatherstrip Kit includes the major components needed for the rear window / doors of your repair project. These parts are reproductions designed from originals with fully molded corners and corrosion resistant brass end pieces.
Rear Dutch (Half) Door Weatherstrip Set
p/n: 70-4087-85
This weatherstrip set is for the Rear Dutch (Half) Doors. It is designed from the original parts for superior fitment and seal. These weatherstrips mount directly to the doors sealing the two together when closed.
Rear Dutch Door Upper Drip Rail
p/n: 70-4085-85
This Rear Dutch Door Upper Drip Rail is a reproduction designed for superior fitment and seal. This weatherstrip mounts on the upper portion of the body above the rear window opening hatch.
Rear Liftgate Window Weatherstrip Set
p/n: 70-4083-85
This Rear Liftgate Window Weatherstrip Set reproduction is designed from the original part for superior fitment and seal. This three (3) piece set works to provide a tight seal between the closed rear window liftgate and the body of the vehicle.
Rear Window Gasket
p/n: 70-2456-81
This Rear Window Gasket mounts around the full perimeter of the back glass and has properly molded corners for a precise, factory fit. Fitted gasket provides a formed, seamless seal.
Rear Window Gasket
p/n: 70-2439-81
This Rear Window Gasket is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the back glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation.
Rear Window Gasket - No Groove
p/n: 70-2448-81
This Rear Window Gasket mounts around the full perimeter of the back glass and has properly molded corners for a precise, factory fit. For vehicles without a perimeter decorative reveal molding.
Rear Window Gasket - No Groove
p/n: 20-0825-81
This Rear Window Gasket is designed from the original part for superior fitment and seal. The gasket mounts around the full perimeter of the back glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation.
Rear Window Gasket with Groove
p/n: 20-0972-81
This Rear Window Gasket with Groove mounts around the full perimeter of the back glass and has properly molded corners for a precise, factory fit. It also has the groove or slot to accommodate the outer edge's decorative (chrome) molding.
Rear Window Gasket with Sliding Window
p/n: 20-0973-81
This Rear Window Gasket mounts around the full perimeter of the back glass and has vulcanized, or bonded, ends. This gasket is for truck models that have a sliding glass rear window. The gasket has a groove for the narrow plastic chrome trim.