Window Felt Outer Beltline Weatherstrips
p/n: 80-1111-57
This is a high-quality material style Window Felt Outer Beltline Weatherstrip pair. This ready to install two (2) piece beltline pair includes Only the Outer window felts (the part sealing the outside of the vehicle) for the front door side windows.
Stabilizer Bar End Link Set
p/n: 60-0221-33
Twenty-two (22) piece Stabilizer Bar End Link set for both sides of one (1) vehicle, fits front or rear bar. Order two (2) sets for vehicles with front and rear stabilizer bars. Hex head bolt 3/8"-16 NF x 6-15/16" long. Comes with metal sleeve, metal cup washers and rubber grommets.
Front Inner Fender to Hood Weatherstrip
p/n: 82-0159-45
A Front Inner Fender To Hood Weatherstrip made with the proper cross section of rubber like the original for durability and a like factory seal. Fits over the inner fender panel and seals to hood assembly. Sold individually, two (2) per vehicle required.
Removable Top Front Weatherstrip - On Fiberglass Roof
p/n: 70-2999-68
This Removable Top Front Weatherstrip is designed from the original part for superior fitment and sealing. This weatherstrip installs directly on the front of the fiberglass roof shell with weatherstrip adhesive glue (not included) and presses against the metal roof cab weatherstrip.
Cobra Clutch And Brake Pedal Pads
p/n: 70-4202-22
This reproduction Cobra Clutch And Pedal Pad pair mounts around the full perimeter of the brake and clutch pedals for a precise, factory fit. Replaces original pedal pads. Manufactured with a thick, quality rubber construction and an embossed striking Cobra emblem on each pad.
Trunk Weatherstrip
p/n: 70-4196-84
This Trunk Weatherstrip is designed from the original part for superior fitment and seal. This fully bonded seal mounts around the full perimeter of the trunk directly to the body.
Firewall to Hood Seal
p/n: 70-4275-43
This Firewall to Hood Seal weatherstrip is designed from the original part for superior fitment and seal. Seal installs on the top edge of the firewall where the hood meets the cowl. Push-on to body mounting with no adhesive required.
Trunk Spring Bumpers
p/n: 70-4736-87
This Trunk Spring Bumper pair is a quality reproduction of the original factory part. These trunk springs feature high-quality metal construction and a durable rubber bumper that helps to eliminate metal to metal contact.
Door Weatherstrip - Left or Right
p/n: 70-4887-73
This Door Weatherstrip is designed from the original part for superior fitment and seal. This peel-n-stick weatherstrip easily installs on the Door and fits either the driver or passenger doors.
Rear Cargo Door Upper Weatherstrip
p/n: 70-4703-73
This Rear Cargo Door Upper Weatherstrip is designed from the original part for superior fitment and seal. Push-on type door weatherstrip mounts on the upper portion of the body and seals against the closed cargo doors.
Removable Top Front Weatherstrip - On Metal Cab Roof
p/n: 70-3000-68
This Removable Top Front Weatherstrip is designed from the original part for superior fitment and sealing. This part fits on the rear of the metal cab roof and seals against the removable fiberglass top when the top is placed on the vehicle.
Engine Top Cover Weatherstrip
p/n: 70-4750-88
This Engine Top Cover Gasket is an original design reproduction made from top quality sponge rubber. This gasket attaches between the removable engine cover ("doghouse") and the vehicle firewall / floorboard.
Top of Door Weatherstrips - Roof Rail
p/n: 70-4022-73
This Top of Door Weatherstrip - Roof Rail pair for the left and right side doors seal the door window frame to the roof hardtop and to the windshield frame.
Hood to Cowl Weatherstrip
p/n: 70-3448-42
This Hood to Cowl weatherstrip is for superior fitment and sealing. This extruded sponge rubber clinch seal strip mounts at the rear of the engine bay directly to the body on the cowl lip.
Hood to Cowl Weatherstrip
p/n: 70-4533-43
This Hood To Cowl Weatherstrip is designed from the original part for superior fitment and seal. This weatherstrip mounts at the rear of the engine bay to seal between the hood and vehicle body cowl.
Upper Door Weatherstrip - Left or Right
p/n: 70-4880-73
This Upper Door Weatherstrip is made from high-quality ozone-resistant PVC rubber. This single piece weatherstrip is installed onto the A-pillar, spanning along the upper section of the cab opening and extending down the rear side door of the 4-door trucks.
Push-Out Window Weatherstrip
p/n: 70-4751-76
This Push-Out Window Weatherstrip is designed from the original part for superior fitment, appearance and seal. This window weatherstrip fits to the body around the window opening to seal the push out window when closed.
Liftgate Weatherstrip
p/n: 70-4122-85
This Liftgate Weatherstrip seal is designed from the original part for superior fitment and seal. The push-on style weatherstrip mounts on the upper portion of the body on liftgate models.
Glass Run Channel - Left Hand
p/n: 70-4515-58
This Glass Run Channel presses into the door channel where the door glass rolls up into. Reproduction weatherstrip is made to OEM specifications for a precise, factory like fit.
Glass Run Channel - Right Hand
p/n: 70-4516-58
This Glass Run Channel presses into the door channel where the door glass rolls up into. Reproduction weatherstrip is made to OEM specifications for a precise, factory like fit.
Hood To Radiator Weatherstrip
p/n: 70-4524-43
This Hood To Radiator Weatherstrip attaches to the hood and seals against the radiator. Reproduction weatherstrip is made from ozone resistant EPDM rubber to OEM specifications for a precise, factory like fit.
Window Felt Beltline Weatherstrips
p/n: 80-1024-57
This four (4) piece inner and outer Window Felt Beltline Weatherstrip set is for both driver and passenger front doors. These beltline moldings mount on the top inner and outer part of the door to wipe the side windows when the glass is lowered.
Convertible B-Pillar End Cap Fillers
p/n: 70-4192-63
This Convertible B-Pillar End Cap Filler pair is designed from the original part for superior fitment and sealing. This rubber filler pair attaches to the body B-Pillars to seal between that quarter post and the door when closed.
Window Felt Beltline Weatherstrips
p/n: 80-1023-57
This four (4) piece inner and outer Window Felt Beltline Weatherstrip set is for both driver and passenger rear doors. These beltline moldings mount on the top inner and outer part of the door to wipe the side windows when the glass is lowered.