Detachable Center Post Pad
p/n: 70-0280-88
Pads, folding front seat rest, brass core. Also used as bumper, slat iron to compartment on convertibles.
Steering Column Floorplate
p/n: 50-0249-24
This Steering Column Floorplate mounting pad is designed from the original part for an authentic fit, finish and appearance. Can also be used on other models with same floorplate with slight alteration.
Dashboard Anti-Rattle
p/n: 30-0025-20
Anti rattle, each end of instrument panel. Beaded edge as original, eight and one half (8-1/2) inch long. Replaces 310708 & 310709.
Heel plate
p/n: 70-3608-88
Heel plate to protect driver's side floor carpet. Identical to original. Only for models with carpet.
Steering Column Bracket Insulator
p/n: 70-1512-36
This Steering Column Bracket Insulator pair is designed from the original part for an authentic fit, finish, and appearance. Two (2) pieces of extruded rubber like original.
Steering Column Grommet - Brown
p/n: 60-0256-36
This brown rubber Steering Column to Floor Grommet is designed from the original part for superior fitment and sealing. This part fits around the steering column to seal the column through the body floor pan. Brass core as original.
Steering Column Grommet
p/n: 70-1509-88
This Steering Column To Floor Grommet is designed from the original part for superior fitment and sealing. This grommet is fully molded from quality dense rubber to authentic original dimensions. This part fits around the steering column to seal the column through the body floor pan.
Steering Column Floorplate
p/n: 70-1425-88
This black rubber Steering Column Floorplate is designed from the original part for an authentic fit, finish and appearance. Fits to the steering column to firewall body opening.
Steering Column Grommet
p/n: 70-1894-36
This Steering Column To Floor Grommet is designed from the original part for superior fitment and sealing. This grommet is fully molded from quality dense rubber to authentic original dimensions. This part fits around the steering column to seal the column through the body floor pan.
Steering Column To Dash Clamp Insulator
p/n: 15-0002-36
This Steering Column To Dash Clamp Insulator is designed from the original part for an authentic fit, finish, and appearance.
Ulta-Mat Headliner Heat and Sound Underlayment
p/n: 70-4783-88
This Ulta-Mat Headliner Heat and Sound Underlayment pair is pre-cut for a direct-fit installation. Underlayment pieces are made from a flexible and lightweight foil facing foam rubber sound and heat insulation material.
Steering Column Floorplate Retainer - Brown
p/n: 50-0260-89
This brown rubber Steering Column Floorplate Retainer is designed from the original part for an authentic fit, finish and appearance. The retainer fits to the front floor mat on steering column. Part is also called a steering column floorplate.
Steering Column Grommet - Brown
p/n: 40-0144-89
This molded Steering Column to Toe Board Grommet is designed from the original part for superior fitment and function. This brown rubber part seals around the steering column at the toe board on the interior side.
Carpet Heel Plate
p/n: 40-0087-88
Heel pad for carpet. Identical to original. Five and three fourths (5-3/4) inch by ten and one half (10-1/2) inch, to be stitched in place.Length: 10.
Steering Column Grommet
p/n: 70-2316-88
This Steering Column To Floor Grommet is designed from the original part for superior fitment and sealing. This grommet is fully molded from quality dense rubber to authentic original dimensions. This part fits around the steering column to seal the column through the body floor pan.
Steering Column Floorplate
p/n: 60-0395-36
This black rubber Steering Column Floorplate is designed from the original part for an authentic fit, finish and appearance.
Carpet Heel Plate
p/n: 70-0604-88
Heel mat, front carpet, driver's position.Length: 15.75 inches. Width: 6.25 inches.
Steering Column Floorplate
p/n: 17-0001-36
This Steering Column Floorplate is designed from the original part for an authentic fit, finish and appearance. An excellent copy of the original in black rubber only.
Steering Column Grommet
p/n: 70-0682-88
This Steering Column Grommet is designed from the original part for superior fitment and function. The grommet fits the steering column at toe board over carpet.
Gearshift Boot
p/n: 18-0017-88
Boot only, gearshift at floor, to replace boot section at original gearshift floorplate.Width: 4.50 inches.
Gearshift Boot
p/n: 20-2877-88
This gearshift boot is for 3-speed manual transmission lower shifter. Exact reproduction of original. Surrounds shifter housing sealing out dirt, moisture and noise.
Steering Column Grommet
p/n: 70-0007-36
This Steering Column at Floor Grommet is designed from the original part for superior fitment and sealing. Part is molded from quality EPDM rubber to authentic original dimensions. This part fits around the steering column to seal the column at the body floor pan.
Steering Column Anti-Squeak Finish Strip
p/n: 70-0719-88
This Steering Column Anti-Squeak Finish Strip fits between the steering column housing and dash. Works as a noise reducer and to provide a finished appearance.
Carpet Heel Plate
p/n: 70-3019-88
Heel pad for carpet. Seven and three eighths (7-3/8) inch wide by sixteen (16) inches long.
Steering Column and Shifter Grommet
p/n: 12-0012-36
This Steering Column and Shifter Grommet installs at the floor toe board. A reproduction with all original details.
Steering Column Grommet
p/n: 70-1801-88
This Steering Column Grommet is designed from the original part for superior fitment and fundtion. Part is molded from quality EPDM rubber to authentic original dimensions.
Steering Column Grommet
p/n: 40-0421-36
This Steering Column to Toe Board Grommet is designed from the original part for superior fitment and sealing. This part fits around the steering column and transmission shift rod to seal the column through the body floor pan.
Steering Column Grommet - Brown
p/n: 50-0504-89
This molded Steering Column to Floorboard Grommet is designed from the original part for superior fitment and function. This brown rubber part seals around the steering column at the floorboard on the interior side.
Choke and Throttle Grommet
p/n: 20-2280-88
This Choke and Throttle Grommet pair is the original style grommet. The grommets are a molded rubber encased in a metal sleeve. The pair includes the mounting clips.
Steering Column Grommet
p/n: 60-0015-36
This black rubber Steering Column to Floor Grommet is designed from the original part for superior fitment and sealing. This part fits around the steering column to seal the column through the body floor pan. Brass core as original.
Quarter Window Filler
p/n: 20-3085-62
Seal assembly. Installs on body below rear quarter glass to body weatherstrip.
Convertible Rear Storage Compartment - Decklid Weatherstrip
p/n: 70-4138-88
This Convertible Rear Storage Compartment - Decklid Weatherstrip is designed from the original part for superior fitment and seal. The rubber weatherstrip mounts around the full perimeter of the convertible top compartment lid to restore the seal.
Heat and Sound Underlayment
p/n: 70-4676-88
This single piece die-cut Heat and Sound Underlayment for floors lays under the carpeting's felt mat. This underlayment will decrease road noise and decrease heat inside the trucks interior compartment. Pre-cut and ready to be installed into your vehicle to improve driving comfort.
Steering Column Grommet - Brown
p/n: 40-0078-89
This molded Steering Column to Toe Board Grommet is designed from the original part for superior fitment and function. This brown rubber part seals around the steering column at the toe board on the interior side.
Gearshift Boot
p/n: 70-4817-26
This Gearshift Boot is designed from the original part for superior fitment and function. This boot fits over the gearshift tower to make a weathertight connection for the transmission gearshift rod as it passes up through the vehicle floorboard.
Folding Seat Bumper
p/n: 70-2576-88
Bumper, front seat back center arm hinge. Excellent finish and details with original style metal core. Both seat back inner corners rest on this single bumper.
Steering Column Grommet - Black
p/n: 50-0504-36
This molded Steering Column to Floorboard Grommet is designed from the original part for superior fitment and function. This black rubber part seals around the steering column at the floorboard on the interior side.
Heater Air Inlet Hose Connector
p/n: 70-4739-88
This black rubber accordion style flexible Heater Air Inlet Hose Connector is designed from the original part for superior fitment and seal. This part works to seal the passenger side of the cowl to direct fresh air to the heater box.
Brown Gearshift Boot
p/n: 40-0111-89
Boot, base of gearshift lever. Brown rubber. For black see our #40-0111-88. Made separately to fit most of our gearshift floorplates. Copied from original.
Roof Headliner Retainer Strip
p/n: 60-0368-88
This Roof Headliner Retainer Strip is designed from the original part for an authentic fit, finish, and appearance. The retainer strip is used to hold the interior cardboard headliner in place.
Gearshift Boot
p/n: 20-2878-88
This Gearshift Boot is for 4-speed manual transmission lower shifter. Exact reproduction of original. Surrounds shifter housing sealing out dirt, moisture and noise.
Steering Column Grommet
p/n: 40-0007-36
This Steering Column to Toe Board Grommet is designed from the original part for superior fitment and sealing. This part fits around the steering column to seal the column through the body floor pan. For one and one half (1-1/2) inch steering column tube.
Steering Column Grommet - Black
p/n: 40-0144-36
This molded Steering Column to Toe Board Grommet is designed from the original part for superior fitment and function. This black rubber part seals around the steering column at the toe board on the interior side.
Brown seat back rest pad
p/n: 70-0482-89
Rest pads, seat back, outer, on two (2) door styles with folding seats. Brown rubber. For black see our #70-0482-88. Self retaining, perfect copy.
Steering Column Grommet - Brown
p/n: 60-0621-89
This brown rubber Steering Column To Toe Board Grommet is designed from the original part for superior fitment and sealing. Part is molded from quality rubber to authentic original dimensions.
Clutch, Brake and Gas Pedal Set
p/n: 90-3821-90
With top quality workmanship and materials, this reproduction Clutch, Brake and Gas Pedal Set is designed from the original part for an authentic fit, finish and appearance.
Gearshift Boot
p/n: 40-0076-88
Dust boot, gearshift, beehive type. Excellent copy and material. Used on some shift ball sockets.Length: 4.75 inches.
Steering Column Floorplate Retainer - Black
p/n: 50-0260-36
This black rubber Steering Column Floorplate Retainer is designed from the original part for an authentic fit, finish and appearance. The retainer fits to the front floor mat on steering column. Part is also called a steering column floorplate.
Steering Column Grommet - Black
p/n: 40-0078-36
This molded Steering Column to Toe Board Grommet is designed from the original part for superior fitment and function. This black rubber part seals around the steering column at the toe board on the interior side.
Steering Column Grommet - Black
p/n: 60-0621-36
This black rubber Steering Column To Toe Board Grommet is designed from the original part for superior fitment and sealing. Part is molded from quality rubber to authentic original dimensions.
Steering Column Grommet
p/n: 70-0349-88
This Steering Column at Floorboard Grommet is designed from the original part for superior fitment and sealing. Part is molded from quality EPDM rubber to authentic original dimensions. This part fits around the steering column to seal the column at the body floorboard.
Ulta-Mat Package Tray Heat and Sound Insulator Underlayment
p/n: 70-4780-88
This Ulta-Mat Package Tray Heat and Sound Insulator Underlayment is pre-cut for a direct-fit installation. Underlayment pieces are made from a flexible and lightweight foil facing foam rubber sound and heat insulation material.
Brake and Clutch Shank Seal
p/n: 40-0217-24
Draft cap for brake and clutch pedal.Length: 2.4375 inches. Width: 1.6875 inches.
Gearshift Boot
p/n: 40-0111-88
Boot, base of gearshift lever. Black rubber. For brown see our #40-0111-89. Made separately to fit most of our gearshift floorplates. Copied from original.
Folding seat bumper
p/n: 70-0482-88
Rest pads, seat back, outer, on two (2) door styles with folding seats. Black rubber. For brown see our #70-0482-89. Self retaining, perfect copy.
Steering Column Grommet
p/n: 70-0450-88
This Steering Column at Floor Grommet is designed from the original part for superior fitment and sealing. Part is molded from quality EPDM rubber to authentic original dimensions. Fits to chrome ring.
Steering Column Grommet
p/n: 30-0106-36
This Steering Column to Toe Board Grommet is designed from the original part for superior fitment and sealing. This part fits around the steering column to seal the column through the body floor pan.
Steering Column Grommet
p/n: 60-0341-32
This Steering Column at Floor Grommet is designed from the original part for superior fitment and sealing. Part is molded from quality EPDM rubber to authentic original dimensions. This part fits around the steering column to seal the column at the body floor pan.
Steering Column Grommet - Brown
p/n: 27-0047-89
This molded Steering Column to Toe Board Grommet is designed from the original part for superior fitment and function. This brown rubber part seals around the steering column at the toe board on the interior side.
Heat and Sound Underlayment Set
p/n: 70-4671-88
This four (4) piece die-cut Heat and Sound Underlayment Set lays under the carpet. This insulator underlayment will decrease road noise and decrease heat inside the interior compartment. Pre-cut and ready to be installed into your vehicle to improve driving comfort.
Heat and Sound Underlayment Set
p/n: 70-4672-88
This four (4) piece die-cut Heat and Sound Underlayment Set lays under the carpet. This underlayment will decrease road noise and decrease heat inside the interior compartment. Pre-cut and ready to be installed into your vehicle to improve driving comfort.
Steering Column To Floor Seal
p/n: 70-0340-88
This Steering Column To Floor Seal is designed from the original part for superior fitment and sealing. The seal is precision die-cut from quality sponge rubber to authentic original dimensions.
Floor Board Seals
p/n: 20-1595-88
This Floor Board Seal set contains all of the correct sealing components for the front floor boards.
Steering Column Grommet - Brown
p/n: 60-0102-89
This molded Steering Column at Floorboard Grommet is designed from the original part for superior fitment and function. This brown rubber part seals around the steering column at the floorboard on the interior side. For column shift models.
Steering Column Grommet
p/n: 40-0237-36
This Steering Column Grommet is designed from the original part for superior fitment and sealing. This part fits around the steering column to seal the column at the floorboard or firewall opening.
Steering Column Grommet
p/n: 70-0283-88
This Steering Column at Floor Grommet is designed from the original part for superior fitment and sealing. Part is molded from quality EPDM rubber to authentic original dimensions. This part fits around the steering column to seal the column at the body floor pan.
Steering Column To Floor Seal
p/n: 20-1072-36
This Steering Column To Floor Seal is designed from the original part for superior fitment and sealing. This molded rubber part fits around the steering column to seal the column at the body floor pan.
Steering Column and Clutch Pedal Floorplate
p/n: 60-0403-24
This Steering Column and Clutch Pedal Floorplate is used as the steering gear and clutch pedal push-rod dash seal. Fully molded with original style pattern. Does not have metal backing.
Gearshift Floorplate
p/n: 20-0464-88
Seals, transmission cover to floor. Cork and rubber. Three (3) piece set.
Gearshift Boot - Outer
p/n: 70-5169-26
This reproduction outer Gearshift Boot is designed from the original part for an authentic fit, finish and appearance. Molded rubber accordion shifter boot is an exact copy of the original.
Transfer Case Shift Lever Boot
p/n: 70-5201-26
This Transfer Case Shift Lever Boot is designed from the original part for superior fitment and function. This boot fits over the transfer case shift lever to make a weathertight connection for the transfer case shift rod as it passes up through the vehicle floorboard.
Ulta-Mat Firewall Heat and Sound Insulator Underlayment
p/n: 70-4779-88
This Ulta-Mat Firewall Heat and Sound Underlayment is a die-cut insulator material for the engine firewall interior side. Underlayment pieces are made from a flexible and lightweight foil facing foam rubber sound and heat insulation material.
Ulta-Mat Trunk Divider Heat and Sound Underlayment
p/n: 70-4777-88
This Ulta-Mat Trunk Divider Heat and Sound Underlayment is a die cut insulator material for the trunk divider piece. Underlayment pieces are made from a flexible and lightweight foil facing foam rubber sound and heat insulation material.