Torsion Bar Bushings
p/n: 70-1723-32
This Torsion Bar Bushing pair is a quality reproduction of the original factory part. Reproduction bushings have the correct shape and are designed like original parts.
Front Coil Spring Seat Insulators
p/n: 70-2302-35
This Front Coil Spring Seat Insulator pair is designed from the original part for superior fitment, finish, and function. Fully molded, mounts at top of front coil springs.
Rear coil spring pad
p/n: 50-0359-35
Insulators, rear coil spring. Fabric reinforced rubber as original. One (1) pair per car.
Rear Leaf Spring Shackle Bushing Set
p/n: 70-3344-35
This Rear Leaf Spring To Shackle Bushing Set is designed from the original part for superior fitment and function. The bushing installs into the leaf spring eye to fit between the rear shackle to leaf spring. This is a four (4) piece set for both rear leaf springs.
Spring Shackle Bushing Set
p/n: 20-1440-33
This Spring Shackle Bushing Set is for the rear of the rear leaf spring. This set is for two (2) inch leaf springs. Two (2) sets required per car.
Front Coil Spring Pad
p/n: 50-0476-35
Pad, front coil spring insulator, upper. Two (2) per car, five and one eighths (5-1/8) inch outside diameter. Height: .28125 inches.
Rear spring bushing
p/n: 60-0311-35
Bushing, rear spring front eye, inlox cartridge type as original.
Rear Coil Spring Insulator Set
p/n: 60-0261-32
This four (4) piece Rear Coil Spring Insulator Set is designed from the original part for superior fitment, finish, and function. The coil spring insulator installs to prevent metal to metal contact at the top and bottom of the coil spring seat mounting points.
Rear Coil Spring Insulators
p/n: 70-0945-32
This Rear Coil Spring Insulator pair is designed from the original part for superior fitment, finish, and function. The coil spring insulator installs to prevent metal to metal contact at the top and bottom of the coil spring seat mounting points.
Rear Leaf Spring Eye Bushings
p/n: 70-0663-32
This Rear Leaf Spring Eye Bushing pair is designed from the original part for superior fitment and function. Bushings are for the rear leaf spring front or rear spring eyes.
Leaf Spring Bushing and Bolt Set
p/n: 20-1836-32
This Leaf Spring Bushing and Bolt Set is for the front of the rear leaf spring. Includes Bushing, Bolt, and Self-Locking Nut.
Front Coil Spring Insulators
p/n: 40-0457-32
This upper or lower Front Coil Spring Insulator pair is designed from the original part for superior fitment, finish, and function. The coil spring insulator installs to prevent metal to metal contact at the top or bottom of the coil spring mounting points.
Spring Shackle Bushing Set
p/n: 20-0035-33
This Spring Shackle Bushing Set is an original style rubber leaf spring bushing used on the front of rear spring. One (1) set is required per spring.
Rear Leaf Spring Shackle Assembly
p/n: 20-2731-32
This Rear Leaf Spring Shackle Assembly is for the rear of the rear leaf spring. Designed from original parts for a precise, factory fit. Two (2) sets required per car.
Torsion bar bushing
p/n: 20-0667-36
Bushing, front axle pivot. Two (2) required per Truck. Twin I Beam suspension.
Front or Rear Leaf Spring Eye Bushing
p/n: 30-0081-32
A Front or Rear Leaf Spring Eye Bushing made from quality Nitrile rubber for a precise, factory like fit. Bushing fits at the rear of the front spring or the front of the rear spring.
Rear Leaf Spring Insulator
p/n: 70-2080-32
This Rear Leaf Spring Insulator is an exact replacement for the upper and lower spring insulator pad. Two and seven-eights (2-7/8) inches wide, with cloth reinforcement. Order four (4) per vehicle.
Rear Leaf Spring Eye Bushing
p/n: 30-0091-32
This Rear Leaf Spring Eye Bushing is designed from the original part for an authentic fit, finish and function. For the front eye of the rear leaf spring. Eight (8) required per car.
Rear Leaf Spring Eye or Shackle Bushing
p/n: 11-0014-32
This Rear Leaf Spring Eye or Shackle Bushing is designed from the original part for an authentic fit, finish and function. Bushing is 1-1/2" barrel diameter with 1/2" inside diameter hole. Replaces factory / Harris #998.
Rear Leaf Spring Shackle Assembly
p/n: 20-1066-32
This reproduction Rear Leaf Spring Shackle Assembly is complete with shackle bar plates, rubber bushings and lock nuts. For fitting the suspension leaf spring at its rear spring eye to the vehicle body. Two (2) sets required per car.
Front coil spring pad
p/n: 50-0358-35
Insulators, front coil spring. Fabric reinforced rubber as original.
Rear Leaf Spring Eye Bushing
p/n: 70-0588-32
A Rear Leaf Spring Eye Bushing made from quality EPDM rubber for a precise, factory like fit. Bushing fits at the front eye of the rear leaf spring. Four (4) per car.
Rear Leaf Spring Insulator
p/n: 70-0245-32
This cloth reinforced Rear Leaf Spring Insulator fits two and one fourth (2-1/4) inch wide leaf springs. Insulator installs to prevent metal to metal contact. Requires four (4) per vehicle.
Rear Leaf Spring Shackle Bushing
p/n: 30-0420-32
This Rear Leaf Spring Shackle Bushing is designed from the original part for superior fitment and function. Six (6) per car. Packard's "self-flanging" type.
Rear Leaf Spring Shackle Assembly
p/n: 20-1834-32
This Rear Leaf Spring Shackle Assembly is for the rear of the rear leaf spring on car models and the front of the front leaf spring on truck models. Two (2) sets needed per vehicle.