Front Spring To Frame Bumpers
p/n: 10-0133-35
This reproduction Front Spring To Frame Bumper pair is designed from the original part for an authentic fit and function. Vulcanized to steel core as original. Perfect copy.
Rear Axle Bumpers
p/n: 20-0342-32
This Rear Axle Bumper pair is designed from the original part for superior fitment and function. Bumper is manufactured with top quality materials for good durability.
Front Spring Bumper
p/n: 50-0240-35
Bumper, front spring axle to frame. Length: 1.875 inches. Width: 1.75 inches.
Front Spring Bumpers
p/n: 60-0561-32
This Front Spring to Frame Bumper pair is a quality reproduction of the original factory part. These axle to frame bottoming rebound pads are dense rubber blocks that mount to the front axle.
Front Suspension Upper Control Arm Bumpers
p/n: 60-0219-32
This Front Suspension Upper Control Arm Bumper pair is a quality reproduction of the original factory part. These EPDM dense rubber bumpers mount left and right control arms to function as the rebound bumper for the front springs.
Front Suspension Lower Control Arm Bumper
p/n: 20-0202-32
This Front Suspension Lower Control Arm Bumper is designed from the original part for superior fitment, finish, and function. This suspension bumper mounts to the front lower control arm to prevent metal to metal contact.
Torsion Tension Pin Gaskets
p/n: 70-1869-32
This Torsion Tension Pin Gasket pair is designed from the original part for superior fitment and function.
Front Suspension Upper Control Arm Bumpers
p/n: 50-0091-32
This Front Suspension Upper Control Arm Bumper pair is a quality reproduction of the original factory part. These EPDM dense rubber bumpers mount left and right control arms to function as the rebound bumper for the front springs.
Rear Axle Bumpers
p/n: 60-0678-32
This Upper Rear Axle Bumper pair is a quality reproduction of the original factory part. A reproduction bumper with the correct shape and design like original.
Rear Axle Bumpers
p/n: 27-0089-32
This Rear Axle Bumper pair is a quality reproduction of the original factory part. Rebound bumper is a dense rubber block that mounts by bracket to the rear axle tube.
Rear Axle Bumper
p/n: 40-0252-32
This Rear Axle Bumper is a quality reproduction of the original factory part. A reproduction bumper with the correct shape and design like original. Three (3) per car.
Rear Axle Bumpers
p/n: 70-1619-32
This Rear Axle Bumper pair is a quality reproduction of the original factory part. Reproduction bumpers with the correct shape and design like original.
Front Suspension Lower Control Arm Bumper
p/n: 50-0092-32
This Front Suspension Lower Control Arm Bumper is a quality reproduction of the original factory part. This Nitrile dense rubber bumper mount to the left or right lower control arm to function as the rebound bumper. Two (2) per car required.
Suspension Bushing
p/n: 70-3345-35
Bushing, rear shackle to body insulating mounts, upper. This is a four (4) piece set. Replaces OEM # 397225
Front Suspension Upper Control Arm Bumpers
p/n: 60-0666-32
This Front Suspension Upper Control Arm Bumper pair is a quality reproduction of the original factory part. These EPDM dense rubber bumpers mount left and right control arms to function as the rebound bumper for the front springs.
Traction Bar Bumper
p/n: 70-2293-35
This Traction Bar Bumper is designed from the original part for superior fitment and function. An excellent reproduction of part found on models with radius rod traction bars.
Front or Rear Suspension Bumper
p/n: 70-1021-32
This reproduction Front or Rear Suspension Bumper is designed from the original part for an authentic fit, finish, and appearance. Commonly uses two (2) bumpers per car on the front suspension and one (1) bumper per car on the rear suspension.
Rear Axle Track Bar Bushings
p/n: 25-0080-32
This Rear Axle Track Bar Bushing pair is designed from the original part for superior fitment and function. These reproductions are manufactured in halves for easier replacement. Sold in pairs, two (2) pair needed per track bar.
Axle Rebound Pad
p/n: 50-0050-35
Pad, axle rebound, one and three eighths (1-3/8) inch diameter by two (2) inch. Fits metal retainer. Height: 2.0 inches.
Rear Axle Bumper
p/n: 20-0939-32
This Rear Axle Bumper pair is a quality reproduction of the original factory part. A dense rubber bonded to a threaded mounting stud.
Front Suspension Lower Control Arm Inner Dust Seals
p/n: 70-0646-32
Four (4) piece Front Suspension Lower Control Arm Inner Dust Seal set is a quality reproduction of the original factory part. These Nitrile dense rubber inner dust seals install to the left and right front lower control arms.
Front Axle Bumper
p/n: 20-0938-32
This Front Axle Bumper is a quality reproduction of the original factory part. Fully molded with top quality EPDM rubber.
Steering Column To Dash Clamp Insulator
p/n: 60-0563-32
This reproduction Steering Column To Dash Clamp Insulator is designed from the original part for an authentic fit, finish and appearance. This Column to Dash Pad installs at the steering column U-clamp.
Front Axle Bumpers
p/n: 20-2175-33
This Front Axle Bumper pair is designed from the original part for an authentic fit, finish and function. These Bumpers are manufactured with top quality materials for good durability.