1-1/4" Rear Bumper Weatherstrip
p/n: 27-0106-30
Weatherstrip, rear bumper to body. Available by the foot.
Door Handle Mounting Pad
p/n: 20-0577-86
Outside Door Handle Mounting Pad - Designed from an original part so it fits correctly.
Door or Tailgate Bumper
p/n: 33-1228-71
This Door Bumper is fully molded and designed from the original part for superior fitment. This rubber bumper attaches to the vehicle body to support / cushion the door closure. Usually requires two (2) bumpers each per vehicle.
Rear Bumper Filler
p/n: 27-0095-30
Filler, rear bumper to body. Die cut three thirty seconds (3/32) inch rubber to original profile.
Rear Bumper Step Pad Set
p/n: 70-3637-87
This rear bumper step pad set contains the left, center, and right side step pads in the tailgate opening. They are fully molded with brass cores and designed from originals with factory style tread. All three pieces have correctly placed screw holes and are ready to install.
Rear Hatch Door Bumpers
p/n: 70-4731-87
This Rear Hatch Door Bumper pair is a quality reproduction of the original factory part. These adjustable rubber bumpers attach to the rear hatch door to prevent the hatch lid from vibrating.
Rear Hatch Door Bumpers
p/n: 70-4730-87
This Rear Hatch Door Bumper pair is a quality reproduction of the original factory part. These adjustable rubber bumpers attach to the rear hatch door to prevent the hatch lid from vibrating.
Rear Liftgate Bumper
p/n: 70-4961-87
This Rear Liftgate Bumper is designed from the original part for superior fitment, finish and function. This bumper fits on the liftgate and is made from high quality ozone resistant EPDM rubber. Sold as a single piece.
Rear Liftgate Bumpers
p/n: 70-4833-87
This fully molded Rear Liftgate Bumper pair is a quality reproduction of the original factory part. These two (2) rubbers bumpers attach to the vehicle rear liftgate to support / cushion the liftgate closure.
Rear Shield to Bumper Seal
p/n: 30-0476-44
This Rear Shield to Bumper Seal is made of high quality EPDM dense rubber. The seal is designed from an original part so it fits correctly. Overall length is seven (7) feet.
Tailgate Bumper
p/n: 20-0888-45
These Tailgate Bumpers are designed from original parts for a correct fit. Sold as a pair.
Tailgate Bumper
p/n: 20-0801-45
This Tailgate Bumper is used as a retaining support. Two (2) are required per truck.
Tailgate Bumper
p/n: 70-1910-87
This Tailgate Bumper is designed from the original part for superior fitment, finish and function. This station wagon tailgate bumper is commonly used on GM station wagon models.
Tailgate Bumper
p/n: 70-1609-87
This Tailgate Bumper is a quality reproduction of the original factory part. Made of a high-quality EPDM rubber, the bumper attaches to the vehicle body to support / cushion the tailgate closure.
Tailgate Bumper
p/n: 20-0694-45
These Tailgate Bumpers are sold as pair. The bumpers fit in brackets and comes with chains.
Tailgate Bumper
p/n: 20-1528-87
This Tailgate Bumper is quality reproduction of the original factory part. This rubber bumper attaches to the vehicle body to support / cushion the tailgate closure. Includes right and left bumpers & corresponding attaching screws.
Tailgate bumper
p/n: 70-2854-87
Bumper, tailgate support. Two (2) bumpers mount on tailgate and two (2) mount on body in lower sections. Four (4) required.
Tailgate Bumper - Upper and Lower
p/n: 70-1827-87
This upper / lower Tailgate Bumper is designed from the original part for superior fitment and seal. Fully molded with top quality EPDM rubber over corrosion resistant brass cores to ensure durability and function.
Tailgate Bumper Set
p/n: 70-4494-87
This four (4) piece Tailgate Bumper Set is designed from the original part for superior fitment and function. These bumpers fit on each side of the body to tailgate opening at the bottom of the opening and on each side.
Tailgate Drain Seals
p/n: 70-4007-84
This Tailgate Drain Seal pair includes right and left sides that install at the bottom of the tailgate. These seals are properly molded from originals for a factory like fit.
Tailgate Drain Seals - Body Side
p/n: 70-4008-85
This Tailgate Drain Seals - Body Side seal pair includes both right and left sides. These seals are properly molded from originals for a factory like fit.
Tailgate Glass Lower Bumper
p/n: 70-5015-87
This Tailgate Glass Lower Bumper pair is designed from the original part for an authentic fit, finish, and appearance. These bumper stops install in the lower tailgate to cushion the glass when lowered down.
Tailgate Glass Run Channel
p/n: 70-3001-58
This Tailgate Glass Run Channel presses into the channel in the rear of the shell and the glass then rolls up into the run channel. Made from original specs and from high quality ozone resistant materials to fit your vehicle.
Tailgate Handle Gasket
p/n: 70-3867-86
This Tailgate Handle Gasket is die-cut sponge rubber to authentic original dimensions.
Tailgate Handle Mounting Plate Pad
p/n: 70-5014-86
This Tailgate Handle Mounting Plate Pad is designed from the original part for superior fitment and function. A precision die-cut flat rubber pad. Installs between the handle mounting place and the tailgate.
Tailgate Lock Base Gasket
p/n: 70-4965-86
This reproduction Tailgate Lock Base Gasket is die-cut from quality materials to the original design for superior performance, durability, and a factory like fit. Commonly used during a vehicle re-paint.
Tailgate Outer Window Felt Weatherstrip
p/n: 80-0011-57
This reproduction Original material Tailgate Glass Outer Window Felt Weatherstrip is designed from the original part for superior fitment and seal. This flat chrome bead outer window felt wipes the outside tailgate window glass when the glass is lowered.
Tailgate run channel filler
p/n: 70-3302-87
Tailgate glass run channel, upper molded section, left and right. Molded piece with metal core ready to attach to tailgate window run channel.
Tailgate Side Seals
p/n: 70-4009-85
This Tailgate Side Seals includes right and left side with installation screws. These seals are properly molded from originals for a factory like fit.
Tailgate to Body Bumpers
p/n: 70-4493-87
This Tailgate to Body Bumper pair is designed from the original part for superior fitment and function. This body bumper fits on each side of the body to tailgate opening on the body and adjacent to the striker knob on each side.
Tailgate To Body Weatherstrip
p/n: 70-4020-45
This Tailgate To Body Weatherstrip is properly molded from originals for a factory like fit and appearance.
Tailgate weatherstrip
p/n: 20-1526-87
Weatherstrip, tailgate lower glass sash channel. Goes between glass and channel.
Tailgate Weatherstrip Filler
p/n: 70-2056-87
Filler, tailgate weatherstrip at beltline, on body. Fully molded with holes for attaching pins.Length: 4.0 inches.
Tailgate wedge
p/n: 70-2855-87
Wedge, tailgate bumper anti-rattler. Mounts on both end jamb areas on tailgate.
Tailgate Window Felt Beltline Weatherstrips
p/n: 80-0804-57
This Tailgate Glass Window Felt Beltline Weatherstrip reproduction pair is designed from the original part for superior fitment and seal. This window felt molding mounts to the tailgate with the included fasteners.
Tailgate Window Felt Beltline Weatherstrips
p/n: 80-1082-57
This reproduction authentic style Tailgate Window Felt Beltline Weatherstrip pair is designed from the original part for superior fitment and function. These Innner and Outer anti-rattler window felts wipe the tailgate window glass when the glass is lowered.
Tailgate Window Felt Weatherstrip
p/n: 80-0294-57
Tailgate window horizontal seal. These strips wipe the tailgate window when the glass is lowered. They come ready to install with finished ends and body curvature bends.
Tailgate Window Felt Weatherstrip
p/n: 80-0289-57
Tailgate window horizontal seal. These strips wipe the tailgate window when the glass is lowered. They come ready to install with finished ends and body curvature bends.