Windshield Gasket
p/n: 20-1876-50
This Windshield Gasket is designed from the original part for superior fitment and seal. It also has the slot to accommodate the outer edge's decorative molding.
Windshield Gasket without Groove
p/n: 70-3542-50
This Windshield Gasket mounts around the full perimeter of the front glass and has properly molded corners for a precise, factory fit.
Windshield Gasket
p/n: 20-1874-50
This Windshield Gasket mounts around the full perimeter of the front glass. The weatherstrip has vulcanized, or bonded, ends which means no cutting or splicing is required. This weatherstrip has a groove for a Stainless Molding on the bottom strip.
Windshield Gasket
p/n: 20-1107-50
This Windshield Gasket mounts around the full perimeter of the front glass and has properly molded corners for a precise, factory fit. It also has the slot to accommodate the outer edge's decorative chrome molding.
Windshield Gasket
p/n: 20-1731-50
This Windshield Gasket mounts around the full perimeter of the front glass and has properly molded corners for a precise, factory fit. Gasket has a groove for chrome molding on the top and bottom of the gasket.
Windshield Gasket - No Groove
p/n: 20-2519-50
This Windshield Gasket mounts around the full perimeter of the front glass and has the divider bar molded directly into it for a precise, factory fit. This windshield gasket has no molding slot and is for cars with no chrome.
Windshield Gasket w/Double Groove
p/n: 20-2517-50
This Windshield Gasket mounts around the full perimeter of the front glass and has the divider bar molded directly into it for a precise, factory fit. It also has a double groove to accommodate the outer edge's decorative chrome molding.
Windshield Gasket w/Double Groove
p/n: 20-2516-50
This Windshield Gasket mounts around the full perimeter of the front glass and has the divider bar molded directly into it for a precise, factory fit. It also has a double groove to accommodate the outer edge's decorative chrome molding.
Windshield Gasket w/Groove
p/n: 20-3032-50
This Windshield Gasket is designed from the original part for superior fitment and seal. This gasket has a groove completely all around the gasket to accommodate the outer edge's decorative chrome molding.
Windshield Gasket w/Groove
p/n: 20-3028-50
This Windshield Gasket mounts around the full perimeter of the front glass and has properly molded corners for a precise, factory fit. It also has the slot to accommodate the outer edge's decorative chrome molding.
Windshield Gasket w/Groove
p/n: 20-3031-50
This Windshield Gasket is designed from the original part for superior fitment and seal. This gasket has a slot only on the bottom of the seal to accommodate the outer lower edge's decorative chrome molding.
Windshield Gasket w/Single Groove
p/n: 20-2520-50
This Windshield Gasket mounts around the full perimeter of the front glass and has the divider bar molded directly into it for a precise, factory fit. It also has a single groove to accommodate the outer edge's decorative chrome molding.
Windshield Gasket
p/n: 70-2192-50
This Windshield Gasket mounts around the full perimeter of the front glass and has properly molded corners for a precise, factory fit. It requires a locking strip for installation (not included). Locking strips are available in either black or chrome.
Windshield Gasket
p/n: 10-0137-52
This Windshield Gasket mounts around the full perimeter of the front glass. It has the slot to accommodate the outer edge's decorative molding and the ends may require trimming and bonding for installation.
Windshield Gasket With Groove
p/n: 70-4506-52
This Windshield Gasket With Groove mounts around the full perimeter of the front glass and has properly molded corners for a precise, factory fit. This seal has the slot to accommodate chrome trim reveal molding.
Windshield Gasket
p/n: 60-0186-50
This Windshield Gasket mounts around the full perimeter of the front glass and has the divider bar molded directly into it for a precise, factory fit.
Windshield Gasket
p/n: 20-2778-50
This Windshield Gasket mounts around the full perimeter of the front glass and has properly molded corners for a precise, factory fit.
Windshield Gasket
p/n: 70-2468-50
This Windshield Gasket mounts around the full perimeter of the front glass and has properly molded corners for a precise, factory fit. It also has the slot to accommodate the outer edge's decorative molding.
Swing-Out Windshield Weatherstrip
p/n: 40-0329-50
This Swing-Out Windshield Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts into the metal channel attached to the glass and creates a seal when the glass is pressed against the body of the vehicle.
Windshield Molding Set
p/n: 70-3987-50
This five (5) piece Windshield Molding Set contains the two (2) outer reveal molding (left and right) pieces, two (2) reveal molding clips and the windshield inner support strip.
Windshield Gasket - No Groove
p/n: 70-4327-52
This windshield gasket mounts around the full perimeter of the front glass and has properly molded corners for a precise, factory fit. Part is a standard black gasket with no reveal molding groove.
Swing-Out Windshield Weatherstrip
p/n: 70-0057-52
This Swing-Out Windshield Weatherstrip is designed from the original part for superior fitment, finish and sealing function. This windshield weatherstrip is common for most Chrysler models. May also be found in DeSoto, Dodge and Plymouth models. Also used in Packard and Studebaker models.
Windshield Gasket
p/n: 70-1702-50
This Windshield Gasket is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the front glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation.
Windshield to Cowl Weatherstrip
p/n: 10-0127-52
This windshield weatherstrip comes in a thirty-six inch (36") strip and seals the lower windshield frame to the cowl of the car. This generic part is known to fit Independent vehicle models produced from 1920 - 1924.
Windshield Gasket without Trim Groove
p/n: 70-2455-50
This Windshield Gasket mounts around the full perimeter of the front glass for a precise, factory fit. This is a standard black gasket without trim groove, made from ozone resistant EPDM rubber to the same OE specs as the original for an authentic fit and finish.