Body Parts, Other
Gravel Shield
p/n: 70-0093-45
Rear body deflector apron or valance. Original copy including fastening bolt holes. You locate exhaust hole where needed. Approximately fifty eight (58) inches long.
Shaker air cleaner seal
p/n: 20-2766-45
Seal, shaker air cleaner. Includes drain hose and FoMoCo script. Made from Original Ford tooling.
Runningboard edge seal
p/n: 70-0358-45
Seal strip, runningboard to body lower edge, exact copy. Top quality, each strip six (6) foot long.Length: 72.0 inches. Height: .5625 inches.
Runningboard edge seal
p/n: 30-0169-44
Liner, runningboard to body, (side apron to body seal). Set consists of two (2) pieces seven (7) foot long. One (1) inch width is after fold over.
Toe board liner
p/n: 30-0254-20
Liner, toe board, top, with correct beaded edge and shape as originally found.Length: 28-50 inches.
Rumbleseat step pad
p/n: 60-0501-45
Step pad, rumbleseat, on rear fender, with bowtie emblem. Steel core with bolt.Width: 4.375 inches. Height: 5.25 inches.
Body anti-squeak 64 inch strip
p/n: 70-1117-45
Filler, runningboard-to-body, sixty four (64) inch long strip. For forty (40) inch strips see our #70-1116-45.
Rear wheelhouse seal
p/n: 60-0354-45
Seal, rear wheelhouse panel-to-quarter panel, outer. Two (2) five (5) foot strips, one for each side.Length: 60.0 inches. Width: .21875 inches.
Removable top header seal
p/n: 20-0960-45
Seal, removable roof front. Mounts on the front of the shell. Used on fiberglass roof.
Body anti-squeak 40 inch strip
p/n: 70-1116-45
Filler, runningboard-to-body, forty (40) inch long strip. For sixty four (64) inch strips see our #70-1117-45.
Fenderskirt edge seal
p/n: 60-0298-45
Seal, wheel streamliner (fenderskirt) to fender. Two (2) strips each cut five (5) foot long.Length: 60.0 inches. Width: .625 inches.
Exterior body paint kit
p/n: 82-0026-44
Gasket set, exterior body repaint. Set includes door handle gaskets, lock cylinder gaskets, tail lamp gaskets, and side turn signal gaskets.
Cowl to fender seal
p/n: 70-2787-43
Seal, cowl-to-fender. Die cut masticated rubber to authentic original dimensions. Includes all factory holes required for installation.
Body hole plug kit
p/n: 20-2705-20
Plug kit, complete rubber. Includes quarter drain valves and installation instructions. MCA approved. Forty-four (44) piece set.
Exterior body paint kit
p/n: 82-0027-44
Gasket set, exterior body repaint. Set includes door handle gaskets, lock cylinder gaskets, taillight gaskets, and side turn signal gaskets.
Body hole plug kit
p/n: 20-2704-20
Plug kit, complete rubber. Includes quarter drain valves and installation instructions. MCA approved. Thirty eight (38) piece set.
Rumbleseat step pad
p/n: 60-0126-45
Pad, rumbleseat step, on rear bumper bracket or fender. Rubber cover only, full slip-over type with bowtie emblem.
Body hole plug kit
p/n: 20-2703-20
Plug kit, complete rubber. Includes quarter drain valves and installation instructions. MCA approved. Thirty-three (33) piece set.
Rumbleseat step mounting pad
p/n: 70-0043-44
Pad, rumbleseat step mounting for fender, double beaded edge per original.Width: 4.375 inches.
Cowl to fender seal
p/n: 70-2794-43
Seals, cowl to fender. Die cut masticated rubber to authentic original dimensions. Includes all factory holes required for installation.
Cowl to fender seal
p/n: 70-2790-43
Seal, cowl-to-fender. Die cut masticated rubber to authentic original dimensions. Includes all factory holes required for installation.
Body hole plug kit
p/n: 20-2702-20
Plug kit, complete rubber. Includes quarter drain valves and installation instructions. MCA approved. Thirty two (32) pieces.
Louver mounting pad
p/n: 20-2857-83
Gaskets, fastback rear window louver mounting. Six (6) piece set.
Cowl to fender seal
p/n: 70-3076-43
Seal, cowl to fender. Two (2) piece set. Die cut masticated rubber.
Hydraulic window lift grommet
p/n: 70-0642-21
Grommet, window lift hydraulic line through floor panel. Single hole type (for two (2) hole type, see our #70-0643-21).Length: 1.5 inches. Width: 1.
Hydraulic window lift grommet
p/n: 70-0643-21
Grommet, window lift hydraulic lines through floor panel, 2-hole style (for cars requiring single-hole style, see our #70-0642-21).Length: 1.5 inches.
Body hole plug kit
p/n: 20-2706-20
Plug kit, complete rubber. Does NOT include quarter drain valves. Includes installation instructions. MCA approved. Thirteen (13) piece set.
Lock Pillar Water Deflector
p/n: 70-3635-62
Door panel water deflector, at lock. Fully molded for both left and right hand sides.
Rocker panel dust shield cover
p/n: 70-2392-45
Cover, rocker panel inner dust shield. Fully molded with proper attaching teeth and flap.
Cowl to fender seal
p/n: 70-3075-43
Seal, cowl to fender. Two (2) piece set. Die cut masticated rubber.
Floor Pan Plug
p/n: 35-0576-45
Plug, floor pan, oval, self-retaining, fits one fourth (1/4) inch by nine sixteenths (9/16) inch hole. Width: .75 inches.
Floor Plug
p/n: 35-3508-45
Plug, floor pan. Fully molded rubber. Up to ten (10) used per vehicle. Fits: 1971-1975: Vega Panel Express. Possible fit for all other 1971-1975: Vega styles.
Roof insert seal
p/n: 20-0102-45
Seal, top insert for closed cars without turret top. Fits groove between cloth top center panel and steel surround.
Pickup tie down mounting pad
p/n: 20-0885-45
Pad, pickup box tie down hook. Eight (8) required per truck.
Insulator
p/n: 30-0404-48
Insulator, used on various places on vehicle. 1937: Eight (8) required per car for horn bracket to dash 1937-39: Uses 6 per car for muffler rear support bracket. 1938-40: Uses 10 to 14 per car runningboard to frame bracket 19
Body hole plug
p/n: 35-0863-45
Plug, body sheet metal holes. Used in various places (like trunks). For one and one half (1-1/2) inch hole in body.
Body Hole Plug
p/n: 20-1041-21
Plug, cowl and floor pan. This body plug covers a sheet metal hole that is one and one seven eighths (1-7/8) inch in diameter.
Antenna hole plug
p/n: 35-0327-45
Plug, antenna mounting for inner front fender at shroud. For vehicles without fender-mounted antenna.
Firewall grommet
p/n: 32-0134-20
Special grommet with wide spacing for frame metal to pass electrical wiring and cables through frame. Sheet Metal Hole: 1-1/16" Center Hole: 13/16" Outside Diameter: 1-5/16" Slot Width: 5/32"
Body Hole Plug
p/n: 20-0843-20
Plug, style-side bed side panel. One and five eighths (1-5/8) inch diameter. Fits 1-1/16" hole.
Floor pan plug
p/n: 35-0262-20
Plug, floor pan, rear compartment and body. Up to 12 per car, as required.
Body Hole Plug
p/n: 20-1040-21
Plug, hole in dog leg cover. Installs at front of door where bolt to adjust vent window frame is located. This body plug covers a sheet metal hole that is one and one half (1-1/2) inch in diameter.
Body Hole Plug
p/n: 20-1039-21
Plug, cowl and floor pan. This body plug covers a sheet metal hole that is one and one fourth (1-1/4) inch in diameter.
Wiring grommet
p/n: 32-0369-20
Grommet, wiring harness through fender skirts, or hood latch lower mounting panels. Also other miscellaneous uses. Sheet Metal Hole: 1-1/16" Center Hole: 3/4" Outside Diameter: 1-3/8" Slot Width: 1/16"
Glove box and license plate bumper
p/n: 20-2889-45
Bumpers, glovebox and/or license plate. Used as glove box door bumpers for 65-66 and 71-73 models, used as license plate bumper for 65-70 models.