Fuel Filler Neck Grommet
p/n: 70-2581-39
This Fuel Filler Neck Grommet is designed from the original part for superior fitment and seal. This grommet fits around the vehicles fuel filler neck between the filler neck and vehicle body.
Splash Apron
p/n: 20-0230-44
This two (2) piece Splash Apron is designed from the original part for superior fitment and seal. Used to keep debris from entering the engine compartment.
1968-1975 Pontiac Factory Parts Manual, CD
p/n: 07-1414-07
This GM Licensed Detroit Iron CD provides the most comprehensive set of digital Pontiac Factory parts manuals. The factory manuals on this CD were professionally scanned from the original service and parts manuals.
Beltline Weatherstrip
p/n: 70-1120-61
This Beltline Weatherstrip comes in a six (6) foot length for the outer beltline (sometimes called "scraper seal"). For use on front, rear, and quarter windows without a chrome reveal molding at the window beltline. Available in 6ft lengths.
Rear Liftgate Window Gasket without Groove
p/n: 70-4003-83
This Rear Liftgate Window Gasket without Trim Groove fits the rear liftgate window of the Bronco's Removable Hardtop. It's made from ozone resistant EPDM rubber and to the same specifications as the original for an authentic factory fit and finish.
Rear Window Gasket with Trim Groove
p/n: 70-4002-81
This Rear Window Gasket with Trim Groove fits the Bronco Half Cab - Pickup models only. The gasket mounts around the full perimeter of the back glass and has properly molded corners. This gasket has the trim groove slot to accommodate the outer edge's decorative molding.
Rear Window Gasket without Trim Groove
p/n: 70-4001-81
This Rear Window Gasket without Trim Groove fits the Bronco Half Cab / Pickup models only. The gasket mounts around the full perimeter of the back glass and has properly molded corners for a precise, factory fit.
Trunk Weatherstrip
p/n: 20-2867-84
This Trunk Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.
Window Felt Inner Beltline Weatherstrips
p/n: 80-0417-57
This is a high-quality material Window Felt Inner Beltline side window horizontal weatherstrip set (also known as beltline weatherstrip). This two (2) set includes only the inner seals (the part sealing the interior of the car) for the door side windows.
Fuel Filler Pipe To Trunk Floor Seal
p/n: 20-2739-41
This Fuel Filler Pipe To Trunk Floor Seal is designed from the original part for superior fitment and seal. This part fits around the vehicles fuel filler pipe between the filler pipe and the trunk floor.
Liftgate to Tailgate Weatherstrip
p/n: 70-4158-85
This Liftgate to Tailgate Weatherstrip reproduction is designed from the original part for superior fitment and seal. This liftgate seal mounts to the liftgate with screws (not included).
Peel-N-Stick Trunk Weatherstrip
p/n: 70-3050-WT
This Peel-N-Stick Trunk Weatherstrip is designed for superior fitment and seal. The weatherstrip mounts around the full perimeter of the trunk decklid to seal directly to the body. Easy to install 3M Peel-N-Stick backing provides superior adhesion for reliable performance.
Peel-N-Stick Trunk Weatherstrip
p/n: 70-1438-WT
This Peel-N-Stick Trunk Weatherstrip is designed for superior fitment and seal. The weatherstrip mounts around the full perimeter of the trunk decklid to seal directly to the body. Easy to install 3M Peel-N-Stick backing provides superior adhesion for reliable performance.
Rear Window Gasket without Groove
p/n: 70-4513-83
This Rear Window Gasket for Standard Cabs mounts around the full perimeter of the back glass. This is a standard black EPDM rubber seal with NO reveal molding groove.
Window Locking Strip - Chrome
p/n: 70-2196-52
This Chrome Locking Strip is used to retain windshield gaskets in pickups and vans. Designed from the original part for superior fitment, finish and function. Available in 16ft. lengths.
Body Bumper Kit
p/n: 90-0200-90
This sixteen (16) piece Body Bumper Kit is designed from the original part for superior fitment, finish and function. Designed from originals and made from top quality rubber to ensure durability.
Side Window Vertical Leading Edge Weatherstrips
p/n: 50-0344-80
This Side Window Vertical Leading Edge Weatherstrips pair is designed from the original part for superior fitment and seal. This part attaches to the vertical edge of the rear side windows when the rear side windows are fully raised.
Front Lower Control Arm Bumper
p/n: 20-0202-32
This Front Lower Control Arm Bumper is designed from the original part for superior fitment, finish, and function. This suspension bumper mounts to the front lower control arm to prevent metal to metal contact.
Hood to Cowl Weatherstrip
p/n: 70-1253-42
This Hood To Cowl Weatherstrip is designed from the original part for superior fitment and seal. This weatherstrip mounts at the rear of the engine bay directly to the body. Seventy-two (72") inches OAL and includes fifteen (15) 70-1255-42 plastic clips for installation.
Rear Cargo Door Hinge Gaskets Set
p/n: 60-0659-69
This four (4) piece molded Rear Cargo Door Hinge Gasket Set is made to original specifications for proper fitment. Seals are fully molded from top quality rubber to ensure durability, fitment and proper seal.
Clutch Release Lever Boot
p/n: 20-0761-24
This Clutch Release Lever Boot is designed from the original part for superior fitment and seal. This boot is for the clutch release lever to clutch housing.
Front Suspension Rubber Bumper Set
p/n: 82-0176-32
Front Suspension Rubber Bumper Kit - A four (4) piece set with both upper and lower arm rubber bumpers in one set.
Removable Rear Window Gasket
p/n: 70-3949-81
This Removable Rear Window Gasket is designed from the original part for superior fitment and sealing. This rear window gasket has the properly molded corners for a precise and like factory fit.
Body Bumper Kit
p/n: 90-0217-90
This fourteen (14) piece Body Bumper Kit is designed from the original part for superior fitment, finish and function. Designed from originals and made from top quality rubber to ensure durability.
Firewall to Hood Weatherstrip - Cowl Lacing
p/n: 20-1091-42
This Firewall To Hood Weatherstrip - Cowl Lacing mounts under the rear of the hood on the cowl panel. This is a die-cut extrusion with pre-installed clips as original.
Quarter Window Vertical Leading Edge
p/n: 70-4772-80
This Quarter Window Vertical Leading Edge pair is the vertical piece of weatherstrip that seals between the door glass and the rear quarter window glass when the quarter window is raised and closed.
Hood to Cowl Weatherstrip
p/n: 70-1640-43
This Hood to Cowl Weatherstrip is designed from the original part for superior fitment and seal. This 38-1/2” long x 11/16” wide weatherstrip provides complete coverage.
Firewall to Hood Weatherstrip - Cowl Lacing
p/n: 70-3374-42
This Firewall to Hood Weatherstrip - Cowl Lacing is designed from the original part for superior fitment and seal. Measuring 67-1/2” long x 1-1/4” wide to provide complete coverage.
Axle Rebound Pad
p/n: 20-0647-32
Bumper, rear axle. Two (2) required per Truck. 1965-72: F100, F350 2 W/D (wheel drive), F100, F250 4 W/D (wheel drive).
Steering Column To Floor Seal
p/n: 20-0785-36
This Steering Column To Floor Seal is designed from the original part for superior fitment and seal. Restores the cab to floor sealing against the outside elements. For Manual Steering models.
Heat and Sound Insulator Underlayment Set
p/n: 70-4672-88
This four (4) piece die-cut Heat and Sound Insulator Underlayment Set lays under the carpet. This underlayment will decrease road noise and decrease heat inside the interior compartment. Pre-cut and ready to be installed into your vehicle to improve driving comfort.
Heat and Sound Insulator Underlayment Set
p/n: 70-4671-88
This four (4) piece die-cut Heat and Sound Insulator Underlayment Set lays under the carpet. This insulator underlayment will decrease road noise and decrease heat inside the interior compartment. Pre-cut and ready to be installed into your vehicle to improve driving comfort.
Window Felt Beltline Weatherstrips - 3ft Pair
p/n: 30-0244-57
This side window Window Felt Beltline Weatherstrip pair can be used as inner and/or outer. The weatherstrip is flexible, pile lined, rubber covered, with black bead. Available in 3ft pairs.
Vent Window Division Post Seal
p/n: 70-3870-56
This Vent Window Division Post Seal is fully molded with metal core and attaching tabs.
Brake and clutch shank seal
p/n: 20-0758-23
Seal, clutch rod to floor. Useage: 1971-72: F100-350 series AFTER Serial #M00,001 1973-79: F100-350 series trucks
Radiator Mounting Insulator Pads
p/n: 70-2238-31
A four (4) piece set of Radiator Mounting Insulator Pads. For use on all four corners of the radiator. For vehicle models with three (3) wide core radiators.
Trunk Weatherstrip
p/n: 70-1438-85
This Trunk Weatherstrip is designed from the original part for superior fitment and seal. The weatherstrip mounts around the full perimeter of the trunk directly to the body.
Trunk Weatherstrip
p/n: 70-3050-84
This Trunk Weatherstrip is designed from the original part for superior fitment and seal. The weatherstrip mounts around the full perimeter of the trunk directly to the body.
Hood to Cowl Weatherstrip
p/n: 70-3146-42
This three (3) piece Hood To Cowl Weatherstrip is designed from the original part for superior fitment and seal. An exact reproduction of the original profile. This weatherstrip set installs at the rear of the engine bay to seal between the hood and vehicle body cowl.
U Jamb Lock Pillar Filler
p/n: 82-0075-79
This U Jamb Lock Pillar Filler seals the bottom of the rear side window, and may also be known as a door jamb seal. Fully molded authentic rubber construction with metal core.
U Jamb Lock Pillar Filler
p/n: 82-0064-79
This U Jamb Lock Pillar Filler seals the bottom of the rear side window, and may also be known as a door jamb seal.
Peel-N-Stick Trunk Weatherstrip
p/n: 70-0773-WT
This Peel-N-Stick Trunk Weatherstrip is designed from the original part for superior fitment and seal. The weatherstrip mounts around the full perimeter of the trunk directly to the body.
Windshield Frame Upper (Header) Weatherstrip
p/n: 70-4476-52
This Windshield Frame Upper (Header) Weatherstrip is designed from the original part for superior fitment and sealing. This windshield frame upper weatherstrips mounts to seal between the windshield frame and hardtop of the vehicle. Made of a high-quality EPDM rubber as the original.
Convertible Top Decklid Weatherstrip
p/n: 70-3950-67
This Convertible Top Decklid Weatherstrip is designed from the original part for a superior fitment and seal. This rubber seal mounts around the full perimeter of the soft top storage compartment.
Peel-N-Stick Trunk Weatherstrip
p/n: 70-0774-WT
This Peel-N-Stick Trunk Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body. Easy to install 3M Peel-N-Stick backing provides superior adhesion for reliable performance.
Spring Shackle Bushing Set
p/n: 20-0867-32
This Spring Shackle Bushing Set is for one (1) front of the rear leaf spring. Designed from original parts for a precise, factory fit.
Upper Door - Roof Rail Weatherstrips
p/n: 70-2436-73
This Upper Door - Roof Rail Weatherstrip pair is made of high-quality EPDM rubber with vulcanized corners for a factory like fit. These upper, left and right door weatherstrips seal the door window frame to the hardtop and to the windshield frame.