Removable Rear Window Gasket
p/n: 70-3949-81
This Removable Rear Window Gasket is designed from the original part for superior fitment and sealing. This rear window gasket has the properly molded corners for a precise and like factory fit.
Front Suspension Rubber Bumper Set
p/n: 82-0176-32
Front Suspension Rubber Bumper Kit - A four (4) piece set with both upper and lower arm rubber bumpers in one set.
Clutch Release Lever Boot
p/n: 20-0761-24
This Clutch Release Lever Boot is designed from the original part for superior fitment and seal. This boot is for the clutch release lever to clutch housing.
Body Bumper Kit
p/n: 90-0217-90
This fourteen (14) piece Body Bumper Kit is designed from the original part for superior fitment, finish and function. Designed from originals and made from top quality rubber to ensure durability.
Vent Window Division Bar Weatherstrips
p/n: 70-3632-56
This Front Vent Window Division Bar Weatherstrip pair is designed from the original part for superior fitment and seal. This part fits opposite the glass run channel and seals the vent window when the vent is closed.
Hood to Cowl Weatherstrip
p/n: 70-1640-43
This Hood to Cowl Weatherstrip is designed from the original part for superior fitment and seal. This 38-1/2” long x 11/16” wide weatherstrip provides complete coverage.
Side Window Vertical Leading Edge - Fastback
p/n: 20-2842-80
This Side Window Weatherstrip pair is the vertical piece of weatherstrip that seals between the door glass channel and the quarter window glass when the quarter window is closed. This weatherstrip will easily attach to the stainless steel channel that's connected to the door glass.
Steering Column To Floor Seal
p/n: 20-0785-36
This Steering Column To Floor Seal is designed from the original part for superior fitment and seal. Restores the cab to floor sealing against the outside elements. For Manual Steering models.
Axle Rebound Pad
p/n: 20-0647-32
Bumper, rear axle. Two (2) required per Truck. 1965-72: F100, F350 2 W/D (wheel drive), F100, F250 4 W/D (wheel drive).
Window Felt Beltline Weatherstrips - 3ft Pair
p/n: 30-0244-57
This side window Window Felt Beltline Weatherstrip pair can be used as inner and/or outer. The weatherstrip is flexible, pile lined, rubber covered, with black bead. Available in 3ft pairs.
Heat and Sound Insulator Underlayment Set
p/n: 70-4671-88
This four (4) piece die-cut Heat and Sound Insulator Underlayment Set lays under the carpet. This insulator underlayment will decrease road noise and decrease heat inside the interior compartment. Pre-cut and ready to be installed into your vehicle to improve driving comfort.
Side Window Vertical Leading Edge
p/n: 20-2843-80
This Side Window Weatherstrip pair is the vertical piece of weatherstrip that seals between the door glass channel and the quarter window glass when the quarter window is closed. This weatherstrip will easily attach to the stainless steel channel that's connected to the door glass.
Vent Window Division Post Seal
p/n: 70-3870-56
This Vent Window Division Post Seal is fully molded with metal core and attaching tabs.
Radiator Mounting Insulator Pads
p/n: 70-2238-31
A four (4) piece set of Radiator Mounting Insulator Pads. For use on all four corners of the radiator. For vehicle models with three (3) wide core radiators.
Trunk Weatherstrip
p/n: 70-1438-85
This Trunk Weatherstrip is designed from the original part for superior fitment and seal. The weatherstrip mounts around the full perimeter of the trunk directly to the body.
Body Bumper Kit
p/n: 90-0211-90
This fourteen (14) piece Body Bumper Kit is designed from the original part for superior fitment, finish and function. Designed from originals and made from top quality rubber to ensure durability.
U Jamb Lock Pillar Filler
p/n: 82-0075-79
This U Jamb Lock Pillar Filler seals the bottom of the rear side window, and may also be known as a door jamb seal. Fully molded authentic rubber construction with metal core.
U Jamb Lock Pillar Filler
p/n: 82-0064-79
This U Jamb Lock Pillar Filler seals the bottom of the rear side window, and may also be known as a door jamb seal.
Peel-N-Stick Trunk Weatherstrip
p/n: 70-0773-WT
This Peel-N-Stick Trunk Weatherstrip is designed from the original part for superior fitment and seal. The weatherstrip mounts around the full perimeter of the trunk directly to the body.
Voltage Regulator Cover Shield
p/n: 70-4531-17
This Voltage Regulator Cover Shield is designed from the original part for superior fitment and function. This cover shield is located over and above the voltage regulator.
Body to Frame Isolator Mounting Pads
p/n: 70-3343-48
This two (2) piece Body to Frame Isolator Mounting Pad set is designed from the original part for superior fitment and seal. Pieces are made of fully molded EPDM rubber. Two (2) sets required per car.
Windshield Frame Upper (Header) Weatherstrip
p/n: 70-4476-52
This Windshield Frame Upper (Header) Weatherstrip is designed from the original part for superior fitment and sealing. This windshield frame upper weatherstrips mounts to seal between the windshield frame and hardtop of the vehicle. Made of a high-quality EPDM rubber as the original.
Steering Column At Floor Seal
p/n: 20-1072-36
This Steering Column At Floor Seal is designed from the original part for superior fitment and sealing. This part fits around the steering column to seal the column at the body floor pan.
Side Window Vertical Leading Edge
p/n: 70-1556-80
This quarter to side window Vertical Leading Edge Weatherstrip pair is designed from the original part for superior fitment and seal. This part attaches to the vertical edge of the rear side windows when the rear side windows are fully raised.
Taillight Lens Gaskets
p/n: 70-3989-15
This Taillight Lens Gasket pair is designed from the original part for superior fitment and seal. These reproduction gaskets fit between taillight lens & taillight housing.
Convertible Top Decklid Weatherstrip
p/n: 70-3950-67
This Convertible Top Decklid Weatherstrip is designed from the original part for a superior fitment and seal. This rubber seal mounts around the full perimeter of the soft top storage compartment.
Suspension Bushing
p/n: 70-3345-35
Bushing, rear shackle to body insulating mounts, upper. This is a four (4) piece set. Replaces OEM # 397225
Peel-N-Stick Trunk Weatherstrip
p/n: 70-0774-WT
This Peel-N-Stick Trunk Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body. Easy to install 3M Peel-N-Stick backing provides superior adhesion for reliable performance.
Spring Shackle Bushing Set
p/n: 20-0867-32
This Spring Shackle Bushing Set is for one (1) front of the rear leaf spring. Designed from original parts for a precise, factory fit.
Hood to Cowl Weatherstrip
p/n: 20-0216-43
This Hood to Cowl Weatherstrip is designed from the original part for superior fitment and seal. An exact reproduction of the original Ford part using dense rubber with pre-installed fastener clips.
Fastback Rear Window Louver Gaskets
p/n: 20-2857-83
A six (6) piece Fastback Rear Window Louver Gasket set designed from the original part for superior fitment and function. These gaskets or pads serve to protect the paint when installing the rear window louvers.
Side Window Vertical Leading Edge
p/n: 82-0019-80
This Side Window Vertical Leading Edge Weatherstrip pair is designed from the original part for superior fitment and seal. This part attaches to the vertical edge of the rear side windows when the rear side windows are fully raised.
Upper Door - Roof Rail Weatherstrips
p/n: 70-2436-73
This Upper Door - Roof Rail Weatherstrip pair is made of high-quality EPDM rubber with vulcanized corners for a factory like fit. These upper, left and right door weatherstrips seal the door window frame to the hardtop and to the windshield frame.
U Jamb Door Lock Pillar Filler
p/n: 82-0018-79
This U Jamb Lock Pillar Filler pair is designed from the original part for superior fitment, finish and function. This filler pair mounts on the body to seal the bottom of the rear side window. May also be known as a door jamb seal.
Vertical Leading Edge Weatherstrips
p/n: 83-1013-80
This Vertical Leading Edge Weatherstrip pair is designed from the original part for superior fitment and seal. This part attaches to the vertical edge of the rear side windows when the rear side windows are fully raised.
Splash Apron / A-Arm Dust Shield Filler
p/n: 70-3690-45
This two (2) piece Splash Apron / A-Arm Dust Shield Filler pair is designed from the original part for superior fitment and seal. Filler pieces are die cut from quality masticated rubber to authentic original dimensions. Left and Right pieces fit over suspension a-arms and inside front inner fenders.
Transmission Mount
p/n: 20-0602-11
This Transmission Mount, rear engine mount, is made to original specifications for an authentic fit and appearance. Used for manual or automatic transmissions.
Torsion bar bushing
p/n: 20-0667-36
Bushing, front axle pivot. Two (2) required per Truck. Twin I Beam suspension.
Spring Shackle and Bushing Set
p/n: 20-2731-32
This Spring Shackle and Bushing Set is for the rear of the rear leaf spring. Designed from original parts for a precise, factory fit. Two (2) sets required per car.