Brown Handbrake Floorplate
p/n: 40-0110-89
Floorplate, handbrake. Brown rubber. Steel core as original.
Brown Handbrake Floorplate
p/n: 40-0109-89
Floorplate, handbrake. Brown rubber. For black see our #40-0109-24. Brass core, made flat, to be bent as required.Color:brown Length: 7.
Brown Starter Button Cover
p/n: 40-0419-89
Pad, starter button. Made with brown rubber like original.
Brown Steering Column Grommet
p/n: 40-0144-89
Grommet, steering column to toe board. Brown rubber. For black see our #40-0144-36. Two and three fourths (2-3/4) inch by seven and one half (7-1/2) inch.
Brown Steering Column Grommet
p/n: 40-0078-89
Grommet, steering column to toe board. Brown rubber. For black see our #40-0078-36.Color:brown Length: 5.375 inches.
Bumper Grommet
p/n: 40-0048-30
Grommets, bumper. Some front and some rear, right and left. Fully molded rubber.
Bumper Grommet
p/n: 40-0047-30
Grommets, front or rear bumpers, right and left. Two (2) pair used per car if needing both front and rear bumper grommets. Fully molded rubber.
Carpet Heel Plate
p/n: 40-0087-88
Heel pad for carpet. Identical to original. Five and three fourths (5-3/4) inch by ten and one half (10-1/2) inch, to be stitched in place.Length: 10.
Chrome Fender Welting - 25ft
p/n: 70-1101-44
Welting, fender, bright chrome vinyl, three sixteenths (3/16) inch bead, one and one half (1-1/2) inch width. Superior quality. Twenty five (25) foot roll. Typically used to attach two (2) fenders to body. For fifty (50) foot roll see our #70-1102-44.
Chrome Fender Welting - 50ft
p/n: 70-1102-44
Welting, fender, bright chrome vinyl, three sixteenths (3/16) inch bead, one and one half (1-1/2) inch width. Superior quality. Fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty five (25) foot roll see #70-1101-44.
Clutch and Brake Pedal Pads - Black
p/n: 40-0107-22
This reproduction Clutch and Brake Pedal Pad pair slips over the full perimeter of the brake pedal for a precise, factory fit. An oval style perfect reproduction to replace worn original pedal pads. Manufactured in Black rubber.
Coil wire sleeve
p/n: 40-0336-21
Nipple, sparkplug wire at sparkplug, for right angle plug terminal. This is an exact copy of the style used at the time. Not a modernistic makeover.
Control Arm Bumper
p/n: 40-0465-32
Bumper, upper control arm. One (1) pair per car.Height: 1.375 inches.
Convertible A-Pillar Post Weatherstrips
p/n: 70-4336-63
This Convertible A-Pillar Post Weatherstrip pair is designed from the original part for superior fitment and sealing. These windshield post weatherstrips attach to the body to seal between the A-pillar post and the front section of the door or vent window frame when the door is closed.
Convertible A-Pillar Weatherstrips
p/n: 70-1508-63
This Convertible Hinge Pillar Post Weatherstrip pair attaches to the body and seals between the A-pillar post and the front section of the door or vent window frame when the door is closed. Replaces factory #2901040 and #2901041.
Convertible Roof Rail Weatherstrip
p/n: 70-1928-65
This Convertible Roof Rail Weatherstrip fits on the folding roof of the vehicle and seals the side window when the window is fully raised.
Convertible Roof Rail Weatherstrip
p/n: 70-1277-65
This Convertible Roof Rail Weatherstrip fits on the folding roof of the vehicle and seals the side window when the window is fully raised. Correct profile of original. Sold in complete sets only.
Convertible Roof Rail Weatherstrip
p/n: 70-2413-65
This Convertible Roof Rail Weatherstrip fits on the folding roof of the vehicle and seals the side window when the window is fully raised. Excellent quality and workmanship. Includes metal retainers as well.
Convertible Roof Rail Weatherstrip Set
p/n: 70-2996-65
This Convertible Roof Rail Weatherstrip Set fits on the folding roof of the vehicle and seals the side window when the window is fully raised.
Convertible Roof Rail Weatherstrip Set
p/n: 70-1420-65
This Convertible Roof Rail Weatherstrip fits on the folding roof of the vehicle and seals the side window when the window is fully raised.
Convertible Roof Rail Weatherstrip Set
p/n: 70-1645-65
This Convertible Roof Rail Weatherstrip Set fits on the folding roof of the vehicle and seals the side window when the window is fully raised. Includes front bow.
Convertible Roof Rail Weatherstrip Set
p/n: 70-4338-65
This eight (8) piece reproduction Convertible Roof Rail Weatherstrip Set is designed from the original part. These high-quality rubber weatherstrips fit on the roof of the vehicle and work to seal the side windows when the window is fully raised. Set includes both front header bow weatherstrips.
Convertible Roof Rail Weatherstrip Set
p/n: 70-2804-65
This seven (7) piece reproduction Convertible Roof Rail Weatherstrip Set is designed from the original part. These high-quality rubber weatherstrips fit on the roof of the vehicle and work to seal the side windows when the window is fully raised. Set includes the front header bow weatherstrip.
Convertible Roof Rail Weatherstrip Set
p/n: 70-3105-65
This Convertible Roof Rail Weatherstrip Set fits on the folding roof of the vehicle and seals the side window when the window is fully raised.
Convertible Top Front Bow Weatherstrip
p/n: 30-0503-65
This Convertible Top Front Bow Weatherstrip is designed from the original part for superior fitment and seal. This seal installs directly to the convertible top to seal between the soft top and the top of the windshield.
Cowl Drain Gutter Hose Grommet
p/n: 40-0202-54
Grommet, cowl drain. One and seven sixteenths (1-7/16) inch outside diameter for seven sixteenths (7/16) inch drain hose through firewall.
Cowl Vent Gasket
p/n: 40-0271-54
Gasket, cowl vent. Fully molded to original cross-section and outline.Length: 18.0 inches.
Cowl Vent Gasket
p/n: 40-0225-54
This Cowl Vent Gasket is designed from the original part for superior fitment and seal. Installs for a like factory fit and finish.
Cowl Vent Gaskets
p/n: 40-0170-54
This Cowl Vent Gasket is manufactured from high quality EPDM sponge rubber. For twin cowl vents of thirty four (34") inch circumference.
Decklid Lock Bumper
p/n: 40-0361-85
This Decklid Lock Bumper is fully molded and designed from the original part for superior fitment and seal. This bumper is made from high-quality EPDM dense rubber to provide excellent durability.
Dimmer Switch Grommet
p/n: 40-0083-88
This Dimmer Switch Grommet is used during carpet installations in automotive restorations. Made from high-quality EPDM dense rubber to provide excellent durability. Includes a wide flange for floor dimmer switch fitments.
Door - Gravel Shield - Running Board Weatherstrip
p/n: 60-0054-73
This Door - Gravel Shield - Running Board Weatherstrip is a anti-squeak bulb type extrusion with fitment for General Motors vehicles. A twelve (12) foot strip made of high-quality EPDM dense rubber and designed from original parts for superior fitment, finish and function.
Door and Trunk Handle Gasket
p/n: 40-0132-70
Pad, door handle escutcheon. Two and five sixteenths (2-5/16) inch by one and seven sixteenths (1-7/16) inch.
Door Bottom Weatherstrips
p/n: 40-0538-73
This Door Bottom Weatherstrip pair is designed from the original part for superior fitment and seal. Held to door by steel strip. Sponge type rubber as original. For four (4) door models.
Door Bottom Weatherstrips
p/n: 40-0537-73
This Door Bottom Weatherstrip pair is designed from the original part for superior fitment and seal. Held to door by steel strip. Sponge type rubber as original. For two (2) door models.
Door Bumper
p/n: 40-0037-70
Pad, door jamb. One and nine sixteenths (1-9/16) inch long by one and one eighth (1-1/8) inch wide.Length: 1.625 inches. Width: 1.0625 inches.
Door Bumper
p/n: 70-2045-71
This Door to Body Bumper is quality reproduction of the original factory part. Use varies depending upon model and body type. Some models uses four (4) bumpers for front doors and four (4) for rear doors.
Door Bumper
p/n: 40-0131-70
Bumper, door side. Approximate size one half (1/2) inch by three fourth (3/4) inch by two (2) inch. Length: 2.0 inches. Width: .50 inches.
Door Bumper
p/n: 40-0262-70
Bumper, door.Chrysler 1934 Bumper, door. Chrysler 1932-34 Bumper, decklid. Two (2) required per car. Length: 2.50 inches. Width: 1.8125 inches.
Door Bumper
p/n: 40-0235-70
Bumper, door striker plate. Two (2) per door, front and rear.Length: 1.375 inches. Width: .50 inches.
Door Bumper
p/n: 70-2292-70
Steele Rubber Products has the best quality door bumpers for your Street Rod or Custom Build project. Excellent for use in many applications.
Door Bumper
p/n: 40-0010-70
Pad, door jamb, fully detailed. One and one eighth (1-1/8) inch long, one and one fourth (1-1/4) inch wide.Length: 1.125 inches. Width: 1.25 inches.
Door Bumper
p/n: 40-0154-70
Bumper, door side. One and one fourth (1-1/4) inch long by one (1) inch wide. Similar to our #40-0010-70, but different workface.Length: 1.0 inches.
Door Check Strap
p/n: 40-0535-70
Strap, door check. T-type, special heavy duty construction of rubber with multiple ply webbing and molded-in steel crossbar. Full length as original with one eighth (1/8) inch by seven eighths (7/8) inch steel crossbar.
Door End Cap Filler
p/n: 70-1620-73
This Door End Cap Filler pair is designed from the original part for superior fitment and seal. Pre-drilled holes for easy installation. These premium seals have a corrosion resistant brass metal core.
Door End Cap Fillers
p/n: 70-4673-73
This Door End Cap Filler pair manufactured with soft, yet durable, closed-cell EPDM sponge rubber with galvanized steel cores. Designed from the original part for superior fitment, finish and function.
Door End Cap Fillers
p/n: 82-0208-73
This Door End Cap Filler pair is designed from the original part for superior fitment and sealing. Fully molded with metal core just like original.
Door Handle Gasket
p/n: 40-0133-70
Pad, door handle escutcheon. Two and three fourths (2-3/4) inch by one and one fourth (1-1/4) inch.Width: 2.75 inches. Height: 1.25 inches.
Door handle gasket
p/n: 70-2628-69
Gasket set, door handle. Machine die cut to original profile. Each set is enough for two doors.
Door handle gasket
p/n: 40-0191-70
Pad, outside door handle escutcheon. Compare with our #40-0207-70.
Door Jamb Bumper Pad
p/n: 40-0042-70
This Door Jamb Bumper Pad is designed from the original part for superior fitment and seal. A reproduction of earlier type, screw retained and a perfect copy.
Door opening step grommet
p/n: 40-0125-49
Grommet, door sill mat retainer at lower door opening. All sill plates with metal stud retainer. (Included in our #40-0542-49 set).
Door opening step pad
p/n: 40-0389-49
Mats, door sill opening, on body. Made without metal core (copied from authentic rubber only original). Molded-in carrot retainers.
Door opening step pad
p/n: 70-2623-49
Mat, door opening, on body. Rear doors. For front doors see our #70-2622-49. Excellent craftsmanship with authentic metal core with studs like original.
Door opening step pad
p/n: 70-2622-49
Mat, door opening, on body. Front doors. For rear doors see our #70-2623-49. Excellent craftsmanship with authentic metal core with studs like original.
Door Opening Threshold Pad
p/n: 70-2517-49
Mat pair for door sill threshold opening, on body. Made with authentic appearance and constructed of long lasting rubber like original. Perfect replica of factory #1433321, however it should work fine as a replacement of #1497247, 1433281, and 1803065.
Door Plug Beltline Extender
p/n: 70-3214-62
This Door Plug Beltline Extender pair is designed from the original part for superior fitment and seal. This piece works on beltline as an extender. Width: 2.0 inches.
Door Vent Window Weatherstrips
p/n: 70-4697-55
This Front Door Vent Window Weatherstrip pair is designed from the original parts for superior fitment and seal. A two (2) piece pair that fits both driver (Left) and passenger (Right) front doors of the vent / wing window assemblies.
Door Weatherstrip
p/n: 70-1615-72
This front door weatherstrip pair are designed from the original parts for superior fitment and seal. This part is the primary door to body weatherstrip. The pair includes both end cap fillers.
Door Weatherstrip
p/n: 40-0487-73
This Door Weatherstrip is made of a high-quality dense rubber. The weatherstrips is commonly used as a bottom door weatherstrip but can be for a variety of uses. Available by the foot.
Door Weatherstrip
p/n: 70-1832-72
Door edge weatherstrip with molded ends. This part is the primary door to body weatherstrip. Includes clips for easy installation. Made of top quality rubber.
Door Weatherstrip
p/n: 70-1292-73
This Door Weatherstrip is used on the bottom of the door opening. Available by the foot.
Door Weatherstrip
p/n: 70-1863-72
Door edge weatherstrip. This part is the primary door to body weatherstrip. Includes attached end cap fillers.
Door Weatherstrip
p/n: 70-1448-73
This Door Weatherstrip for the door sill is made of an extruded dense rubber. Available by the foot.
Door weatherstrip
p/n: 70-2291-72
Door edge weatherstrip. This part is the primary door to body weatherstrip. Includes attached end cap fillers.
Door Weatherstrip
p/n: 70-1683-72
Door edge weatherstrip. This part is the primary door to body weatherstrip. Note: order #70-1684-73 end cap fillers separately.
Door Weatherstrip
p/n: 40-0367-57
Door belt inner weatherstrip (scraper seal). Front door only. Thirty six (36) inches long.
Door Weatherstrip End Cap
p/n: 70-1684-73
Seal or End cap, door weatherstrip end. Fully molded with original type metal core. See our #70-1683-72 for main weatherstrip.Width: 4.25 inches.
Door Weatherstrip End Cap
p/n: 82-0183-73
Weatherstrip, door seal end cap or filler. Fully molded. Order #82-0184-72 for perimeter weatherstrip separately.Width: 3.75 inches.
Door Weatherstrip End Cap Fillers
p/n: 70-2592-73
This Door Weatherstrip End Cap Filler pair is designed from the original part for an authentic fit, finish, and appearance. Fully original molded type with metal core.
Door Weatherstrip End Caps
p/n: 70-2053-79
This Door Weatherstrip End Caps filler pair is designed from the original part for superior fitment and seal. Fully molded with metal core.
Door Weatherstrip End Caps
p/n: 70-3149-73
End cap, front door weatherstrip cover. Fully molded with with metal core just like the original. Width: 4.0 inches.
Door Weatherstrips
p/n: 40-0488-73
This Door Weatherstrip pair is designed from the original part for superior fitment and seal. These primary door weatherstrips mount (glue-on) directly to the left and right front doors sealing the full perimeter of the doors against the vehicle body when the door is closed.
Engine Mount Service - Revulcanization Only
p/n: 40-0411-11
This Engine Mount Revulcanization Service Only is designed to restore your original rear upper engine support insulators to a like new condition. The Revulcanization Service requires your original cores.
Engine Mount Service – Revulcanization Only
p/n: 40-0428-11
This Revulcanization Service Only is designed to restore your Rear Engine Support Mount to a like new original condition. Service requires your metal core. Please call or email for more service details and ordering.
Engine Mount Service – Revulcanization Only
p/n: 70-2666-11
This Revulcanization Service Only is designed to restore your Front Engine Support Mount to a like new original condition. Service requires your metal core. Please call or email for more service details and ordering.
Engine Mount Service – Revulcanization Only
p/n: 40-0410-11
This Revulcanization Service Only is designed to restore your Front Engine Support Mount to a like new original condition. Service requires your metal core. Please call or email for more service details and ordering.
Engine Top Cover Weatherstrip
p/n: 70-4750-88
This Engine Top Cover Gasket is an original design reproduction made from top quality sponge rubber. This gasket attaches between the removable engine cover ("doghouse") and the vehicle firewall / floorboard.
Exhaust Support Grommet
p/n: 60-0031-13
This Exhaust Support Grommet is designed from the original part for superior fitment and usage. The OEM direct fit application is as a rear and middle muffler exhaust support hanger.
Fender Skirt Edge Weatherstrip
p/n: 40-0279-44
This Fender Skirt Edge Weatherstrip pair is designed from the original part for superior fitment, finish, and seal. This weatherstrips fits between the rear wheel fender skirt and the rear fender quarter panel.
Fender Skirt Edge Weatherstrip
p/n: 40-0476-44
This Fender Skirt Edge Weatherstrip pair is designed from the original part for superior fitment, finish, and seal. This weatherstrips fits between the rear wheel fender skirt and the rear fender quarter panel.
Fender Welting 1/4" Bead - 25ft
p/n: 70-1097-44
Welting, fender. Superior quality, proper construction of reinforced vinyl over vinyl core, one and three eighths (1-3/8) inch wide, black only. One fourth (1/4) inch bead, twenty-five (25) foot roll. Typically used to attach two (2) fenders to body.
Fender Welting 1/4" Bead - 50ft
p/n: 70-1098-44
Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide. One fourth (1/4) inch bead, fifty (50) foot roll. Typically used to attach four (4) fenders to body.
Fender Welting with 3/16 Bead - 25ft
p/n: 70-1099-44
A superior quality Fender Welting material constructed of reinforced black vinyl over a vinyl core. Typically used for attaching two (2) fenders to body. Sold in a 25 foot roll.
Fender Welting with 3/16" Bead - 50ft
p/n: 70-1100-44
A superior quality Fender Welting material constructed of reinforced black vinyl over a vinyl core. Typically used for attaching four (4) fenders to body. Sold in a 50 foot roll.
Firewall Grommet
p/n: 40-0223-21
This Firewall Grommet can be used for a variety of applications since the grommet is plain (no holes). Designed from the original part for superior fit and seal.
Firewall Grommet
p/n: 40-0221-21
This Firewall Grommet is used to run the speedometer cable, oil tube, and the temperature tube through the firewall. The three (3) holes measure 5/16", 1/4", 3/16".
Firewall Grommet
p/n: 40-0222-21
This Firewall Grommet is used to run the throttle cable and wiper vacuum line through the firewall as well as a drain hole for the cowl vent. The holes in the three (3) hole design measure: 9/16", 3/8", and 1/4".
Fixed quarter window gasket
p/n: 70-3559-77
Weatherstrip, rear stationary quarter window. Made with proper extruded cross sections and molded corner sections just like original.
Flexible Run Channel - 30 Inch Pair
p/n: 40-0309-57
Channel, side window glass, vertical run. Flexible, felt lined, rubber covered channel. Available in 30" pair.
Front and Rear Door Bumper
p/n: 34-0025-42
High quality steel core Front and Rear Door Bumper for front and rear body hinge pillar. Mounted by screw. For auxiliary use only where needed to prevent door rattles. Replaces factory #372341.
Front Bow Weatherstrip
p/n: 70-2658-65
Weatherstrip, windshield header to front bow. Authentic reproduction made from durable sponge rubber with molded ends fits in channel.Length: 52.0 inches.
Front Bow Weatherstrip
p/n: 40-0418-65
This Front Bow Weatherstrip is designed from the original part for superior fitment and seal. Top quality extrusion cut five (5') feet long.
Front Bow Weatherstrip
p/n: 70-2296-64
Weatherstrip, windshield header bow to convertible top. Fully molded, exact original profile configuration with attached molded ends.