Need Assistance?

We are here to help.

Call 800-447-0849

635 items found matching Plymouth
Accelerator Rod Seal

p/n: 40-0205-88

This Accelerator Rod Seal is used as an accelerator rod through the toeboard. Molded from a high-quality EPDM dense rubber.

$45.79/ea.
Made to Order Takes 5-7 Days
Side Mount Grommet

p/n: 40-0140-37

Grommet, sidemount carrier brace to fender. One and five sixteenths (1-15/16) inch outside diameter by one half (1/2) inch inside diameter.

$45.19/ea.
In Stock
Door Plug Beltline Extender

p/n: 70-3214-62

This Door Plug Beltline Extender pair is designed from the original part for superior fitment and seal. This piece works on beltline as an extender. Width: 2.0 inches.

$44.69/pr.
In Stock
Taillight Mounting Pad

p/n: 40-0299-15

Mounting pad, taillight bracket to fender. This is a plain, flat un-beaded pad as original, and reversible. Four and three fourths (4-3/4) inch long.

$44.39/pr.
Made to Order Takes 5-7 Days
Side mount grommet

p/n: 40-0382-37

Grommet or cover, support arm to body brace (side mount spare).

$43.69/ea.
Made to Order Takes 5-7 Days
Firewall Grommet

p/n: 40-0222-21

This Firewall Grommet is used to run the throttle cable and wiper vacuum line through the firewall as well as a drain hole for the cowl vent. The holes in the three (3) hole design measure: 9/16", 3/8", and 1/4".

$43.69/ea.
Made to Order Takes 5-7 Days
Brake and Clutch Shank Seal

p/n: 40-0016-24

Seal, brake and clutch pedal shank to floorboard (draft excluder).Length: 2.4375 inches. Width: 1.875 inches.

$43.69/pr.
In Stock
Fuel Filler Neck Grommet

p/n: 70-3622-39

This Fuel Filler Neck Grommet is designed from the original part for superior fitment and seal. This grommet fits around the vehicles fuel filler neck between the filler neck and vehicle body.

$43.69/ea.
In Stock
Firewall Grommet

p/n: 40-0221-21

This Firewall Grommet is used to run the speedometer cable, oil tube, and the temperature tube through the firewall. The three (3) holes measure 5/16", 1/4", 3/16".

$42.59/ea.
Made to Order Takes 5-7 Days
Trunk Weatherstrip

p/n: 70-3052-84

This Trunk Weatherstrip is designed from the original part for superior fitment and seal. The weatherstrip mounts around the full perimeter of the trunk directly to the body.

$41.29/ea.
In Stock
Engine Top Cover Weatherstrip

p/n: 70-4750-88

This Engine Top Cover Gasket is an original design reproduction made from top quality sponge rubber. This gasket attaches between the removable engine cover ("doghouse") and the vehicle firewall / floorboard.

$41.29/ea.
In Stock
Window Gasket Locking Strip - Chrome

p/n: 70-1919-52

This chrome appearing Window Gasket Locking Strip is designed from the original part for superior fitment and seal. Locking strip serves as the front or rear window gasket retainer. Sixteen (16') foot length single piece, one application, for complete coverage.

$41.29/ea.
In Stock
Side mount grommet

p/n: 40-0097-37

Grommet, sidemount clamp.

$40.79/ea.
Made to Order Takes 5-7 Days
Door handle gasket

p/n: 40-0416-70

Gasket set, outer door handle.

$40.69/pr.
Made to Order Takes 5-7 Days
Fuel Neck Grommet

p/n: 70-2284-41

This Fuel Filler Neck Grommet is designed from the original part for superior fitment and seal. This grommet fits around the vehicles fuel filler neck between the filler neck and vehicle body. Fully molded out of gasoline resistant BUNA high quality rubber.

$40.29/ea.
In Stock
Firewall Grommet

p/n: 40-0223-21

This Firewall Grommet can be used for a variety of applications since the grommet is plain (no holes). Designed from the original part for superior fit and seal.

$38.79/ea.
Made to Order Takes 5-7 Days
Starter rod boot

p/n: 40-0472-89

Seal, starter through floorboard.

$37.19/ea.
Made to Order Takes 5-7 Days
Door Handle Gasket

p/n: 40-0207-70

Pad, door handle escutcheon. Elliptical in shape.

$36.99/pr.
In Stock
Door handle gasket

p/n: 40-0191-70

Pad, outside door handle escutcheon. Compare with our #40-0207-70.

$36.99/pr.
Made to Order Takes 5-7 Days
1-7/16" Firewall Grommet

p/n: 40-0204-21

This Firewall Grommet is used to run the wiring harness through the firewall. Designed from the original part for superior fit and seal.

$36.89/ea.
In Stock
Windshield Division Bar Gasket

p/n: 70-0098-52

This Windshield Division Bar Gasket is designed from the original part for superior fitment and seal. Part combines inner and outer gasket in one piece as original. For seventeen (17") inch to (20") inch lengths.

$36.79/ea.
In Stock
Taillight Mounting Pad

p/n: 40-0092-15

Pad, taillight mounting, plain type without bead. Compare with our #40-0299-15. Length: 4.3125 inches. Width: 2.25 inches.

$34.99/ea.
Made to Order Takes 5-7 Days
Window Locking Strip - Black

p/n: 70-2195-52

This extruded Locking Strip is used to retain windshield gaskets in pickups and vans. Designed from the original part for superior fitment, finish and function. Available in 16ft lengths.

$34.99/ea.
In Stock
Brake and Clutch Pedal Pad

p/n: 40-0287-22

Pads, brake and clutch pedal. Length: 3.625 inches. Width: 2.0 inches.

$34.99/ea.
In Stock
Taillight Mounting Pad

p/n: 40-0061-15

Pad, taillight mounting. Chrysler 1932-33 Pad, taillight mounting. Chrysler and other WPC cars. Chrysler 1932-33 Pad, rumble seat step mounting.

$34.79/ea.
In Stock
Hood to Fender Bumper

p/n: 70-2046-42

This Hood to Fender Bumper pair is a quality reproduction of the original factory part. These rubber bumpers attach to the front fender to support / cushion the hood closure.

$33.49/pr.
In Stock
Cowl Drain Gutter Hose Grommet

p/n: 40-0202-54

Grommet, cowl drain. One and seven sixteenths (1-7/16) inch outside diameter for seven sixteenths (7/16) inch drain hose through firewall.

$32.69/ea.
Made to Order Takes 5-7 Days
Splash Apron / A-Arm Dust Shield Filler Set

p/n: 70-4670-45

This four (4) piece Splash Apron / A-Arm Dust Shield Filler set is designed from the original part for superior fitment and seal. Filler pieces are die-cut from quality masticated rubber to authentic original dimensions. Left and Right pieces fit over suspension a-arms and inside front inner fenders.

$32.49/set
Allow 2-4 Weeks Ships Separately
1-1/8" Hood Bumper

p/n: 33-0115-42

Bumper, hood, rubber only.

$31.49/pr.
In Stock
Door handle gasket

p/n: 70-2628-69

Gasket set, door handle. Machine die cut to original profile. Each set is enough for two doors.

$30.99/set
Made to Order Takes 5-7 Days
Vent Window Division Bar Weatherstrip

p/n: 70-1432-56

This Front Vent Window Division Bar Weatherstrip is designed from the original part for superior fitment and seal. A single 32" inch (approximate) length of original cross-section extruded rubber.

$30.89/ea.
In Stock
Window Locking Strip - Black

p/n: 70-1918-52

This Window Locking Strip is designed from the original part for superior fitment and function. Front or rear window retainer made from top quality black EPDM rubber. Available in 15ft lengths.

$30.29/ea.
In Stock
Door Bumper

p/n: 40-0131-70

Bumper, door side. Approximate size one half (1/2) inch by three fourth (3/4) inch by two (2) inch. Length: 2.0 inches. Width: .50 inches.

$29.89/ea.
In Stock
Steering Column Cushion

p/n: 40-0259-36

Pad, steering post bracket. One (1) per car. Cushions steering post clamp to instrument panel.Length: 3.50 inches.

$29.39/ea.
Made to Order Takes 5-7 Days
Inner Fender Splash / Dust Shield Set

p/n: 70-4669-45

This four (4) piece Inner Fender Splash / Dust Shield Set is designed from the original part for superior fitment and seal. Inner Fender pieces are die-cut from quality masticated rubber to authentic original dimensions. These pieces fit to the inner front fenders.

$29.19/set
Allow 2-4 Weeks Ships Separately
Trunk Bumper

p/n: 70-1659-87

Bumper, trunk lid.Length: 1.50 inches. Width: 1.0 inches.

$28.79/ea.
In Stock
Battery Clamp Cover

p/n: 70-0095-21

This Battery Clamp Cover helps to protect the nearby metal and finish. Fully molded from high-quality EPDM rubber to ensure durability. Good copy from an original part.

$27.89/ea.
In Stock
Hood Support Rod Top Cap

p/n: 40-0346-42

Pad, hood rest rod. For five sixteenths (5/16) inch diameter hood support rod. Also see our #40-0103-42.Length: 1.0 inches.

$26.89/ea.
In Stock
Body Mounting Pad

p/n: 40-0232-48

Pad, body mounting, upper. Fully molded rubber with locating collar. As many as twelve (12) used per car. One and fifteen sixteenths inch (1 15/16") outside width by two inch (2") outside width. See drawing for more dimensions.

$26.49/ea.
In Stock
Body Mounting Pad

p/n: 40-0453-48

Insulator, body mounting. Fully molded rubber with locating collar. Use as required. Up to eight (8) are used per car.

$25.99/ea.
In Stock
Steering gear bushing

p/n: 40-0130-36

Bushing, insulator, for steering gear arm. Four (4) required per car.

$25.39/ea.
In Stock
Fuel Filler Neck Grommet

p/n: 70-2580-39

This Fuel Filler Neck Grommet is designed from the original part for superior fitment and seal. This grommet fits around the vehicles fuel filler neck between the filler neck and vehicle body.

$24.99/ea.
In Stock
Door Bumper

p/n: 40-0235-70

Bumper, door striker plate. Two (2) per door, front and rear.Length: 1.375 inches. Width: .50 inches.

$24.79/pr.
In Stock
Exhaust Support Grommet

p/n: 60-0031-13

This Exhaust Support Grommet is designed from the original part for superior fitment and usage. The OEM direct fit application is as a rear and middle muffler exhaust support hanger.

$24.59/ea.
In Stock
Quarter Window Vertical Leading Edge

p/n: 83-1012-80

This quarter and side window Vertical Leading Edge Weatherstrip pair is designed from the original part for superior fitment and seal. A reproduction weatherstrip manufactured to OEM specifications to install for an authentic fit and finish.

$23.79/pr.
In Stock
Coil wire sleeve

p/n: 40-0336-21

Nipple, sparkplug wire at sparkplug, for right angle plug terminal. This is an exact copy of the style used at the time. Not a modernistic makeover.

$23.49/ea.
In Stock
Hood Bumper

p/n: 82-0212-42

Bumper, hood to fender ledge. Excellent reproduction, made just like original.

$22.99/pr.
In Stock
2-1/2" Black Bow Drill Cloth Tape

p/n: 70-1172-65

This Bow Drill Cloth Tape is used for covering convertible side window weatherstrip. Black in color and available in a five (5) foot roll.

$22.99/ea.
In Stock
Door Bumper

p/n: 40-0215-70

Bumper, door check link.

$22.39/ea.
In Stock
2-1/2" Tan Bow Drill Cloth Tape

p/n: 70-1173-65

This Bow Drill Cloth Tape is used for covering convertible side window weatherstrip. Tan in color and available in a five (5) foot roll.

$20.69/ea.
In Stock
Heater core tube grommet

p/n: 40-0444-88

Grommet, heater core tube to dash, lower.

$20.39/ea.
In Stock
Body Mounting Pad

p/n: 40-0233-48

Pad, body mounting, lower. Fully molded rubber.

$20.29/ea.
In Stock
Hood to Fender Bumper

p/n: 70-2043-42

This Hood to Fender Bumper pair is a quality reproduction of the original factory part. These rubber bumpers attach to the front fender to support / cushion the hood closure.

$19.99/pr.
In Stock
Door Bumper

p/n: 40-0037-70

Pad, door jamb. One and nine sixteenths (1-9/16) inch long by one and one eighth (1-1/8) inch wide.Length: 1.625 inches. Width: 1.0625 inches.

$18.49/ea.
In Stock
Body Mounting Pad

p/n: 40-0231-48

Pad, body mounting, upper. Fully molded rubber with locating collar. One and fifteen sixteenths inch (1 15/16") outside diameter by three fourths inch (3/4") locating collar outside diameter by one half inch (1/2") inside locating hole diameter.

$18.39/ea.
In Stock
Door Bumper

p/n: 70-2292-70

Steele Rubber Products has the best quality door bumpers for your Street Rod or Custom Build project. Excellent for use in many applications.

$17.99/ea.
In Stock
Body Mount Isolator Pad

p/n: 40-0234-48

This Body Mount Isolator Pad functions as a body to frame isolator mounting pad. Made of high quality EPDM rubber with a high level of fit and finish.

$17.79/ea.
In Stock
Body Mounting Pad

p/n: 40-0230-48

Pad, body mounting, lower. Fully molded rubber. One and eleven sixteenths inch (1 11/16") outside diameter by nine sixteenths inch (9/16") inside hole diameter by one half inch (1/2") height.

$16.79/ea.
In Stock
Dimmer Switch Grommet

p/n: 40-0083-88

This Dimmer Switch Grommet is used during carpet installations in automotive restorations. Made from high-quality EPDM dense rubber to provide excellent durability. Includes a wide flange for floor dimmer switch fitments.

$16.79/ea.
In Stock
Door and Trunk Handle Gasket

p/n: 40-0132-70

Pad, door handle escutcheon. Two and five sixteenths (2-5/16) inch by one and seven sixteenths (1-7/16) inch.

$16.59/ea.
In Stock
Door Handle Gasket

p/n: 40-0133-70

Pad, door handle escutcheon. Two and three fourths (2-3/4) inch by one and one fourth (1-1/4) inch.Width: 2.75 inches. Height: 1.25 inches.

$16.29/ea.
In Stock
Door Jamb Bumper Pad

p/n: 40-0042-70

This Door Jamb Bumper Pad is designed from the original part for superior fitment and seal. A reproduction of earlier type, screw retained and a perfect copy.

$16.19/ea.
In Stock
Hood to Fender Bumper

p/n: 60-0542-42

This Hood to Fender Bumper set is a quality reproduction of the original factory part. These rubber bumpers attach to the front fender to support / cushion the hood closure.

$15.99/set
In Stock
Door Bumper

p/n: 40-0010-70

Pad, door jamb, fully detailed. One and one eighth (1-1/8) inch long, one and one fourth (1-1/4) inch wide.Length: 1.125 inches. Width: 1.25 inches.

$15.99/ea.
In Stock
Battery Cable Grommet

p/n: 40-0333-21

Grommet, battery hot cable through frame. Three fourths (3/4) inch inside diameter for one and three sixteenths (1-3/16) inch hole through frame.

$15.49/ea.
In Stock
Body Mounting Pad

p/n: 40-0324-48

Cushion, used as either a body mounting pad or for all body bolt nuts, below brackets. Fully molded rubber. Two inch (2") outside diameter by one half inch (1/2") inside hole diameter by three eighths inch (3/8") height.

$14.99/ea.
In Stock
Door opening step grommet

p/n: 40-0125-49

Grommet, door sill mat retainer at lower door opening. All sill plates with metal stud retainer. (Included in our #40-0542-49 set).

$13.89/ea.
In Stock
Windshield Bumper

p/n: 40-0366-52

This Windshield Bumper is designed from the original part for superior fitment and seal. Two (2) per car.

$13.19/ea.
In Stock
Door Bumper

p/n: 40-0154-70

Bumper, door side. One and one fourth (1-1/4) inch long by one (1) inch wide. Similar to our #40-0010-70, but different workface.Length: 1.0 inches.

$13.19/ea.
In Stock
1-1/16" Spare Wheel Carrier Grommet

p/n: 32-0253-37

This Spare Wheel Carrier Grommet is fully molded and designed from the original part for superior fitment and seal. This grommet is made from high-quality EPDM dense rubber. Designed for spare wheel carrier mounting bracket.

$12.39/ea.
In Stock
1/8" x 7/8" Fabric Hood Lacing

p/n: 60-0578-42

This 1/8" x 7/8" Fabric Hood Lacing is high quality original style woven cotton hood to cowl lacing. This lacing has the slot to install a wire insert or fasten with rivets if so found originally. Available by the foot to accommodate any job.

$12.39/ft.
In Stock
7/8" Window Weatherstrip

p/n: 40-0054-99

This Window Weatherstrip is typically used on the rear window and rear fixed quarter window. Used on cars with chrome reveal molding where the reveal molding lays over the pinchweld seal. Available by the foot.

$12.39/ft.
In Stock
3/16" x 3/4" Fabric Hood Lacing

p/n: 70-2221-42

This 3/16" x 3/4" Fabric Hood Lacing is made of a high-quality original style woven cotton. Available by the foot to accommodate any job.

$12.39/ft.
In Stock
Front and Rear Door Bumper

p/n: 34-0025-42

High quality steel core Front and Rear Door Bumper for front and rear body hinge pillar. Mounted by screw. For auxiliary use only where needed to prevent door rattles. Replaces factory #372341.

$12.19/ea.
In Stock
1" Frame Hole Plug

p/n: 35-0166-44

Plug, for holes in right hand frame rail when car is left hand drive. (Frames were punched for both right hand and left hand drive).

$11.29/ea.
In Stock
Spring Shackle Bushing

p/n: 40-0183-32

Bushing, spring and shackle, front and rear leaf springs. Eight (8) or twelve (12) required per car.Length: 1.25 inches. Height: 1.25 inches.

$11.29/ea.
In Stock
29/32" Side Mount Grommet

p/n: 32-0364-37

This Side Mount Grommet is fully molded and designed from the original part for superior fitment and seal. This grommet is made from high-quality EPDM dense rubber to provide excellent durability. Designed for side tire carrier support arm bracket.

$11.19/ea.
In Stock
Rear Spring Thrust Washer

p/n: 40-0526-32

Thrust washer, rear spring. "Silent Block". Three sixteenths (3/16) inch thick. Seven eighths (7/8) inch by one and five eighths (1-5/8).

$10.39/ea.
In Stock
Masticated Rubber Sheet

p/n: 70-0645-45

This Masticated Rubber Sheet is three-thirty seconds (3/32") inch thick. The rubber sheet contains random milled cotton cord reinforcement for front end splash aprons and other project uses.

$10.39/sqf
In Stock
Trunk Decklid Bumpers

p/n: 70-2044-87

This Trunk Decklid Bumper pair is designed from the original part for superior fitment, finish and function. These rubber bumpers attach to the trunk decklid to support / cushion lid closure.

$10.39/pr.
In Stock
Rear Spring Thrust Washer

p/n: 40-0525-32

Thrust washer, rear spring. "Silent Block". Three sixteenths (3/16) inch thick. One (1) inch by one and three fourths (1-3/4) inch.

$9.99/ea.
In Stock
Glass rear stop bumper

p/n: 70-3624-62

Front door glass rear stop bumper.

$9.99/ea.
In Stock
Door Weatherstrip

p/n: 70-1448-73

This Door Weatherstrip for the door sill is made of an extruded dense rubber. Available by the foot.

$9.99/ft.
In Stock
Door Weatherstrip

p/n: 70-1292-73

This Door Weatherstrip is used on the bottom of the door opening. Available by the foot.

$9.99/ft.
In Stock
2-5/8" Run Channel Mohair Liner

p/n: 70-2863-58

This Run Channel Mohair Liner helps to reline the guide bars on the lock side of hardtops and convertibles. This mohair liner comes with a rubber backing and installs with adhesive to the division bars and channel. Available by the foot.

$9.99/ft.
In Stock
Hood Bumper

p/n: 70-1755-42

Bumper, hood to fender.Length: 1.0 inches. Width: .875 inches.

$9.99/ea.
In Stock
Side Roof Rail Weatherstrip

p/n: 70-0155-65

Weatherstrip, convertible roof rail. Available by the foot.

$9.99/ft.
In Stock
Glass up stop bumper

p/n: 70-3623-62

Front door glass up stop bumper. For models w/out power vent windows. Use two (2) or four (4) per vehicle. Refer to your vehicle to see how many are required.

$9.99/ea.
In Stock
Door Weatherstrip

p/n: 40-0487-73

This Door Weatherstrip is made of a high-quality dense rubber. The weatherstrips is commonly used as a bottom door weatherstrip but can be for a variety of uses. Available by the foot.

$9.79/ft.
In Stock
Trunk Weatherstrip

p/n: 40-0479-85

This Trunk Weatherstrip is made from high quality EPDM sponge rubber. Excellent for use on many different vehicle models. Available by the foot.

$9.79/ft.
In Stock
3/4" Window Weatherstrip

p/n: 40-0053-99

This Window Weatherstrip is used for rear window and rear fixed quarter windows. Available by the foot.

$9.79/ft.
In Stock
Hood to Cowl Weatherstrip

p/n: 40-0475-42

This Hood to Cowl Weatherstrip is designed from the original part for superior fitment and seal. The weatherstrip can also be used as a radiator seal. Available by the foot.

$9.79/ft.
In Stock
Peel-N-Stick Trunk Weatherstrip

p/n: 30-0356-WT

This trunk weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body. Easy to install 3M Peel-N-Stick backing provides superior adhesion for reliable performance.

$9.69/ft.
In Stock
Shock Absorber Arm Bushing

p/n: 60-0106-32

This Shock Absorber Arm Bushing is designed from the original part for superior fitment and function. Manufactured to OEM original standards.

$9.19/ea.
In Stock
11/16" Roof Rail Weatherstrip

p/n: 70-1171-99

This available by the foot Roof Rail Weatherstrip measures eleven sixteenths inches (11/16") in height. It fits into a metal channel retainer. Note: Order twelve feet (12') for two (2) door models and fourteen feet (14') for four (4) door models.

$9.19/ft.
In Stock
11/16" Channel filler weatherstrip

p/n: 70-0075-57

Channel pad, window carrier, incorporating weatherstrip. Used for some side window lower channel. Available by the foot.

$9.19/ft.
In Stock
Hood to Fender Bumper

p/n: 40-0503-42

Bumper, hood to fender ledge. Correct original cross-section. Up to ten (10) required per car.

$8.59/ea.
In Stock
Side Window Bumper

p/n: 40-0116-70

Pad, side window anti-rattle. Five sixteenths (5/16) inch by one (1) inch for three sixteenths (3/16) inch by three fourths (3/4) inch slot in sheet metal.

$8.59/ea.
In Stock
7/16" Rear Window Weatherstrip

p/n: 30-0044-77

This Rear Window Weatherstrip is made of a high-quality EPDM dense rubber. Extra light, plain channel for one fourth (1/4) inch glass. Three thirty seconds (3/32) inch thick wall. Available by the foot.

$8.59/ft.
In Stock
7/8" Window Weatherstrip

p/n: 70-1191-52

This Window Weatherstrip is for models without chrome reveal molding. Available by the foot.

$8.59/ft.
In Stock