Fuel Neck Grommet
p/n: 60-0336-41
Grommet, fuel filler neck. Fully molded rubber. Three and fifteen sixteenths inch (3-15/16") outside diameter by two and one sixteenth inch (2-1/6") top hole diameter by two and three sixteenths inch (2-3/16") bottom hole diameter.
Gearshift Boot
p/n: 70-2285-26
Boot, transmission control shift lever. Fully molded out of black rubber instead of original white rubber, though it could be painted like original. For vehicles with Hydra-Matic column shift
Gearshift Bushing
p/n: 60-0237-24
This Gearshift Bushing is fully molded and designed from the original part for superior fitment and seal. This bushing is made from high-quality EPDM dense rubber to provide excellent durability. Designed for the gearshift shaft lever, large type.
Gearshift Seal
p/n: 60-0471-24
This Gearshift Seal is designed from the original part for superior fitment and function. For the gearshift at floor.
Glass Run Channel - Vent Window Delete
p/n: 70-3891-58
This Glass Run Channel pair is for applications where the vent window has been eliminated. One pair fits both driver (Left) and passenger (Right) side doors.
Hard Top Seal Set
p/n: 70-3900-68
This comprehensive four (4) piece Hard Top Seal Set contains the side rail seals as well as the cab and shell header seals. These parts are designed from originals with fully molded corners and end pieces for superior performance and factory fit.
Hardtop Roof Rail Weatherstrip
p/n: 82-0036-68
Hardtop roof rail weatherstrip. This part fits on the roof of the vehicle and seals the side window when the window is fully raised.
Hardtop Roof Rail Weatherstrips
p/n: 82-0037-68
This Hardtop Roof Rail Weatherstrip pair is made of ozone resistant EPDM sponge rubber with molded A pillar ends and corners for a factory like fit. These high-quality weatherstrips fit on the roof of the vehicle and work to seal the side windows when the window is fully raised.
Headlight Door To Lens Ring Seals
p/n: 70-0389-14
This Headlight Door To Lens Ring seal pair is designed from the original part for superior fitment and function. The part works to seal between the headlight door housing and the headlight retaining ring. The part is a single lip type seal for sealed beam headlights.
Headlight Door To Lens Weatherstrips
p/n: 70-0493-14
This Headlight Door To Lens Weatherstrip pair is the double lip type for sealed beam headlights. The pair is molded without wire. Designed from the original part to fit correctly.
Headlight Mounting Pad
p/n: 70-0201-14
This Headlight Mounting Pad is designed from the original part for superior fitment and seal. This pad acts as the headlight adjusting collar. Sold as a pair.
Headliner Retainer Strip
p/n: 60-0368-88
Retainer strip. Holds cardboard headliner in place. Twelve (12) foot strip.Length: 144.0 inches. Width: .5625 inches.
Heat and Sound Insulator Underlayment
p/n: 70-4676-88
This single piece die-cut Heat and Sound Insulator Underlayment for floors lays under the carpeting's felt mat. This underlayment will decrease road noise and decrease heat inside the trucks interior compartment. Pre-cut and ready to be installed into your vehicle to improve driving comfort.
Hood and Fender Bumper
p/n: 70-3446-42
This Hood / Fender Bumper is a quality reproduction of the original factory part. This adjustable rubber bumper attaches to the front fender to support / cushion the hood closure.
Hood Corner Pad
p/n: 60-0118-42
Pad. hood corner, steel core as original, front and rear.Length: 1.5 inches.
Hood To Cowl Weatherstrip
p/n: 70-4835-43
This Hood To Cowl Weatherstrip is designed from the original part for superior fitment and seal. An exact reproduction of the original profile. This weatherstrip installs at the rear of the engine bay to seal between the hood and vehicle body cowl.
Hood to Cowl Weatherstrip
p/n: 60-0138-42
This Hood To Cowl Weatherstrip pair installs at the rear of the engine bay to seal between the hood and vehicle body cowl. Sold as a pair for left and right side.
Hood to Cowl Weatherstrip
p/n: 70-4280-43
This Hood to Cowl Weatherstrip is designed from the original part for superior fitment and seal. An exact reproduction of the original profile. This seal mounts at the rear of the engine bay to seal between the hood and vehicle body cowl.
Hood to Cowl Weatherstrip
p/n: 70-4135-43
This Hood To Cowl Weatherstrip is designed from the original part for superior fitment and seal. This seal mounts at the rear of the engine bay directly to the body.
Hood To Cowl Weatherstrip
p/n: 70-4897-43
This Hood To Cowl Weatherstrip is designed from the original part for superior fitment and seal. An exact reproduction of the original profile. This weatherstrip installs at the rear of the engine bay to seal between the hood and vehicle body cowl.
Hood to Cowl Weatherstrip
p/n: 60-0056-42
This Hood to Cowl Weatherstrip is extruded from a high quality dense rubber for a durable and proper seal. This seal mounts at the rear of the engine bay to seal between the hood and vehicle body cowl.
Hood to Fender Bumper
p/n: 60-0542-42
This Hood to Fender Bumper set is a quality reproduction of the original factory part. These rubber bumpers attach to the front fender to support / cushion the hood closure.
Inner Fender to Cowl Filler Set
p/n: 70-3356-45
This six (6) piece Inner Fender to Cowl Filler set is designed from the original part for superior fitment and seal. Filler pieces are die cut from quality masticated rubber to authentic original dimensions. Pieces fit at rear of fender to cowl panel.
Kick Panel Vent Gaskets
p/n: 70-4919-88
This Kick Panel Vent Gasket pair is designed from the original part for superior fitment and function. Can be used on trucks with or without A/C.
Left Door Only Weatherstrip - Extended Cab Pickup
p/n: 70-4881-73
This Door Weatherstrip pair is designed from the original part for superior fitment and seal. Push-on type weatherstrip installs on the body of the driver side door on 3-door extended cab model pickups.
License Plate Light Lens Gasket
p/n: 70-3497-17
This License Plate Light Lens Gasket is designed from the original part for superior fitment and seal. This gasket fits between license plate light lens and housing.
Liftgate Weatherstrip
p/n: 70-4122-85
This Liftgate Weatherstrip seal is designed from the original part for superior fitment and seal. The push-on style weatherstrip mounts on the upper portion of the body on liftgate models.
Multi-Purpose Clips
p/n: 70-4802-45
A ten (10) piece set of Multi-Purpose Clips. Commonly used to retain Hood to Cowl Weatherstrips or Inner Fender Splash Panels.
One Piece Windshield Reveal Molding
p/n: 70-4289-52
This three (3) sided, One Piece Windshield Reveal Molding is designed from the original part for superior fitment. This part fits across the top and on each side of the windshield. The part is made with top quality materials and with the proper molding profile for an exact fit and finish.
Outer Front Header Weatherstrip
p/n: 70-4834-68
This removable hardtop Outer Front Header Weatherstrip is designed from the original part for superior fitment and seal. This weatherstrip installs on the front of the shell with weatherstrip adhesive glue (not included) and presses against the cab weatherstrip. This single piece is for the double wall hardtop models.
Paint Reseal and Gasket Set
p/n: 70-4310-44
This Paint Reseal Gasket Set contains like original design reproductions for the vehicles specific exterior pieces. These reproductions are die-cut from quality materials to the original design for superior performance, durability, and a factory like fit.
Peel-N-Stick Door Edge Weatherstrip
p/n: 70-0390-WT
This Peel-N-Stick Door Edge Weatherstrip is designed for a specific set of vehicles but with its generic shape, has many uses outside of its original purpose. Available by the foot. Available by the foot.
Peel-N-Stick Door Weatherstrip
p/n: 70-0331-WT
This Peel-N-Stick Door Weatherstrip is made from high-quality EPDM sponge rubber. Available by the foot.
Peel-N-Stick Door Weatherstrip
p/n: 70-0145-WT
This Peel-N-Stick Door Weatherstrip is made from a high-quality EPDM sponge rubber. Available by the foot.
Quarter Window Lockstrip - BLACK
p/n: 70-3202-52
This Quarter Window Lockstrip is designed from the original part for superior fitment and function. This black lockstrip inserts into the weatherstrip to lock in the window glass. Requires 2 sets per vehicle.
Quarter Window Lockstrip - CHROME
p/n: 70-3203-52
This Quarter Window Lockstrip is designed from the original part for superior fitment and function. This chrome lockstrip inserts into the weatherstrip to lock in the window glass. Requires 2 sets per vehicle.
Quarter Window Weatherstrips with Trim Groove
p/n: 70-2480-77
This Quarter Window Weatherstrip pair is made from ozone resistant EPDM rubber and to the original for an authentic fit and finish. This window weatherstrip has a trim groove for a lockstrip.
Quarter Window Weatherstrips with Trim Groove
p/n: 70-2481-77
This Quarter Window Weatherstrip with Trim Groove pair is designed from the original part for superior fitment and seal. These Left and Right weatherstrips mount around the full perimeter of the quarter glass for a precise, factory fit. For models WITH reveal molding.
Radiator bracket cushion
p/n: 70-2555-31
Cushions, radiator support, lower. Fully molded, specially designed to duplicate original part.
Rear Cargo (Barn) Door Weatherstrips
p/n: 70-1730-72
This Rear Cargo (Barn) Door Weatherstrip (1955-2nd type) set designed from the original part for proper fitment and seal. Designed with fully molded corners, clips and end pieces for superior performance and fitment.
Rear Cargo Door Hinge Gaskets Set
p/n: 60-0659-69
This four (4) piece molded Rear Cargo Door Hinge Gasket Set is made to original specifications for proper fitment. Seals are fully molded from top quality rubber to ensure durability, fitment and proper seal.
Rear Cargo Door Upper Drip Rail
p/n: 70-4180-85
This Rear Cargo Door Upper Drip Rail is a reproduction designed for superior fitment and seal. This weatherstrip mounts on the upper portion of the body above the rear opening cargo doors.
Rear Cargo Door Upper Weatherstrip
p/n: 70-4703-73
This Rear Cargo Door Upper Weatherstrip is designed from the original part for superior fitment and seal. Push-on type door weatherstrip mounts on the upper portion of the body and seals against the closed cargo doors.
Rear Cargo Door Weatherstrip
p/n: 70-1254-72
Rear Cargo Door Weatherstrip for barn door style rear doors. The part fits around the opening edge, left and right. The part has the proper molded corners and molded ends as with the original.
Rear Cargo Door Weatherstrip - On Body
p/n: 70-4885-73
This Rear Cargo Door Weatherstrip is designed from the original part for superior fitment and function. This weatherstrip mounts on the body to seal the rear cargo doors. It fits at the top and sides of the rear door opening.
Rear Cargo Door Weatherstrip Set
p/n: 90-0154-72
This three (3) piece Rear Cargo Door Set includes the major weatherstrip components needed for the two (2) rear doors of your vehicle project. These parts are reproductions designed from originals with fully molded corners and corrosion resistant brass end pieces for superior performance and a factory fit.
Rear Cargo Door Weatherstrips
p/n: 70-1925-72
This Rear Cargo Door Weatherstrip pair is designed from the original parts for superior fitment and seal. An authentic design with one door made with perimeter configuration, and other door seal made in single strip like original.
Rear Cargo Door Weatherstrips
p/n: 70-4162-72
This two (2) piece Rear Cargo Door Weatherstrip set is for the Rear Cargo (Barn) Doors. It is designed from the original parts for superior fitment and seal. These weatherstrips mount directly to the doors sealing the two together when closed.