Brake Adjustment Hole Cover Plug
p/n: 70-1092-24
A quality molded rubber Brake Adjustment Hole Cover Plug that inserts into brake adjustment hole in the backing plate. Most models with drum brakes. Length: 1.25 inches. Height: .875 inches.
Sun Visor Tips
p/n: 20-2882-88
These Sun Visor Tips are reproductions manufactured to OEM specifications to install for an authentic fit, finish and function. Sold as a pair.
3/4" Body Hole Plug
p/n: 20-1038-21
This Body Hole Plug is designed from the original part for superior fitment, finish and function. This plug is made from high quality EPDM dense rubber to provide excellent durability. This body plug covers a sheet metal hole that is three-fourths (3/4") inches in diameter.
1-1/4" Body Hole Plug
p/n: 20-1039-21
This Body Hole Plug is designed from the original part for superior fitment, finish and function. This plug is made from high quality EPDM dense rubber to provide excellent durability. This body plug covers a sheet metal hole that is one and one fourth (1-1/4") inches in diameter.
Body Hole Plug
p/n: 20-1040-21
This Body Hole Plug is designed from the original part for superior fitment, finish and function. This plug is made from high quality EPDM dense rubber to provide excellent durability. This body plug covers a sheet metal hole that is one and one half (1-1/2") inch in diameter.
Glovebox Arm Bumper Stop
p/n: 20-1399-88
Stop, glovebox arm.Ford Truck 1957-64 Stop, glovebox arm. Requires 2 each. Ford Cars 1955-68 Bumper, glovebox door check arm stop.
Standard Bumper
p/n: 20-0001-88
This Standard Bumper pair is designed from the original part for superior fitment and function. This rubber bumper fits ashtray or glovebox doors.
Body Hole Plug
p/n: 20-1041-21
Plug, cowl and floor pan. This body plug covers a sheet metal hole that is one and one seven eighths (1-7/8) inch in diameter.
Brake Pedal Pad
p/n: 20-1043-22
This reproduction Brake Pedal Pad slips over the full perimeter of the brake pedal for a precise, factory fit. Replaces original brake pedal pad for models with manual transmission and manual drum (not disc) brakes.
Fuel filler cover bumper
p/n: 20-0006-41
Bumpers, fuel tank door. Single stem and double retainer bumper set.
Hood, Door Or Liftgate Bumpers
p/n: 20-0907-71
This Hood, Door Or Liftgate Bumper pair is a quality reproduction of the original factory part.
Parking Light Lens Gaskets
p/n: 20-1025-16
This Parking Light Lens Gasket pair is designed from the original part for superior fitment and seal. This reproduction gasket fits between the Parking Light Lens and the Parking Light Housing or Bezel.
Adjustable Hood Bumper
p/n: 70-2715-42
This Radiator Support to Hood Bumper is a quality replacement for the original factory part. This adjustable bumper attaches to the radiator support to cushion / stop the hood closure. Usually requires two (2) front bumpers each per vehicle.
Steering Column To Floor Seal
p/n: 20-1071-36
This Steering Column is designed from the original part for superior fitment and sealing. Seal part is die cut from quality masticated rubber to authentic original dimensions. This part fits around the steering column to seal the column through the body floor pan inside the vehicle.
Steering Column Lower Flange Insulator
p/n: 20-1532-88
This Steering Column Lower Flange Insulator is designed from the original part for superior fitment and function. This insulator fits around the lower steering column inside the vehicle to prevent metal to metal contact.
Taillight Lens Gaskets - Station Wagon
p/n: 20-1012-15
This Taillight Lens Gasket pair is designed from the original part for superior fitment and seal. This reproduction gasket fits between the taillight lens and taillight housing. For Station Wagon models.
Parking Light Lens Gaskets
p/n: 20-0166-16
This Parking Light Lens Gasket pair is designed from the original part for superior fitment and seal. This reproduction gasket fits between the Parking Light Lens and the Parking Light Housing or Bezel.
Back Up Light Lens Gasket Set
p/n: 20-1030-17
This four (4) piece Back Up Light Lens Gasket Set is designed from the original part for superior fitment and seal. These reproduction gaskets fit between the back-up light lens and the back-up light housing or light bezel. Two (2) gaskets per lens for Station Wagons.
Clutch Pedal Rod Boot
p/n: 20-1049-23
This Clutch Pedal Rod Boot is designed from the original part for superior fitment and seal. Accordion style boot seals the clutch rod to the floor.
Front suspension bumper
p/n: 20-1062-32
Bumper, front suspension. Bumper section is 1-5/8" tall, 2" long, and 1-3/8 wide.
Stabilizer Bar End Link Repair Set
p/n: 20-1068-33
This eleven (11) piece Stabilizer Bar End Link Repair Set is designed to withstand harsh conditions without deteriorating. Two (2) end link sets required per car.
Clutch Lever Dust Boot
p/n: 70-4760-24
This Clutch Lever Dust Boot covers the opening on your engine bellhousing for manual transmission models. A reproduction manufactured to OEM specifications to install for an authentic fit, finish and function.
Rear Leaf Spring Insulator
p/n: 20-2733-32
This Rear Leaf Spring Insulator is an exact replacement of the rear spring center mount rubber insulator block that mounts below the leaf spring. Four (4) required per vehicle. Fits 2-1/2" leaf spring.
Radiator Mounting Pads
p/n: 20-0183-31
This Radiator Mounting Pad pair is designed from the original part for superior fitment and function. These upper mounting pads secure and isolate the radiator at its upper mounting point.
Hood to Top of Radiator Weatherstrip
p/n: 20-1083-42
This Hood to Top of Radiator Weatherstrip is designed from the original part for superior fitment and seal. An exact reproduction of the original profile. This weatherstrip installs at the top of the radiator to seal between the radiator and hood.
Brake Pedal Pad
p/n: 20-1044-22
Pad, brake pedal. Models with automatic transmission and manual brakes.
Parking Light Lens Gaskets
p/n: 20-0167-16
This Parking Light Lens Gasket pair is designed from the original part for superior fitment and seal. This reproduction gasket fits between the Parking Light Lens and the Parking Light Housing or Bezel.
Firewall to Hood Weatherstrip - Cowl Lacing
p/n: 20-1088-42
This Firewall to Hood Weatherstrip is designed from the original part for superior fitment and seal. An exact reproduction of the original profile. This single piece cowl lacing seal mounts at the rear of the engine bay to seal between the hood and vehicle body cowl / firewall.
Headlight Door To Fender Gasket
p/n: 20-1005-14
This Headlight Door To Fender Gasket pair is designed from the original part for superior fitment, appearance and seal. This gray rubber seal fits between the headlight door (bezel) and front fender.
Rear Leaf Spring Shackle Assembly
p/n: 20-1066-32
This reproduction Rear Leaf Spring Shackle Assembly is complete with shackle bar plates, rubber bushings and lock nuts. For fitting the suspension leaf spring at its rear spring eye to the vehicle body. Two (2) assemblies required per car.
Accelerator Pedal Pad
p/n: 20-1075-40
This Accelerator Pedal Pad is made of top-quality EPDM rubber with a high level of fit and finish. Designed to be a direct fit reproduction.
Front Fender to Cowl Seal
p/n: 20-1100-45
This two (2) piece Front Fender to Cowl Seal pair is designed from the original part for superior fitment and seal. These seals are also known as lower extension seals.
Lower Sash Channel Filler, Door Glass
p/n: 20-0240-58
Channel, door window glass lower rubber. Front or rear doors. One (1) pair does two (2) windows.
Front Fender Dust Shield Filler
p/n: 70-3071-45
This six (6) piece Front Fender Dust Shield / Splash Apron set is designed from the original part(s) for superior fitment and seal. Filler pieces are die cut from quality masticated rubber to authentic original dimensions.
Side Window Glass Run Channels
p/n: 70-4641-58
This Side Window Glass Run Channel pair is designed from the original part for superior fitment and seal. These two (2) pieces of flexible window run channel are for the sides and top of door windows.
Fender to Radiator Seal
p/n: 20-1101-45
This two (2) piece Fender to Radiator Seal is designed from the original part for superior fitment and seal. Installs between the front fender and the radiator support.
Voltage Regulator Cover Shield
p/n: 70-4531-17
This Voltage Regulator Cover Shield is designed from the original part for superior fitment and function. This cover shield is located over and above the voltage regulator.
Front Engine Mount
p/n: 20-1001-11
Front motor mount support. Left-hand side only. Fairlane big block engines. See description for fitment.
Front Engine Mount
p/n: 20-1000-11
This Front Engine Mount is for the right-hand side only. The mount supports the engine and dampen vibration.