Rear Bumper Grommet
p/n: 70-3113-28
Grommets, rear bumper. For rear bumper back bar to rear fender on inside surface of fender. Fully molded rubber.
Luggage Rack Grommet
p/n: 17-0021-46
Grommet, luggage rack support arm through body.Length: 2.25 inches. Width: 1.25 inches.
Front Apron Crossbar Grommet
p/n: 30-0040-44
Grommets, front apron crossbar. Molded left and right just like original.Length: 3.625 inches. Width: 3.625 inches.
Front Bumper Grommet
p/n: 30-0077-28
Grommets, front bumper. Molded right and left, including retaining flange. Fully molded rubber.
Rear Bumper Grommet
p/n: 30-0197-29
Grommets, rear bumper. Molded left and right. Fully molded rubber.
Rear Bumper Grommet
p/n: 30-0127-29
Grommets, rear bumper extension bar through rear fender for wrap around bumpers. Fully molded rubber w/ full detail as in original.
Side Mount Grommet
p/n: 30-0041-37
Grommets, sidemount support arm, right and left.Length: 5.50 inches. Width: 4.25 inches.
Division Bar Grommet
p/n: 70-3132-62
Grommets, rear door vent divider post, upper and lower, right and left. 4 piece set.
Front Bumper Grommet
p/n: 70-0291-28
Grommets, front bumper arm. Hollow construction for good fit. Fully molded rubber.
Spare Wheel Carrier Grommet
p/n: 40-0254-37
Grommet, rear spare wheel carrier bracket hole. Two (2) per car.Length: 4.1875 inches.
Ride regulator control grommet
p/n: 70-0639-33
Grommets, ride regulator control rod through fender splash shield. Two (2) per car. Made without rod hole. You cut rod slot as required at installation.
Front Bumper Grommet
p/n: 30-0071-28
Grommets, front bumper. Proper hollow construction as original for good fit. Fully molded rubber.
Front Bumper Grommet
p/n: 40-0122-30
Grommets, front bumper. Hollow construction for good fit. Fully molded rubber.
Gearshift Grommet
p/n: 70-0334-26
Shield, gearshift through floorboard, molded in all detail, including bolt holes.Length: 7.5 inches. Width: 5.875 inches.
Luggage Rack Grommet
p/n: 70-0403-46
Grommets, luggage rack arms through sheet metal, special tall type.
Rear Spare Wheel Carrier Seal
p/n: 40-0141-37
Grommet, rear spare wheel carrier.Some models require 3 pieces (1-1/2 prs).Length: 3.375 inches.
Side Mount Spare Wheel Grommet
p/n: 70-0128-37
Grommets, sidemount brace rod, good copy.Height: 1.375 inches.
Rear Bumper Grommet
p/n: 30-0137-29
Grommets, rear bumper support bar to body. Fully molded rubber w/ retaining flange.
Side Mount Grommet
p/n: 30-0324-37
Grommet, side wheel carrier to running board splasher, right and left. Width: 2.50 inches. Height: 4.625 inches.
Steering Column Grommet
p/n: 30-0348-36
This Steering Column to Toe Board Grommet is designed from the original part for superior fitment and sealing. This part fits around the steering column to seal the column through the body floor pan. Made with a brass core, like original.
Headlight Grommet
p/n: 40-0008-14
Grommets, headlight bar to shell. Slightly oval. One and one fourth (1-1/4) inch diameter hole.
Headlight Grommet
p/n: 10-0169-14
Grommet, headlight bracket at radiator shell. Molded correctly right and left.Length: 3.375 inches.
Rear Bumper Grommet
p/n: 30-0067-29
Grommets, rear bumper. Length: 4.3125 inches. Width: 2.6875 inches.
Rear Bumper Grommet
p/n: 30-0047-29
Grommets, rear bumper. For models with luggage racks. Length: 4.125 inches. Width: 3.375 inches.
Spare wheel carrier grommet
p/n: 30-0334-37
Grommet, rear spare wheel carrier bracket. Two (2) per car. (Also order our #32-0355-37 separately).
Steering Column Grommet
p/n: 30-0288-36
This Steering Column to Toe Board Grommet is designed from the original part for superior fitment and sealing. This part fits around the steering column to seal the column through the body floor pan.
Steering Column Grommet
p/n: 30-0455-36
This Steering Column to Floorboard Grommet is designed from the original part for superior fitment and sealing. This part fits around the steering column to seal the column through the body floor pan. Made with a brass core, like original.
Front Bumper Grommet
p/n: 27-0004-28
Grommet, front or rear bumper. Hollow construction, perfect fit. Note: In 1935 this grommet is used on the front bumper. In 1937-1938: this bumper is used on the rear bumper.
Steering Column Grommet
p/n: 70-1895-36
This Steering Column To Dash Grommet is designed from the original part for an authentic fitment. This grommet is fully molded from quality dense rubber to original dimensions. This part fits around the steering column to fit between the column and dash panel.
Steering Gear Grommet
p/n: 60-0436-32
This Steering Gear Grommet is designed from the original part for superior fitment and function. Molded with metal core as original with all original features.
Rear Bumper Grommet
p/n: 60-0061-28
Grommets, rear bumper, right and left, for round bumper support bracket; left hand grommet has clearance for electrical conduit.
Rear Bumper Grommet
p/n: 70-0164-29
Grommets, rear bumper. (Some cars have this type, some have our #70-0144-29, sold separately. They are both interchangeable and original). Fully molded rubber.
Sidemount Wheel Carrier Grommet
p/n: 60-0002-37
This Sidemount Wheel Carrier Grommet for the wheel carrier brace support-at-cowl panel. Manufactured with a heavy brass core. Has a flexible neck. A close copy of original.
Front Bumper Grommets
p/n: 60-0257-28
This reproduction Front Bumper Grommet pair is designed from the original part for an authentic fit, finish and appearance. Fully molded with EPDM dense rubber.
Rear Bumper Grommet
p/n: 40-0363-30
Grommet, rear bumper to body, right and left. Fully molded rubber.
Bumper Grommet
p/n: 10-0167-28
Grommets, front and rear bumper arm. Fully molded rubber, slightly angular.
Front Bumper Grommet
p/n: 60-0080-28
Grommets, front bumper, right and left. Hollow construction as original. Fully molded rubber.
Rear Bumper Grommet
p/n: 40-0468-30
Grommets, rear bumper. Fully molded rubber, used on rear side brackets only.
Bumper Grommet
p/n: 30-0039-28
Grommets, front or rear bumper. On models without trunk racks. Two (2) pair used per car if needing both front and rear bumper grommets.
Side mount spare wheel grommet
p/n: 60-0331-37
Grommet, sidemount wheel carrier-through-fender, right and left.
Steering Column Grommet - Brown
p/n: 60-0256-36
This brown rubber Steering Column to Floor Grommet is designed from the original part for superior fitment and sealing. This part fits around the steering column to seal the column through the body floor pan. Brass core as original.
Steering Column Grommet
p/n: 70-1509-88
This Steering Column To Floor Grommet is designed from the original part for superior fitment and sealing. This grommet is fully molded from quality dense rubber to authentic original dimensions. This part fits around the steering column to seal the column through the body floor pan.
Steering Column Floorplate
p/n: 70-1425-88
This black rubber Steering Column Floorplate is designed from the original part for an authentic fit, finish and appearance. Fits to the steering column to firewall body opening.
Steering Column Grommet
p/n: 70-1894-36
This Steering Column To Floor Grommet is designed from the original part for superior fitment and sealing. This grommet is fully molded from quality dense rubber to authentic original dimensions. This part fits around the steering column to seal the column through the body floor pan.
Rear Bumper Grommet
p/n: 40-0334-30
Grommet, rear bumper support bars. (Rear fender hole cover). Length: 4.25 inches.
Front Bumper Grommet
p/n: 27-0054-28
Grommet, front bumper. Fully molded rubber, detailed and flanged as original.
Rear Bumper Grommet
p/n: 40-0296-30
Grommets, rear bumper clamp to frame end. Comes as a four (4) piece set. Fully molded rubber.
Rear Bumper Grommet
p/n: 40-0180-30
Grommet, rear bumper support bar to gas tank apron. One and three fourths (1-3/4) inch inside diameter.
Side Mount Grommet
p/n: 30-0205-37
Grommet, side mount support arm to running board splasher, right and left. Height: 4.25 inches.
Front Bumper Grommet
p/n: 60-0321-28
Grommet, front bumper. Fully molded rubber. For vehicles with knee action.
Fuel Neck Grommet
p/n: 40-0161-39
Grommet, fuel filler neck includes retainer flange. Oblong fully molded rubber. Two and three sixteenths inch (2-3/16") inside diameter by four inch (4") outside length.
Steering Column Grommet - Brown
p/n: 40-0144-89
This molded Steering Column to Toe Board Grommet is designed from the original part for superior fitment and function. This brown rubber part seals around the steering column at the toe board on the interior side.
Rear Bumper Grommet
p/n: 60-0406-28
Grommets, rear bumper. Right and left sides. Left side has clearance for tail light wire.
Steering Column Grommet
p/n: 70-2316-88
This Steering Column To Floor Grommet is designed from the original part for superior fitment and sealing. This grommet is fully molded from quality dense rubber to authentic original dimensions. This part fits around the steering column to seal the column through the body floor pan.
Rear Bumper Grommet
p/n: 70-2231-29
Grommets, rear support arm. Fully molded with all original details.
Headlight Grommet
p/n: 40-0009-14
Grommet, headlight bar to shell. One and one fourth (1-1/4) inch round hole.
Front Bumper Grommet
p/n: 27-0018-28
Grommet, front bumper. Fully detailed and flanged as original. Fully molded rubber.
Steering Column Grommet
p/n: 70-0682-88
This Steering Column Grommet is designed from the original part for superior fitment and function. The grommet fits the steering column at toe board over carpet.