Search Results
Ramp Gate Kit - Large Hollow Half Round w/Double Tabs - 35ft
p/n: 90-3328-283
Toy Hauler and RV Ramp Gate Kit - 35 ft
Ramp Gate Kit - Large Hollow Half Round - 35ft
p/n: 90-3327-283
Toy Hauler and RV Ramp Gate Kit - 35 ft
Peel-N-Stick Trunk Weatherstrip
p/n: 70-1691-WT
This Peel-N-Stick Trunk Weatherstrip is designed for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body. Easy to install 3M Peel-N-Stick backing provides superior adhesion for reliable performance.
Removable Hardtop Weatherstrip Set
p/n: 70-3013-68
This three (3) piece Removeable Hardtop Weatherstrip Set seals the hardtop against the top of the windshield frame and the sides of the body.
Left (Driver's Side) Rear Cargo Door Weatherstrip
p/n: 82-0199-72
This Left Rear Cargo Door Weatherstrip is designed from the original part for superior fitment and sealing. This peel-n-stick weatherstrip is for the left (driver's side) cargo door at the rear of the van.
Right (Passenger's Side) Rear Cargo Door Weatherstrip
p/n: 82-0200-72
This Right Rear Cargo Door Weatherstrip is designed from the original part for superior fitment and sealing. This peel-n-stick weatherstrip is for the right (passenger's side) cargo door at the rear of the van.
Trunk Weatherstrip
p/n: 70-1691-84
This Trunk Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.
Peel-N-Stick Trunk Weatherstrip
p/n: 70-1690-WT
This Peel-N-Stick Trunk Weatherstrip is designed for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body. Easy to install 3M Peel-N-Stick backing provides superior adhesion for reliable performance.
Front Door Weatherstrips
p/n: 70-2431-72
This Door Weatherstrip pair is the primary door to body weatherstrip for both front doors. The proper extrusion cross section dense rubber with a bonded adhesive strip.
Trunk Weatherstrip
p/n: 70-1690-84
This Trunk Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.
Peel-N-Stick Trunk Lid Weatherstrip
p/n: 70-2835-WT
This Peel-N-Stick Trunk Lid Weatherstrip is designed for superior fitment and seal. The weatherstrip mounts around the full perimeter of the trunk lid to seal directly to the body. Easy to install 3M Peel-N-Stick backing provides superior adhesion for reliable performance.
1/8" x 5/8" Rectangular Sponge Rubber Door Weatherstrip
p/n: 70-4307-472
This is a convenient twenty (20) foot length of Rectangular 1/8" x 5/8" Weatherstrip for compartment, cabin and crew doors. Made from high quality EPDM sponge rubber. 3M Peel-N-Stick backing provides superior adhesion for reliable performance. Excellent for use in many Fire & Rescue service vehicle applications.
Trunk Lid Weatherstrip
p/n: 70-2835-84
This Trunk Lid Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk lid.
Peel-N-Stick Dense Rubber Cushion Strip
p/n: 70-2675-265
Used as a Slide-Out Wiper Aid to help the wiper be oriented in the correct direction after the slide is extended or retracted. Available in fifteen (15) foot lengths.
3/4" Peel-N-Stick Weatherstrip - 10ft
p/n: 83-0138-73
Peel-N-Stick weatherstrip. Top-quality extrusion with bonded self adhesive strip. Available in 10ft lengths.
7/8" Peel-N-Stick Weatherstrip - 10ft
p/n: 83-0133-73
Peel-N-Stick weatherstrip. Top-quality extrusion with bonded self adhesive strip. Available in 10ft lengths.
Peel-N-Stick Small Hollow Half Round
p/n: 83-0106-477
This sponge rubber weatherstrip provides a positive seal to access doors, crew compartments, hatches and storage lockers. Available in 15ft lengths.
1/4" x 1" Rectangular Sponge Rubber Door Weatherstrip
p/n: 70-4306-472
This is a convenient twelve (12) foot length of rectangular 1/4" x 1" weatherstrip for compartment, cabin and crew doors. Made from high quality EPDM sponge rubber. 3M Peel-N-Stick backing provides superior adhesion for reliable performance. Excellent for use in many Fire & Rescue service vehicle applications.
Peel-N-Stick Trunk Weatherstrip
p/n: 70-0773-WT
This Peel-N-Stick Trunk Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.
11/16" Peel-N-Stick Weatherstrip - 10ft
p/n: 83-0140-73
Peel-N-Stick weatherstrip. Top-quality extrusion with bonded self adhesive strip. Available in 10ft lengths.
27/32" Peel-N-Stick Weatherstrip - 10ft
p/n: 83-0123-73
Peel-N-Stick weatherstrip. Top-quality extrusion with bonded self adhesive strip. Available in 10ft lengths.
27/32" Small "V" Lip Hollow with Peel-N-Stick
p/n: 83-0123-377
This Small "V" Lip Hollow with Peel-N-Stick is ideal for hatch and compartment doors. The 3M Peel-N-Stick backing makes installation quick and mess free. Available in 10ft strips.
5/8" Peel-N-Stick Weatherstrip - 10ft
p/n: 83-0136-73
Peel-N-Stick weatherstrip. Top-quality extrusion with bonded self adhesive strip. Available in 10ft lengths.
7/8" Peel-N-Stick Weatherstrip - 10ft
p/n: 83-0134-73
Peel-N-Stick weatherstrip. Top-quality extrusion with bonded self adhesive strip. Available in 10ft lengths.
Peel-N-Stick Small Hollow
p/n: 83-0123-277
High-quality extrusion with bonded self-adhesive strip. Sold in a 10ft length.
Peel-N-Stick Trunk Weatherstrip
p/n: 20-1389-WT
This Peel-N-Stick Trunk Weatherstrip is designed for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body. Easy to install 3M Peel-N-Stick backing provides superior adhesion for reliable performance.
Peel-N-Stick Trunk Weatherstrip
p/n: 70-0774-WT
This Peel-N-Stick Trunk Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body. Easy to install 3M Peel-N-Stick backing provides superior adhesion for reliable performance.
11/16" Peel-N-Stick Weatherstrip - 10ft
p/n: 83-0135-73
Peel-N-Stick weatherstrip. Top-quality extrusion with bonded self adhesive strip. Available in 10ft lengths.
Auxiliary Door To Body Weatherstrip
p/n: 70-4081-73
This Auxiliary Door To Body Weatherstrip is designed from the original part for superior fitment and seal. This seal mounts directly to the body over the front or rear door to seal against the top of the door.
Peel-N-Stick Hatch & Door Seal
p/n: 83-0137-477
This sponge rubber weatherstrip provides a positive seal to access doors, crew compartments, and storage lockers. Available in 10ft lengths.
Peel-N-Stick Hollow Quarter Round
p/n: 83-0126-472
This Peel-N-Stick sponge rubber seal is commonly applied in combination with other seals on crew compartment doors. Available in 10ft lengths.
1/4" Peel-N-Stick Hood to Cowl Weatherstrip
This Hood to Cowl Weatherstrip is made from high-quality EPDM dense rubber for the Builder’s creative application and use. Available in 10ft and 15ft lengths.
Hood To Cowl Dense Rubber Weatherstrip with Peel-N-Stick
1/4" x 3/4" inch Peel-N-Stick dense rubber cushion strip. Typically used for Hood To Cowl weatherstrip applications. Available in ten (10) or fifteen (15) feet lengths.
Extrusion, Street Rod - 15ft
p/n: 83-0117-73
Peel-n-Stick weatherstrip. 15 foot strip. Top Quality extrusion with bonded self adhesive strip. Ideal for numerous uses.
Trunk Weatherstrip
p/n: 70-0773-84
This Trunk Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.
T-Top Beaded Felt Weatherstrip
p/n: 70-4651-68
This T-Top Beaded Felt Weatherstrip is designed from the original part for superior fitment, finish and function. This felt weatherstrip installs at the front and rear edges of the roof at the T-Top opening. Sold Individually - Purchase two (2) if replacing both Front and Rear.
Peel-N-Stick Trunk Lid Weatherstrip
p/n: 20-2858-WT
This Peel-N-Stick Trunk Lid Weatherstrip is designed for superior fitment and seal. The weatherstrip mounts around the full perimeter of the trunk lid to seal directly to the body. Easy to install 3M Peel-N-Stick backing provides superior adhesion for reliable performance.
5/16" Peel-N-Stick Hood to Cowl Weatherstrip
This Peel-N-Stick Hood to Cowl is made from high-quality EPDM dense rubber for your Street Rod or Custom Build project. The weatherstrip is typically used to support or cushion the hood closure. Available in 10ft and 15ft lengths.
Hood to Cowl Sponge Rubber Weatherstrip with Peel-N-Stick
5/16" x 3/4" inch Peel-N-Stick sponge rubber cushioning strip. Typically used for hood to cowl applications. Available in ten (10) or fifteen (15) foot lengths.
Trunk Weatherstrip
p/n: 20-1389-84
This Trunk Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk lid.
Trunk Weatherstrip
p/n: 70-0774-84
This Trunk Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.
Trunk Weatherstrip
p/n: 70-0798-84
This Trunk Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.
Trunk Lid Weatherstrip
p/n: 20-2858-84
This Trunk Lid Weatherstrip is designed from the original part for superior fitment and seal. The weatherstrip mounts around the full perimeter of the trunk lid.
3/4" Peel-N-Stick Extrusion
Extrusion, dense rubber with bonded adhesive. Available in 5ft, 10ft, and 15ft lengths.
Dense Window Beltline
These general use side window horizontal weatherstrips are made of a durable dense rubber and feature our Peel-N-Stick backing. Available in 5ft, 10ft, and 15ft lengths.
Dense Window Beltline
These general use side window horizontal weatherstrips are made of a durable dense rubber and feature our Peel-N-Stick backing. Available in 5ft, 10ft, and 15ft lengths.
Hood To Fender OR Rear Hatch Side Weatherstrips
p/n: 70-4702-44
This reproduction Hood To Fender OR Rear Hatch Side Weatherstrip pair is designed from the original part for superior fitment and seal. The Hood To Fender Weatherstrip pair seals the inner fender to the hood on C5 models. The weatherstrip pair serves as Rear Hatch Side seals on C6 models.
1/4" Flocked Sponge Weatherstrip
Top-quality sponge rubber extrusion with bonded self-adhesive strip. Available in 5ft, 10ft, and 15ft lengths.
11/16" Peel-N-Stick Weatherstrip
Peel-N-Stick weatherstrip. Top Quality extrusion with bonded self adhesive strip. Ideal for numerous uses. Available in 5ft, 10ft, 15ft, and 30ft lengths.
Flocked Sponge Window Beltline
These flocked sponge window beltline weatherstrips are flexible, flocked sponge rubber with a Peel-N-Stick backing. Available in 5ft, 10ft and 15ft lengths.