Need Assistance?

We are here to help.

Call 800-447-0849

Search Results

81 items found matching 1931 Cadillac 370A 4 door Cabriolet - 7 Passenger
Fluted radiator hose

p/n: 70-0001-31

Radiator hoses, fluted style. V-12, V-16.

$227.69/pr.
Made to Order Takes 1-2 Days
Motor Mount

p/n: 70-0442-11

Rear motor mount support pad at transmission. Four (4) piece set after splitting. V-8 and V-12

$182.99/set
Made to Order Takes 2-3 Days
Hood hinge top strap pivot

p/n: 70-0045-42

Pivot, hood hinge top strap. Cold rolled steel as original. Furnished in a four and one half (4-1/2) foot strip long enough for all models.

$174.89/ea.
In Stock
Ferrule installing tool

p/n: 70-0662-69

Installing tool, door and trunk handle ferrule. For cars and trucks using door and trunk handle ferrules such as our #70-0111-69.

$149.89/ea.
In Stock
Axle rebound pad

p/n: 70-1132-32

Pads, front axle rebound.Width: 2.75 inches.

$143.79/pr.
Made to Order Takes 1-2 Days
Vacuum cylinder diaphram

p/n: 50-0063-24

Diaphragm, electromatic clutch control vacuum cylinder. Restores proper operation to clutch if diaphragm leaks air.

$138.39/ea.
In Stock
Axle rebound pad

p/n: 70-0023-32

Pads, rear axle rebound.

$138.29/pr.
In Stock
Motor mount pad

p/n: 70-0977-11

Pad, motor mounting.Width: 1.375 inches. Height: 1.9375 inches.

$134.79/pr.
Made to Order Takes 1-2 Days
Shock and stabilizer seal

p/n: 70-1185-33

Seals, shock absorber and rear stabilizer link. Eight (8) piece set.

$127.99/set
Made to Order Takes 1-2 Days
Hood bumper

p/n: 70-0013-42

Pads, hood hold-down clamp, mount on clamp swivels to hold hood corners in. Set of four (4) rubber pads in solid brass, chrome plated cups.

$120.19/set
In Stock
Side mount spare grommet kit

p/n: 70-1135-37

Grommet set, spare wheel fender mount, for various applications to support arms, brace rods and cowl standoff posts. Six (6) piece set.

$113.79/set
Made to Order Takes 4 Days
Front apron crossbar grommet

p/n: 70-1130-45

Grommets, front splash apron crossbar.Width: 3.5 inches. Height: 3.6875 inches.

$108.89/pr.
Made to Order Takes 1-2 Days
Body mounting pad

p/n: 70-0298-48

Pads, body mounting for front bracket, right and left. Three eighths (3/8) inch by two and three fourths (2-3/4) inch by four (4) inches with two (2) collars and retaining rings. Two (2) required per car.

$107.29/pr.
Made to Order Takes 1-2 Days
Vacuum brake cylinder boot

p/n: 70-0010-24

Boot, vacuum brake cylinder. Made from durable rubber to original configuration.

$106.69/ea.
In Stock
Firewall grommet

p/n: 70-1148-21

Grommet set, firewall, intended for spark and choke rods, fuel line, oil gauge line and radiator brace rods. Six (6) piece set.

$102.99/set
Made to Order Takes 1-2 Days
Cadillac Motors pedal pad

p/n: 70-0076-22

Cadillac Motors pedal pads. Authentic straight diamond pattern. Especially good copy, fine detail.

$97.29/pr.
In Stock
Motor mount pad

p/n: 70-1162-11

Pads, front motor mounting. For Cadillac V-8 see our #70-1161-11.

$97.29/pr.
In Stock
Shock and stabilizer seal

p/n: 70-1184-33

Seals, shock absorber and rear stabilizer link. Eight (8) piece set.Width: 1.1875 inches.

$95.99/set
In Stock
Hood ventilator bumper kit

p/n: 70-0011-42

Pad set, hood vent door open limit. Set of twenty (20) pads for one (1) hood, including split rivets for installing.

$92.59/set
Made to Order Takes 2-3 Days
Fender welting 1/4" bead 50ft

p/n: 70-1098-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide. One fourth (1/4) inch bead, fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty five

$79.49/ea.
In Stock
Fender welting 3/16 bead 50ft

p/n: 70-1100-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide, three sixteenths (3/16) inch, fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty fi

$79.49/ea.
In Stock
Fender welting 50ft chrome

p/n: 70-1102-44

Welting, fender, bright chrome vinyl, three sixteenths (3/16) inch bead, one and one half (1-1/2) inch width. Superior quality. Fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty five (25) foot roll see #70-1101-44.

$79.49/ea.
In Stock
Radiator brace filler strip

p/n: 70-0020-31

Filler strip, radiator brace rods. Retains ignition wire and thermometer tube in hollow brace rods. Thirty (30) inch strips.

$74.89/pr.
In Stock
Cowl vent gasket

p/n: 70-0713-54

Gasket, cowl side ventilator. One eighth (1/8) inch sponge rubber.Length: 11.375 inches. Width: 4.625 inches.

$68.39/pr.
In Stock
Vacuum brake rod cover seal

p/n: 70-0327-24

Cover seal, vacuum brake valve operating rod.

$65.39/ea.
In Stock
Spare tire bumper

p/n: 70-0025-37

Pad, spare wheel standoff post at cowl.

$64.29/pr.
Made to Order Takes 1-2 Days
Coil wire sleeve

p/n: 70-0109-21

Sleeve, coil wire to distributor. Fluted to match upper water hoses rubber only. V-12 & V-16 with coils mounted in radiator, V-8 with coils mounted horizontally on brace rods.

$53.79/ea.
Made to Order Takes 1-2 Days
Taillight gasket

p/n: 70-0258-15

Gaskets, taillight mounting under fender wire conduit base.Width: 3.25 inches.

$52.99/pr.
Made to Order Takes 1-2 Days
Inner Fender Seal

p/n: 60-0288-45

Inner Fender Seal for anti-rattle, runningboard apron to body, or fender splash panels. Nine sixteenths (9/16) inch by seven eighths (7/8) inch slotted sponge rubber to accept rivets. Sold in eight (8) foot strips.

$50.79/ea.
In Stock
Fender welting 1/4" bead 25ft

p/n: 70-1097-44

Welting, fender. Superior quality, proper construction of reinforced vinyl over vinyl core, one and three eighths (1-3/8) inch wide, black only. One fourth (1/4) inch bead, twenty five (25) foot roll. Typically used to attach two (2) fenders to body. For

$46.99/ea.
In Stock
Fender welting 25ft chrome

p/n: 70-1101-44

Welting, fender, bright chrome vinyl, three sixteenths (3/16) inch bead, one and one half (1-1/2) inch width. Superior quality. Twenty five (25) foot roll. Typically used to attach two (2) fenders to body. For fifty (50) foot roll see our #70-1102-44.

$46.99/ea.
In Stock
Starter pedal pad

p/n: 70-1182-18

Pad, starter pedal. Original pattern. Round style.

$46.99/ea.
In Stock
Fender welting 3/16 bead 25ft

p/n: 70-1099-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide, three sixteenths (3/16) inch, twenty five (25) foot roll. Typially used for attaching two (2) fenders to body. For f

$45.19/ea.
In Stock
Wiring grommet

p/n: 70-0410-21

Grommets, horn wire exit from horn motor cover.

$44.99/pr.
In Stock
Steel sash channel

p/n: 70-0641-58

Sash channel, side window glass. U-shaped steel channel only, no filler. Will require that you attach your own window regulator cam to underside as required.

$42.29/ea.
In Stock
Headlight badge bar bushing

p/n: 70-0115-14

Bushing, headlight to badge bar.

$40.39/pr.
In Stock
Luggage rack pad

p/n: 70-0107-46

Pad, luggage rack to rear apron.

$37.59/pr.
Made to Order Takes 1-2 Days
Body mounting pad

p/n: 70-0297-48

Pad, body mounting. Three eighths (3/8) inch by two (2) inch by three (3) inch with collar and retainer ring.

$36.89/ea.
In Stock
5" Wide Bowdrill Cloth Tape

p/n: 70-1175-65

Bowdrill cloth tape is used for covering convertible side window weatherstrip. Available in a 5 ft roll.

$35.49/ea.
In Stock
Hood latch swivel

p/n: 70-0061-42

Swivel, hood latch. Exact copy from .075 steel, pierced for rivets, not plated.

$28.99/ea.
In Stock
Body bolt cushion

p/n: 70-0265-48

Cushion for body bolts, for use in metal cups. Fully molded rubber. One and one half inch (1 1/2") outside diameter by seven sixteenths inch (7/16') inside hole diameter by one and one fourth inch (1 1/4") height.

$20.69/ea.
In Stock
Battery clamp cover

p/n: 70-0095-21

Cover, battery clamp. Control unsightly sulfate buildup. Help protect the nearby metal and finish. Good copy from original part.Length: 3.5 inches.

$20.39/ea.
In Stock
2-1/2" Bowdrill Cloth Tape

p/n: 70-1172-65

Bowdrill cloth tape is used for covering convertible side window weatherstrip. Available in a 5 ft roll.

$16.79/ea.
In Stock
Door handle ferrule

p/n: 70-0111-69

Ferrule, for three fourths (3/4) inch outside door handle. Chrome plated brass. (See #70-0009-69 for grommet). Used for outside door handle or outside trunk handle.

$16.69/ea.
In Stock
Door bumper

p/n: 70-1154-71

Pad, door jamb, rear door fender cut out. One and one half (1-1/2) inch outside diameter, seven eighths (7/8) inch plug.

$15.39/ea.
In Stock
2-1/2" Tan Bowdrill Cloth Tape

p/n: 70-1173-65

Tan bowdrill cloth tape is used for covering convertible side window weatherstrip.

$14.99/ea.
In Stock
Door check link rod end stop

p/n: 70-0326-70

End stop and pad, door check link rod. Rubber with embedded steel plate, five sixteenths (5/16) inch diameter thread. Most models with rod type door checks.

$13.99/ea.
In Stock
Dimmer switch grommet

p/n: 40-0083-88

Grommet, dimmer switch for carpet application.

$11.99/ea.
In Stock
Coil wire sleeve

p/n: 70-1179-21

Sleeve, coil wire to distributor. Fluted to match upper water hoses rubber only.

$10.69/ea.
In Stock
Door Bumper

p/n: 70-1156-71

Pad, door side bumper. Clip retained. Appears identical to Atwood #107, #208.Width: 1.5 inches. Height: 1.3125 inches.

$10.29/ea.
In Stock