Need Assistance?

We are here to help.

Call 800-447-0849

Search Results

79 items found matching 1931 Cadillac 452A 4 door Sedan - 7 Passenger
Runningboard matting

p/n: 70-0420-49

Runningboard matting. Fully molded rubber strips with full length steel cores molded in.

$1,616.99/set
Made to Order Takes 2-3 Days
Motor Mount

p/n: 70-0300-11

Motor mount. Intermediate motor mount for support bolts. Split in half if needed at installation. Four (4) piece set.

$299.39/set
Made to Order Takes 1-2 Days
Fluted radiator hose

p/n: 70-0001-31

Radiator hoses, fluted style. V-12, V-16.

$227.69/pr.
In Stock
Motor Mount

p/n: 70-0443-11

Rear motor support pad at transmission. Four (4) piece set after splitting.

$225.99/set
Made to Order Takes 2-3 Days
Distributor boot

p/n: 70-0004-21

Boot, distributor dust and moisture. Original equipment, exact copy. V-16 only.

$219.19/ea.
Made to Order Takes 1-2 Days
Hood hinge top strap pivot

p/n: 70-0045-42

Pivot, hood hinge top strap. Cold rolled steel as original. Furnished in a four and one half (4-1/2) foot strip long enough for all models.

$174.89/ea.
In Stock
Ferrule installing tool

p/n: 70-0662-69

Installing tool, door and trunk handle ferrule. For cars and trucks using door and trunk handle ferrules such as our #70-0111-69.

$149.89/ea.
In Stock
Vacuum cylinder diaphram

p/n: 50-0063-24

Diaphragm, electromatic clutch control vacuum cylinder. Restores proper operation to clutch if diaphragm leaks air.

$138.39/ea.
In Stock
Axle rebound pad

p/n: 70-0023-32

Pads, rear axle rebound.

$138.29/pr.
In Stock
Axle rebound pad

p/n: 70-1133-32

Pads, front axle rebound.

$132.59/pr.
Made to Order Takes 1-2 Days
Shock and stabilizer seal

p/n: 70-1185-33

Seals, shock absorber and rear stabilizer link. Eight (8) piece set.

$127.99/set
Made to Order Takes 1-2 Days
Windshield Weatherstrip Seal Set

p/n: 70-0016-52

Three piece set includes two 16-1/2" side weatherstrip channels and one 48" bottom weatherstrip channel. Seals windshield glass to body and protects interior of vehicle. All corners are correctly molded to fit perfectly. Exact reproduction of original

$123.39/set
In Stock
Hood bumper

p/n: 70-0013-42

Pads, hood hold-down clamp, mount on clamp swivels to hold hood corners in. Set of four (4) rubber pads in solid brass, chrome plated cups.

$120.19/set
In Stock
Front apron crossbar grommet

p/n: 70-1131-45

Grommets, front splash apron crossbar.Width: 3.5 inches. Height: 3.5 inches.

$110.39/pr.
Made to Order Takes 1-2 Days
Body mounting pad

p/n: 70-0298-48

Pads, body mounting for front bracket, right and left. Three eighths (3/8) inch by two and three fourths (2-3/4) inch by four (4) inches with two (2) collars and retaining rings. Two (2) required per car.

$107.29/pr.
Made to Order Takes 1-2 Days
Vacuum brake cylinder boot

p/n: 70-0010-24

Boot, vacuum brake cylinder. Made from durable rubber to original configuration.

$106.69/ea.
In Stock
Cadillac Motors pedal pad

p/n: 70-0076-22

Cadillac Motors pedal pads. Authentic straight diamond pattern. Especially good copy, fine detail.

$97.29/pr.
In Stock
Motor mount pad

p/n: 70-1162-11

Pads, front motor mounting. For Cadillac V-8 see our #70-1161-11.

$97.29/pr.
In Stock
Firewall grommet kit

p/n: 70-1149-21

Grommets, firewall, intended for spark and choke rods, fuel line, oil gauge line and radiator brace rods. Six (6) piece set.

$96.79/set
Made to Order Takes 4 Days
Shock and stabilizer seal

p/n: 70-1184-33

Seals, shock absorber and rear stabilizer link. Eight (8) piece set.Width: 1.1875 inches.

$95.99/set
In Stock
Side mount spare grommet kit

p/n: 70-1136-37

Grommet set, spare wheel fender mount, for various applications to support arms, brace rods and cowl standoff posts. Six (6) piece set.

$94.19/set
Made to Order Takes 4 Days
Hood ventilator bumper kit

p/n: 70-0011-42

Pad set, hood vent door open limit. Set of twenty (20) pads for one (1) hood, including split rivets for installing.

$92.59/set
Made to Order Takes 2-3 Days
Fender welting 1/4" bead 50ft

p/n: 70-1098-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide. One fourth (1/4) inch bead, fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty five

$79.49/ea.
In Stock
Fender welting 3/16 bead 50ft

p/n: 70-1100-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide, three sixteenths (3/16) inch, fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty fi

$79.49/ea.
In Stock
Fender welting 50ft chrome

p/n: 70-1102-44

Welting, fender, bright chrome vinyl, three sixteenths (3/16) inch bead, one and one half (1-1/2) inch width. Superior quality. Fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty five (25) foot roll see #70-1101-44.

$79.49/ea.
In Stock
Radiator brace filler strip

p/n: 70-0020-31

Filler strip, radiator brace rods. Retains ignition wire and thermometer tube in hollow brace rods. Thirty (30) inch strips.

$74.89/pr.
In Stock
Vacuum brake rod cover seal

p/n: 70-0327-24

Cover seal, vacuum brake valve operating rod.

$65.39/ea.
In Stock
Steering column grommet

p/n: 70-0007-36

Grommet, steering column at floor.

$65.19/ea.
Made to Order Takes 1-2 Days
Spare tire bumper

p/n: 70-0025-37

Pad, spare wheel standoff post at cowl.

$64.29/pr.
Made to Order Takes 1-2 Days
Coil wire sleeve

p/n: 70-0109-21

Sleeve, coil wire to distributor. Fluted to match upper water hoses rubber only. V-12 & V-16 with coils mounted in radiator, V-8 with coils mounted horizontally on brace rods.

$53.79/ea.
Made to Order Takes 1-2 Days
Headlight stanchion pad

p/n: 70-0255-21

Mounting pads, horn and headlight stanchion base to hood latch shelf. Two and one half (2-1/2) inches by four and one fourth (4-1/4) inches.Length: 4.

$52.99/pr.
In Stock
Taillight gasket

p/n: 70-0258-15

Gaskets, taillight mounting under fender wire conduit base.Width: 3.25 inches.

$52.99/pr.
Made to Order Takes 1-2 Days
Inner Fender Seal

p/n: 60-0288-45

Inner Fender Seal for anti-rattle, runningboard apron to body, or fender splash panels. Nine sixteenths (9/16) inch by seven eighths (7/8) inch slotted sponge rubber to accept rivets. Sold in eight (8) foot strips.

$50.79/ea.
In Stock
Body mounting pad

p/n: 70-0299-48

Pad, body mounting, for body bracket. Two (2) collars and retaining rings. Four (4) per car.

$47.39/ea.
In Stock
Fender welting 1/4" bead 25ft

p/n: 70-1097-44

Welting, fender. Superior quality, proper construction of reinforced vinyl over vinyl core, one and three eighths (1-3/8) inch wide, black only. One fourth (1/4) inch bead, twenty five (25) foot roll. Typically used to attach two (2) fenders to body. For

$46.99/ea.
In Stock
Fender welting 25ft chrome

p/n: 70-1101-44

Welting, fender, bright chrome vinyl, three sixteenths (3/16) inch bead, one and one half (1-1/2) inch width. Superior quality. Twenty five (25) foot roll. Typically used to attach two (2) fenders to body. For fifty (50) foot roll see our #70-1102-44.

$46.99/ea.
In Stock
Starter pedal pad

p/n: 70-1182-18

Pad, starter pedal. Original pattern. Round style.

$46.99/ea.
In Stock
Fender welting 3/16 bead 25ft

p/n: 70-1099-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide, three sixteenths (3/16) inch, twenty five (25) foot roll. Typially used for attaching two (2) fenders to body. For f

$45.19/ea.
In Stock
Wiring grommet

p/n: 70-0410-21

Grommets, horn wire exit from horn motor cover.

$44.99/pr.
In Stock
Steel sash channel

p/n: 70-0641-58

Sash channel, side window glass. U-shaped steel channel only, no filler. Will require that you attach your own window regulator cam to underside as required.

$42.29/ea.
In Stock
Headlight badge bar bushing

p/n: 70-0115-14

Bushing, headlight to badge bar.

$40.39/pr.
Made to Order Takes 1-2 Days
Luggage rack pad

p/n: 70-0107-46

Pad, luggage rack to rear apron.

$37.59/pr.
In Stock
Body mounting pad

p/n: 70-0297-48

Pad, body mounting. Three eighths (3/8) inch by two (2) inch by three (3) inch with collar and retainer ring.

$36.89/ea.
In Stock
Body bolt cushion

p/n: 70-0265-48

Cushion for body bolts, for use in metal cups. Fully molded rubber. One and one half inch (1 1/2") outside diameter by seven sixteenths inch (7/16') inside hole diameter by one and one fourth inch (1 1/4") height.

$20.69/ea.
In Stock
Battery clamp cover

p/n: 70-0095-21

Cover, battery clamp. Control unsightly sulfate buildup. Help protect the nearby metal and finish. Good copy from original part.Length: 3.5 inches.

$20.39/ea.
In Stock
Door handle ferrule

p/n: 70-0111-69

Ferrule, for three fourths (3/4) inch outside door handle. Chrome plated brass. (See #70-0009-69 for grommet). Used for outside door handle or outside trunk handle.

$16.69/ea.
In Stock
Door bumper

p/n: 70-1154-71

Pad, door jamb, rear door fender cut out. One and one half (1-1/2) inch outside diameter, seven eighths (7/8) inch plug.

$15.39/ea.
In Stock
Door check link rod end stop

p/n: 70-0326-70

End stop and pad, door check link rod. Rubber with embedded steel plate, five sixteenths (5/16) inch diameter thread. Most models with rod type door checks.

$13.99/ea.
In Stock
Dimmer switch grommet

p/n: 40-0083-88

Grommet, dimmer switch for carpet application.

$11.99/ea.
In Stock
Coil wire sleeve

p/n: 70-1179-21

Sleeve, coil wire to distributor. Fluted to match upper water hoses rubber only.

$10.69/ea.
In Stock