Search Results

89 items found matching 1936 Oldsmobile Model F 2 door Coupe - 5 Passenger
The listing below contains just short, abbreviated descriptions.
Please click on the part name in red in order to get a complete description.
Side window run channel kit

p/n: 90-0140-58

This eight (8) piece kit includes the inner and outer windowfelts, upper rigid run channels, and flexible run channels needed to complete two (2) doors. Used for front or rear doors in models with vent windows in the door. Models with wood in the doors use our #70-1168-58 as lower rigid run channel.

$236.10/set
$212.50/set
10% discount
Kit
Front Door Vent Window Kit

p/n: 90-0354-90

This front door vent window weatherstrip kit is a four (4) piece set that contains the main vent window seals and division post seals. All of the pieces were designed from original parts for a precise, factory fit.

$192.40/set
$182.80/set
5% discount
Kit
Front Door Vent Window Weatherstrips

p/n: 38-0013-55

These front door vent window weatherstrips are the main seals needed to replace the rubber on your vent windows. They are designed and molded from original parts for superior fitment and seal.

$177.50/pr.
In Stock
Motor mount service

p/n: 25-0064-11

Motor mount, rear. Revulcanization service only.Length: 4.0 inches.

$158.70/pr.
Call or Email
Ferrule installing tool

p/n: 70-0662-69

Installing tool, door and trunk handle ferrule. For cars and trucks using door and trunk handle ferrules such as our #70-0111-69.

$145.40/ea.
In Stock
Rumbleseat step pad

p/n: 25-0018-44

Step, rumbleseat fender with molded-in studs.Length: 6.375 inches.

$137.20/ea.
Made to Order Takes 2-3 Days
Front suspension service

p/n: 70-0754-32

Bumper, front suspension on shock absorber arm. Revulcanization service only.Width: 2.125 inches. Height: 3.0 inches.

$133.50/pr.
Call or Email
Windshield Gasket

p/n: 60-0432-50

This windshield gasket is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the front glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation.

$124.40/ea.
In Stock
Motor mount service 6 cylinder

p/n: 70-0670-11

Support (insulator), motor, lower front. Revulcanization service only.Length: 3.375 inches. Width: 1.625 inches.

$122.00/ea.
Call or Email
Rear Window Gasket

p/n: 70-0687-81

This rear window gasket is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the back glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation.

$111.90/ea.
In Stock
Front Door weatherstrip

p/n: 90-1822-72

Door edge weatherstrip. This part is the primary door to body weatherstrip.

$106.10/set
In Stock
Axle rebound pad

p/n: 70-0233-35

Spring bumper, rear axle. Fastens to spring clamp.

$102.40/pr.
Made to Order Takes 1-2 Days
Rumbleseat Weatherstrip

p/n: 25-0025-85

This rumbleseat weatherstrip set is designed from original parts for superior fitment and seal. The set contains the pieces for the lower edge and corners.

$102.40/set
Made to Order Takes 4 Days
Brown accelerator service

p/n: 25-0050-89

Pad, accelerator pedal. Exact copy in brown rubber. Revulcanization service only.Color:brown Length: 9.0 inches.

$94.60/ea.
Call or Email
Windshield division bar gasket

p/n: 50-0301-51

Gasket set, windshield division post, inner and outer, also acts as retainer for outer division bar chrome molding.

$90.80/set
In Stock
Trunk Weatherstrip

p/n: 70-1128-84

This trunk weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk lid.

$90.50/ea.
In Stock
Motor mount service

p/n: 70-0669-11

Support (insulator), motor, upper front. Revulcanization service only.Length: 4.375 inches. Width: 2.25 inches.

$86.30/ea.
Call or Email
Hood corner pad

p/n: 25-0052-42

Pad, hood corner front or rear. Made with metal core.Length: 2.25 inches. Width: 1.5 inches.

$84.70/pr.
In Stock
Trunk Weatherstrip

p/n: 70-1129-84

This trunk weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk lid.

$82.70/ea.
In Stock
Fender welting 1/4" bead 50ft

p/n: 70-1098-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide. One fourth (1/4) inch bead, fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty five

$76.30/ea.
In Stock
Fender welting 3/16 bead 50ft

p/n: 70-1100-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide, three sixteenths (3/16) inch, fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty fi

$76.30/ea.
In Stock
Fender welting 50ft chrome

p/n: 70-1102-44

Welting, fender, bright chrome vinyl, three sixteenths (3/16) inch bead, one and one half (1-1/2) inch width. Superior quality. Fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty five (25) foot roll see #70-1101-44.

$76.30/ea.
In Stock
Front suspension bumper

p/n: 50-0125-32

Bumper, front suspension, lower arm.Width: 2.625 inches. Height: 2.5625 inches.

$64.10/pr.
In Stock
Brown brake and clutch pad

p/n: 25-0024-89

Pads, brake and clutch pedal, authentic type ribbing, proper size, top quality rubber. Brown rubber. For black see our #25-0024-22.

$59.50/pr.
In Stock
Fuel neck grommet

p/n: 25-0012-41

Grommet, fuel filler neck.

$59.50/ea.
Made to Order Takes 1-2 Days
Side mount spare wheel grommet

p/n: 25-0028-37

Grommet, sidemount brace rod-through-sheet metal.

$58.90/pr.
Made to Order Takes 1-2 Days
Brake and clutch pedal pad

p/n: 25-0024-22

Pads, brake and clutch pedal, authentic type ribbing, proper size, top quality rubber. Black rubber. For brown see our #25-0024-89.Length: 3.125 inches.

$57.80/pr.
In Stock
Door weatherstrip

p/n: 70-0229-73

Weatherstrip, front door upper hinge, brass core as original.

$54.10/pr.
In Stock
Rigid Run Channel

p/n: 70-0347-58

Channel, rigid run, window division bar. Stainless beaded edge, mohair-lined, exact replacement for rear side of division bar.

$52.10/pr.
In Stock
Flexible Run Channel 6 Foot

p/n: 70-1239-58

Window run channel with stainless beaded edge. Six (6) foot length. Cloth covered, mohair lined, flexible channel for sides and top of door windows. Exact replacement for listed vehicles but can be used in many applications.

$48.20/ea.
In Stock
Brown gearshift boot

p/n: 50-0035-89

Boot, gearshift. Brown rubber. For black see our #50-0035-24.Color:brown Width: 2.8125 inches.

$46.40/ea.
Made to Order Takes 1-2 Days
Cowl Vent Weatherstrip

p/n: 70-0224-54

Weatherstrip, cowl vent. Original solid rubber configuration, not a sponge substitute. A top quality part for your classic vehicle restoration.

$46.30/ea.
In Stock
Flexible Run Channel 5 Foot

p/n: 70-1238-58

Window run channel, stainless beaded edge. Cloth covered, mohair lined flexible metal channel for sides and top of door windows. Perfect dimensions, Five eighths (5/8) inch wide by nine sixteenths (9/16) inch overall height, exact replacement. Five (5) fo

$44.30/ea.
In Stock
Fender welting 1/4" bead 25ft

p/n: 70-1097-44

Welting, fender. Superior quality, proper construction of reinforced vinyl over vinyl core, one and three eighths (1-3/8) inch wide, black only. One fourth (1/4) inch bead, twenty five (25) foot roll. Typically used to attach two (2) fenders to body. For

$43.40/ea.
In Stock
Fender welting 25ft chrome

p/n: 70-1101-44

Welting, fender, bright chrome vinyl, three sixteenths (3/16) inch bead, one and one half (1-1/2) inch width. Superior quality. Twenty five (25) foot roll. Typically used to attach two (2) fenders to body. For fifty (50) foot roll see our #70-1102-44.

$43.40/ea.
In Stock
Fender welting 3/16 bead 25ft

p/n: 70-1099-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide, three sixteenths (3/16) inch, twenty five (25) foot roll. Typially used for attaching two (2) fenders to body. For f

$41.80/ea.
In Stock
Steel sash channel

p/n: 70-0641-58

Sash channel, side window glass. U-shaped steel channel only, no filler. Will require that you attach your own window regulator cam to underside as required.

$39.10/ea.
In Stock
Rumbleseat step mounting pad

p/n: 25-0019-44

Mounting pad for our #25-0018-44 fender step.Length: 7.375 inches.

$38.40/ea.
Made to Order Takes 1-2 Days
Gearshift boot

p/n: 50-0035-24

Boot, gearshift. Black rubber. For brown see our #50-0035-89.Width: 2.8125 inches.

$34.00/ea.
Made to Order Takes 1-2 Days
Horn trumpet grommet

p/n: 70-0302-21

Grommets, horn projector. For under hood horn brackets. Two (2) per car.

$27.20/pr.
In Stock
Starter pedal pad

p/n: 25-0049-89

Pad, starter pedal. Original pattern, brown rubber, exact copy.Height: .50 inches.

$26.10/ea.
In Stock
Windshield division bar gasket

p/n: 70-0059-51

Gasket, set, inner and outer, for divided windshield center post. Two (2) piece set.

$25.60/set
In Stock
Rear Spring Pad

p/n: 70-0191-32

Pad, rear spring insulator for two (2) inch wide springs. (see our number 70-0245-32 for two and one fourth (2-1/4) inch springs). Cloth reinforced. Four (4) per vehicle.

$23.90/ea.
In Stock
Battery clamp cover

p/n: 70-0095-21

Cover, battery clamp. Control unsightly sulfate buildup. Help protect the nearby metal and finish. Good copy from original part.Length: 3.5 inches.

$18.80/ea.
In Stock
Door handle ferrule

p/n: 70-0111-69

Ferrule, for three fourths (3/4) inch outside door handle. Chrome plated brass. (See #70-0009-69 for grommet). Used for outside door handle or outside trunk handle.

$15.40/ea.
In Stock
Vent Window Division Bar Weatherstrip

p/n: 70-0040-56

Vent window division post seal. Extruded thirty (30") inch rubber strip that may have to be glued to your old original division post seal core, or directly to the division post.

$14.90/ea.
In Stock
Wiper transmission gasket

p/n: 70-1196-53

Mounting gasket, windshield wiper transmission.Width: 2.5 inches.

$14.40/pr.
In Stock
Door check link rod end stop

p/n: 70-0326-70

End stop and pad, door check link rod. Rubber with embedded steel plate, five sixteenths (5/16) inch diameter thread. Most models with rod type door checks.

$13.00/ea.
In Stock
Rear stabilizer bushing

p/n: 70-0905-33

Bushing, rear stabilizer ends. Four (4) required per car. Fully molded rubber. One and one eighths inch (1 1/8") top outside diameter by seven eighths inch (7/8") bottom outside diameter by nine sixteenths inch (9/16") inside hole diameter by one and one

$12.00/ea.
In Stock
Shock and stabilizer bushing

p/n: 50-0220-32

Bushing, for shock absorber link cross pin or stabilizer link cross pin.1931-36 Bushing, rubber, for shock absorber link cross pin, #41151.

$11.90/ea.
In Stock
Dimmer switch grommet

p/n: 40-0083-88

Grommet, dimmer switch for carpet application.

$11.00/ea.
In Stock
Masticated rubber sheet

p/n: 70-0645-45

Masticated sheet. Three thirty seconds (3/32) inch thick rubber sheet containing random milled cotton cord reinforcement for front end splash aprons, etc. This product is a four (4) foot wide roll, and will only be sold in four (4) square foot multiples

$10.80/sqf
In Stock
Shock absorber bushing

p/n: 50-0087-33

Bushing, Delco type, shock absorber link. One and five sixteenths (1-5/16) inch outside diameter, seven sixteenths (7/16) inch inside diameter.

$10.30/ea.
In Stock
Coil wire sleeve

p/n: 70-1179-21

Sleeve, coil wire to distributor. Fluted to match upper water hoses rubber only.

$9.80/ea.
In Stock
Side window run channel

p/n: 70-1168-58

Channel, side window, pre-flocked, five sixteenths (5/16) inch wide base for one fourth (1/4) inch glass. Most Fisher closed bodies except those using stainless beaded channel. For nine sixteenths (9/16) inch wide channel, see our #70-1169-58.

$9.80/ft.
In Stock
Side window run channel

p/n: 70-1169-58

Channel, side window, pre-flocked, nine sixteenths (9/16) inch wide to accommodate metal frame side window.

$9.70/ft.
In Stock
Door bumper

p/n: 70-1159-71

Pad, door side bumper. Clip retained.

$9.40/ea.
In Stock
Fabric hood lacing

p/n: 70-2221-42

Lacing, hood, fabric, webbing anti-squeak. DOES NOT have hollow center. Fasten with rivets if so found originally. Excellent quality.

$8.10/ft.
In Stock
Fabric hood lacing

p/n: 60-0578-42

Lacing, hood, fabric, webbing anti-squeak. With hollow center to receive wire if needed, or fasten with rivets if so found originally. Excellent quality. Seven eighths (7/8) inch by one eighths (1/8) inch thick.

$8.10/ft.
In Stock
Door bumper

p/n: 34-0025-42

Bumper, front and rear body hinge pillar, one (1) inch diameter by one fourth (1/4) inch thick, held by screw, steel core. Auxiliary, used only where needed to prevent door rattle.Note: also used on 1942-50 Packards with Clipper styling near t

$7.90/ea.
In Stock
Door check link rod end stop

p/n: 70-0384-70

Rubber washer, door check link stop.

$7.70/ea.
In Stock
Door bumper

p/n: 34-0131-37

Bumper, front door above the upper hinge on the upper radius of the door. Stiff-backed, retained by screw, mounted on door only.

$7.40/ea.
In Stock
Spark plug grommet

p/n: 70-1181-21

Grommet, spark plug and coil wire at distributor cap outlets. For seven (7mm) millimeter, later years.

$7.20/ea.
In Stock
Brown door lock knob

p/n: 70-0660-70

Knob or push button for inside door lock, fits over 1/8" steel rod to door lock. Hard brown rubber, may be lacquered other colors as required.

$7.00/ea.
In Stock
Door handle grommet

p/n: 70-0009-69

Grommet, for outside door handle ferrule (our #70-0111-69, ordered separately). Molded rubber with cloth covering per original.

$7.00/ea.
In Stock
Spark plug grommet

p/n: 70-1180-21

Grommet, spark plug & coil wire at distributor cap outlets. For nine (9mm) millimeter wire, earlier years.

$6.80/ea.
In Stock
Steering knuckle support seal

p/n: 50-0199-35

Seal, steering knuckle support, upper pivot pin. Four (4) required per car.Height: .5 inches.

$6.50/ea.
In Stock
Brown door lock knob

p/n: 70-0354-70

Knob for inside door lock control rod. Neutral brown color rubber, 3/32 inch hole. See also our #70-0660-70.

$6.30/ea.
In Stock
Door check link rod end stop

p/n: 70-0325-70

Pad, door check link. For rod type door check. One (1) inch diameter by three eighths (3/8) inch thick with five sixteenths (5/16) inch hole.

$6.10/ea.
In Stock
Brake cable anti-rub cover

p/n: 70-1701-24

Anti-rub cover, brake cable. Fits all models with seven sixteenths (7/16) inch outside diameter cable.Width: 2.0 inches.

$5.90/ea.
In Stock
Pressure ring

p/n: 70-0261-69

Pressure ring (washer), sponge rubber, interior door handle and window regulator escutcheon. One and three fourths (1-3/4) inches outside diameter by three eighths (3/8) inch thick.

$5.90/ea.
In Stock
Channel filler weatherstrip

p/n: 70-0075-57

Channel pad, window carrier, incorporating weatherstrip. Used for some side window lower channel.Width: .375 inches. Height: .6875 inches.

$5.80/ft.
In Stock
Universal mounting pad

p/n: 70-0308-17

Mounting pad, continuous for lights, hinges, brackets, and other bright work when no molded pad is available.

$5.80/ft.
In Stock
Body hole plug

p/n: 35-0863-45

Plug, body sheet metal holes. Used in various places (like trunks). For one and one half (1-1/2) inch hole in body.

$5.70/ea.
In Stock
Side window bumper

p/n: 60-0195-62

Anti-rattle, side window, inner and outer. Fits slot in outer door body metal and inner window frame (garnish molding).Width: .75 inches. Height: .

$5.50/ea.
In Stock
Door weatherstrip

p/n: 70-0066-73

Seal, door bottom, held by metal track or by clips. (See our # 70-0391-73 for clips). 2 door styles need about seven (7) foot per car.

$5.49/ft.
In Stock
Channel filler weatherstrip

p/n: 70-0241-57

Weatherstrip, side window, double-lip seal type, used as filler for one fourth (1/4) inch glass in metal carrier channel.Width: .375 inches. Height: .

$5.40/ft.
In Stock
Window weatherstrip

p/n: 70-1191-52

Gasket, window, for models without chrome reveal molding.

$5.40/ft.
In Stock
Sash channel filler 1/16 cork

p/n: 70-1115-57

Filler strip, window glass sash channel. One sixteenths (1/16) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherstrip type of filler. This is the highest quality linen back, rubber cork composition on

$4.69/ft.
In Stock
Sash Channel Filler 1/16 Rubber

p/n: 70-2170-57

Filler strip, window glass sash channel. One sixteenths (1/16) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherlip type of filler. This is the highest quality rubber like polymer designed for settin

$4.29/ft.
In Stock
Sash channel filler 1/32 cork

p/n: 70-1114-57

Filler strip, window glass sash channel. One thirty seconds (1/32) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherlip type of filler. This is the highest quality linen back, rubber cork composition

$3.99/ft.
In Stock
Sash Channel Filler 1/32 Rubber

p/n: 70-2169-57

Filler strip, window glass sash channel. One thirty seconds (1/32) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherlip type of filler.

$3.99/ft.
In Stock
Door top seal

p/n: 70-0065-73

Seal, door top, fits in light metal track, excellent copy. Two (2) door styles need about five (5) foot per door.

$3.50/ft.
In Stock
Side window weatherstrip

p/n: 70-0064-57

Seal, lower side window. Fastens to inner face of door to seal against outer side of glass. Also used as weatherstrip on crank-up windshield tops.

$3.40/ft.
In Stock
Side window weatherstrip

p/n: 70-0079-58

Weatherstrip, side window lower edge, retained in metal flap on side of carrier channel, seals out water when window is cranked up.Width: .375 inches.

$3.40/ft.
In Stock
Shock Absorber Arm Bushing

p/n: 60-0216-33

Bushing, for double acting shock absorber arm link. Height: .78125 inches.

$2.60/ea.
In Stock
Trunk or hood bumper

p/n: 34-0203-42

Bumper, trunk or hood. Molded with clearance for screw. Used for: Buick 1942-50 Bumper for trunk. Chevrolet 1949-55 Bumper for rear hood corners on cowl. Chevrolet 1949-50 Bumper for trunk. Oldsmobile 1938 Bumper under hood corner on radi

$2.60/ea.
In Stock
Door weatherstrip fastener

p/n: 70-0391-73

Clip, door bottom weatherstrip retaining, for our #70-0066-73 lower door weatherstrip, to fit one fourth (1/4) inch holes. Doors usually require one clip per every six (6) inches. Estimate needs accordingly.

$2.50/ea.
In Stock
Standard bumper

p/n: 33-0136-42

Bumper, standard. See detail page for specific usage.

$2.50/ea.
In Stock