Need Assistance?

We are here to help.

Call 800-447-0849

Search Results

115 items found matching 1937 Buick Special 2 door Convertible
Running Board Matting

p/n: 50-0145-49

Matting, running board. Special original design molded in solid aluminum molds, right and left. Size includes stock for apron riser and outer radius.

$905.99/set
Made to Order Takes 5-7 Days
Motor mount service

p/n: 50-0235-11

Motor mount, rear. Revulcanization service only.

$283.49/pr.
Call or Email
Front Door Vent Window Set

p/n: 90-0445-90

This four (4) piece Front Door Vent Window Set contains the main vent window seals and division post seals. All of the pieces were designed from original parts for a precise, factory fit.

$223.69/set
Kit
Front Door weatherstrip

p/n: 90-0102-72

Door edge weatherstrip. This part is the primary door to body weatherstrip.

$205.29/set
In Stock
Motor mount service

p/n: 50-0234-11

Motor mount, front, upper or lower, as required. Revulcanization service only.

$187.29/pr.
Call or Email
Front Door Vent Window Weatherstrips

p/n: 38-0006-55

These Front Door Vent Window Weatherstrips are the main seals needed to replace the rubber on your vent windows. They are designed and molded from original parts for superior fitment and seal.

$180.89/pr.
Made to Order Takes 5-7 Days
Ferrule installing tool

p/n: 70-0662-69

Installing tool, door and trunk handle ferrule. For cars and trucks using door and trunk handle ferrules such as our #70-0111-69.

$154.59/ea.
In Stock
Windshield Gasket

p/n: 70-0601-50

This Windshield Gasket mounts around the full perimeter of the front glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation.

$135.99/ea.
In Stock
Convertible Front Header Bow Weatherstrip

p/n: 70-0138-64

This convertible soft top Front Header Bow Weatherstrip is designed from the original part for superior fitment and seal. This seal installs directly to the convertible soft top to seal to the windshield, OUTER, right and left. This weatherstrip is molded with necessary pre-drilled end hook and screw openings to the proper clearance.

$123.59/pr.
Made to Order Takes 5-7 Days
Convertible Front Header Bow Weatherstrip

p/n: 70-0157-64

This convertible soft top Front Header Bow Weatherstrip is designed from the original part for superior fitment and seal. This seal installs directly to the convertible soft top to seal to the windshield, INNER, right and left.

$117.79/pr.
Made to Order Takes 5-7 Days
Trunk Weatherstrip

p/n: 70-0796-84

This Trunk Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk lid.

$110.29/ea.
In Stock
Trunk Weatherstrip

p/n: 70-1128-84

This Trunk Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk lid.

$100.99/ea.
In Stock
Detachable center post pad

p/n: 70-0279-67

Pads, for bottom of folding post or body, brass core as original, screw held.Length: 1.875 inches. Width: 1.0625 inches.

$88.69/pr.
Made to Order Takes 5-7 Days
Axle rebound pad

p/n: 50-0230-35

Bumper, rear axle to frame. Two (2) per car.

$86.59/pr.
In Stock
Fender welting 1/4" bead 50ft

p/n: 70-1098-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide. One fourth (1/4) inch bead, fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty five

$85.39/ea.
In Stock
Fender welting 50ft chrome

p/n: 70-1102-44

Welting, fender, bright chrome vinyl, three sixteenths (3/16) inch bead, one and one half (1-1/2) inch width. Superior quality. Fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty five (25) foot roll see #70-1101-44.

$85.39/ea.
In Stock
Fender Welting with 3/16 Bead - 50 Ft. Roll

p/n: 70-1100-44

A superior quality Fender Welting material constructed of reinforced black vinyl over a vinyl core. Typically used for attaching four (4) fenders to body. Sold in a 50 foot roll.

$85.39/ea.
In Stock
Antenna Mount Service

p/n: 50-0280-21

Mount, antenna, insulator shell assembly, running board. Revulcanization service only. Use in conjunction with our # 50-0305-21.

$84.79/pr.
Call or Email
Detachable center post pad

p/n: 70-0280-88

Pads, folding front seat rest, brass core. Also used as bumper, slat iron to compartment on convertibles.Width: 1.375 inches. Height: .28125 inches.

$82.99/pr.
In Stock
Hinge post weatherstrip

p/n: 70-0383-73

Weatherstrip, hinge post at instrument panel. Steel inserts at holes

$82.49/pr.
Made to Order Takes 5-7 Days
Fenderskirt edge seal

p/n: 70-0055-45

Seal, fenderskirt edge. Each five (5) foot long. Similar to our #20-0111-44, but thicker.Length: 60.0 inches. Width: .25 inches.

$80.39/pr.
In Stock
Rumbleseat Weatherstrip

p/n: 70-0282-85

This Rumbleseat Weatherstrip is designed from the original part for superior fitment and seal. The pieces are molded as left and right for the lower corners.

$80.39/pr.
Made to Order Takes 5-7 Days
Front stabilizer bushing

p/n: 50-0227-34

Bushing, front stabilizer shaft bracket. Two (2) per car.

$77.99/pr.
Made to Order Takes 5-7 Days
Brown steering floorplate

p/n: 50-0260-89

Retainer, front floor mat on steering column (also called steering column floorplate). Brown rubber. For black see our #50-0260-36.

$73.39/ea.
In Stock
Windshield Division Bar Gasket

p/n: 70-0159-51

Gasket, windshield division post, inner and outer, also acts as retainer for outer division bar chrome, molding.

$72.19/set
In Stock
Front suspension bumper

p/n: 50-0125-32

Bumper, front suspension, lower arm.Width: 2.625 inches. Height: 2.5625 inches.

$71.79/pr.
In Stock
Door bumper

p/n: 70-0168-71

Bumper, door side. Square type held by four (4) screws, metal core as original.

$69.79/pr.
In Stock
Hood corner pad

p/n: 70-0047-42

Pads, hood corners, rear. Original style with metal core and metal fastening tabs.

$69.79/pr.
In Stock
Hood corner pad

p/n: 50-0036-42

Pads, hood corners, front. Original type with metal core and retaining tab.Width: 1.625 inches.

$69.79/pr.
In Stock
Front bumper grommet

p/n: 50-0041-28

Grommets, front bumper, right and left. Fully molded rubber. Four and three fourths inch (4-3/4") outside length by three inches (3") outside width by one and five eighths inch (1-5/8") inside hole length by one half inch (1/2") inside hole width by one a

$68.59/pr.
In Stock
Rear bumper grommet

p/n: 50-0042-29

Grommets, rear bumper. Fully molded rubber. Four and one fourth inch (4-1/4") outside length by two and three fourths inch (2-3/4") outside width. One and five eighths inch (1-5/8") inside hole length by nine sixteenths inch (9/16") inside hole width by f

$65.99/pr.
In Stock
Front Spring Rubber Bumper

p/n: 70-0329-32

Front Spring Rubber Bumper Pair - for upper control arm on frame.

$64.99/pr.
In Stock
Parking light mounting pad

p/n: 50-0032-16

Mounting pad, parking light.Width: 10.0 inches.

$59.69/pr.
In Stock
Accelerator pedal pad

p/n: 50-0037-40

Pad, accelerator pedal. Slip-over type with heavy retainer lip to fit over original pedal after stripping old rubber off.Length: 8.625 inches.

$58.99/ea.
Made to Order Takes 5-7 Days
Fuel Neck Grommet

p/n: 50-0067-39

Grommet, fuel filler neck. Oblong fully molded rubber. Two and one eighths inch (2-1/8") inch inside length by three and one half inch (3-1/2") outside diameter by three and three fourths inch (3-3/4") outside length.

$58.69/ea.
In Stock
Rigid Run Channel

p/n: 70-0347-58

Stainless beaded edge, mohair-lined, exact replacement for rear side of division bar. Available in 15" pairs.

$58.39/pr.
In Stock
Steering column floorplate

p/n: 50-0260-36

Retainer, front floor mat on steering column (also called steering column floorplate). Black rubber. For brown see our #50-0260-89.Width: 4.3125 inches.

$57.79/ea.
Made to Order Takes 5-7 Days
Beltline Weatherstrip

p/n: 70-0555-58

This Beltline Weatherstrip is sold as a three (3) foot pair. The beltline is used for side window inner and/or outer, front and/or rear doors. Available in a 3ft pair.

$55.49/pr.
In Stock
Automatic choke cable cover

p/n: 50-0243-41

Cover, automatic choke cable at carburetor.

$55.29/ea.
Made to Order Takes 5-7 Days
Taillight Mounting Pad

p/n: 50-0045-15

Taillight mounting pad. Replaces #1299460-1.

$55.29/pr.
In Stock
Vent division bar weatherstrip

p/n: 70-0695-74

Division bar seal. Proper cross section rubber molded to original style metal with authentic attaching tabs. Note: used on front door vent assembly for selected 1937-38 convertible models and rear door vent on selected 1940-42 four door model

$54.69/pr.
In Stock
Brown gearshift boot

p/n: 50-0035-89

Boot, gearshift. Brown rubber. For black see our #50-0035-24.Color:brown Width: 2.8125 inches.

$53.99/ea.
Made to Order Takes 5-7 Days
Brown brake and clutch pad

p/n: 50-0054-89

Pad, brake and clutch pedal. Brown rubber. For black see our part #50-0054-22. Perfect copy, fine detail.Color:brown Width: 3.125 inches.

$52.99/pr.
Made to Order Takes 5-7 Days
Fender welting 1/4" bead 25ft

p/n: 70-1097-44

Welting, fender. Superior quality, proper construction of reinforced vinyl over vinyl core, one and three eighths (1-3/8) inch wide, black only. One fourth (1/4) inch bead, twenty five (25) foot roll. Typically used to attach two (2) fenders to body. For

$51.99/ea.
In Stock
Fender welting 25ft chrome

p/n: 70-1101-44

Welting, fender, bright chrome vinyl, three sixteenths (3/16) inch bead, one and one half (1-1/2) inch width. Superior quality. Twenty five (25) foot roll. Typically used to attach two (2) fenders to body. For fifty (50) foot roll see our #70-1102-44.

$51.99/ea.
In Stock
Sliding Quarter Window Weatherstrip

p/n: 70-0353-78

This Sliding Quarter Window Weatherstrip is used for side window inner and/or outer, front and/or rear doors. Available in a 6ft lengths.

$51.99/ea.
In Stock
Fender Welting with 3/16 Bead - 25 Ft. Roll

p/n: 70-1099-44

A superior quality Fender Welting material constructed of reinforced black vinyl over a vinyl core. Typically used for attaching two (2) fenders to body. Sold in a 25 foot roll.

$49.99/ea.
In Stock
Rumbleseat step mounting pad

p/n: 50-0182-44

Mounting pad, rumbleseat step to fender, proper beaded edge, exact copy.Width: 4.8125 inches.

$46.99/ea.
Made to Order Takes 5-7 Days
Side Window Sash Channel

p/n: 70-0641-58

Sash channel, side window glass. U-shaped steel channel only, no filler. Will require that you attach your own window regulator cam to underside as required.

$46.89/ea.
In Stock
Cowl vent weatherstrip

p/n: 70-0143-54

Gasket, cowl vent. Perfect copy of original, not a sponge substitute, top quality material.

$45.89/ea.
In Stock