Search Results

120 items found matching 1937 Chevrolet Master 2 door Sedan Delivery
The listing below contains just short, abbreviated descriptions.
Please click on the part name in red in order to get a complete description.
Side window run channel kit

p/n: 90-0140-58

This eight (8) piece kit includes the inner and outer windowfelts, upper rigid run channels, and flexible run channels needed to complete two (2) doors. Used for front or rear doors in models with vent windows in the door. Models with wood in the doors use our #70-1168-58 as lower rigid run channel.

$236.10/set
$212.50/set
10% discount
Kit
Front Door Weatherstrip Kit

p/n: 90-0100-72

Front door weatherstrip. This set is the primary seal for the door to the body. Set includes the door perimeter weatherstrip and the door bottom weatherstrip. Enough for two (2) doors. Includes fasteners.

$204.70/set
In Stock
Front Door Vent Window Kit

p/n: 90-0374-90

This front door vent window weatherstrip kit is a four (4) piece set that contains the main vent window seals and division post seals. All of the pieces were designed from original parts for a precise, factory fit.

$194.40/set
$184.70/set
5% discount
Kit
Motor mount service

p/n: 60-0224-11

Engine mount, side (support cushions), right and left. Side frame bracket to clutch housing bracket. Two (2) per car.Width: 2.5 inches. Height: 1.5 inches.

$167.80/pr.
Call or Email
Transmission mount service

p/n: 60-0315-25

Insulator (support), motor at transmission. Revulcanization service only.

$167.30/ea.
Call or Email
Motor mount service

p/n: 60-0296-11

Cushion, engine mount, front. Revulcanization service only.Length: 3.0 inches. Width: 2.125 inches.

$156.60/pr.
Call or Email
Front Door Vent Window Weatherstrips

p/n: 38-0029-55

These front door vent window weatherstrips are the main seals needed to replace the rubber on your vent windows. They are designed and molded from original parts for superior fitment and seal.

$148.30/pr.
In Stock
Ferrule installing tool

p/n: 70-0662-69

Installing tool, door and trunk handle ferrule. For cars and trucks using door and trunk handle ferrules such as our #70-0111-69.

$145.40/ea.
In Stock
Rear spring bumper

p/n: 60-0179-35

Bumper, rear spring on frame. Entire assembly with rubber vulcanized to steel as original.

$132.20/pr.
In Stock
Rear Window Gasket

p/n: 60-0330-81

This rear window gasket is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the back glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation.

$125.30/ea.
In Stock
Windshield Gasket

p/n: 60-0198-50

This windshield gasket is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the front glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation.

$115.40/ea.
In Stock
Windshield Weatherstrip - Vulcanized

p/n: 70-1534-50

This windshield weatherstrip mounts around the full perimeter of the front glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation. One hundred twenty (120") inch loop.

$110.70/ea.
In Stock
Transmission mount service

p/n: 60-0530-25

Insulator, plate assembly, guide, transmission support bracket. Revulcanization service only.Used with our #60-0315-25 from 1940 to 1946..Length: 5.

$101.60/ea.
Call or Email
Fender welting 1/4" bead 50ft

p/n: 70-1098-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide. One fourth (1/4) inch bead, fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty five

$76.30/ea.
In Stock
Fender welting 3/16 bead 50ft

p/n: 70-1100-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide, three sixteenths (3/16) inch, fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty fi

$76.30/ea.
In Stock
Fender welting 50ft chrome

p/n: 70-1102-44

Welting, fender, bright chrome vinyl, three sixteenths (3/16) inch bead, one and one half (1-1/2) inch width. Superior quality. Fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty five (25) foot roll see #70-1101-44.

$76.30/ea.
In Stock
Front spring bumper

p/n: 60-0021-35

Rebound bumper, front spring and rear spring for beam axle cars, steel ring reinforced as original.Height: 2.4375 inches.

$74.70/pr.
In Stock
Taillight mounting pad

p/n: 70-1110-15

Spacer, taillight and license light bracket to body. Right hand. For the left hand version see our #70-1109-15.Length: 4.5 inches.

$71.50/ea.
In Stock
Windshield division bar gasket

p/n: 70-0159-51

Gasket, windshield division post, inner and outer, also acts as retainer for outer division bar chrome, molding.

$64.50/set
In Stock
Fenderskirt edge seal

p/n: 60-0298-45

Seal, wheel streamliner (fenderskirt) to fender. Two (2) strips each cut five (5) foot long.Length: 60.0 inches. Width: .625 inches.

$61.60/pr.
In Stock
Hood to radiator weatherstrip

p/n: 60-0110-42

Anti-squeak, hood-to-radiator ledge, top. Right and left.Length: 10.875 inches.

$61.60/pr.
In Stock
Front bumper grommet

p/n: 70-1104-28

Grommets, front bumper. Fully molded rubber. Two and one half inches (2-1/2") outside length by one and five sixteenths inch (1-5/16") outside width by one and eleven sixteenths inch (1-11/16") inside hole length by nine sixteenths inch (9/16") inside hol

$59.70/pr.
In Stock
Rear bumper grommet

p/n: 60-0143-28

Grommets, rear bumper, curved for good fit. Fully molded rubber. Three and eleven sixteenths inch (3-11/16") outside length by two and three sixteenths inch (2-3/16") outside width by one and eleven sixteenths inch (1-11/16") inside hole length by nine si

$58.60/pr.
In Stock
Brake and Clutch Pedal Pads

p/n: 60-0068-22

Brake and Clutch Pedal Pads - The proper design and fully detailed with ribs extending down over sides of the pad. Length: 3.50 inches. Width: 2.0 inches.

$58.20/pr.
In Stock
Steering column grommet

p/n: 60-0015-36

Grommet, steering column-to-floor, inner. Black. Brass core as original.

$58.20/ea.
In Stock
Access hole plug

p/n: 60-0016-24

Cover, brake master cylinder filler and inspection hole. Metal core as original.

$56.30/ea.
In Stock
Headlight mounting pad

p/n: 60-0413-14

Pad, headlight support bracket. Two (2) required per car.Length: 9.50 inches.

$56.20/pr.
In Stock
Body Anti-Squeak Rubber

p/n: 60-0054-73

Bulb type seal, gravel shield-to-rear bumper, anti-squeak. Also used as a door weatherstrip for some makes and models. Twelve (12) foot strip.

$55.20/ea.
In Stock
Taillight mounting pad

p/n: 70-1109-15

Spacer, rubber, taillight and license light bracket to body. Left hand only was used originally, we also have a right hand version available.

$54.80/ea.
In Stock
Parking light mounting pad

p/n: 60-0204-17

Mounting pad, accessory. Fender parking light.Length: 10.25 inches.

$53.60/pr.
Made to Order Takes 1-2 Days
Rigid Run Channel

p/n: 70-0347-58

Channel, rigid run, window division bar. Stainless beaded edge, mohair-lined, exact replacement for rear side of division bar.

$52.10/pr.
In Stock
Fuel tank support pad

p/n: 60-0026-41

Pad, fuel tank support and floorboard seal. Sponge rubber ring. Two (2) per car.

$49.40/pr.
In Stock
Bowtie emblem pedal pad

p/n: 60-0125-22

Pad, clutch and brake pedal, with Chevy bow tie in tread. Perfect copy, sharp detail.

$48.80/pr.
In Stock
Flexible Run Channel 6 Foot

p/n: 70-1239-58

Window run channel with stainless beaded edge. Six (6) foot length. Cloth covered, mohair lined, flexible channel for sides and top of door windows. Exact replacement for listed vehicles but can be used in many applications.

$48.20/ea.
In Stock
Beltline weatherstrip

p/n: 70-0555-58

Weatherstrip, door window inner and outer, front and rear doors. Seven sixteenths (7/16) inch wide, with chrome bead, mohair faced, flexible. Two (2) three (3) foot strips. Bend to fit.

$47.70/pr.
In Stock
Vent division bar weatherstrip

p/n: 60-0596-56

Front vent window division post seal. Fully molded with metal core and attaching tabs.

$46.10/pr.
In Stock
Hood to radiator weatherstrip

p/n: 60-0111-42

Anti-squeak, hood to radiator ledge, sides. Right and left, self retaining.Length: 12.0 inches.

$44.70/pr.
In Stock
Rear spring bushing

p/n: 60-0311-35

Bushing, rear spring front eye, inlox cartridge type as original.

$44.60/ea.
In Stock
Flexible Run Channel 5 Foot

p/n: 70-1238-58

Window run channel, stainless beaded edge. Cloth covered, mohair lined flexible metal channel for sides and top of door windows. Perfect dimensions, Five eighths (5/8) inch wide by nine sixteenths (9/16) inch overall height, exact replacement. Five (5) fo

$44.30/ea.
In Stock
Accelerator pedal pad

p/n: 60-0097-40

Pad, accelerator pedal. Slip-over type for original core.Length: 9.125 inches.

$44.20/ea.
In Stock
Fender welting 1/4" bead 25ft

p/n: 70-1097-44

Welting, fender. Superior quality, proper construction of reinforced vinyl over vinyl core, one and three eighths (1-3/8) inch wide, black only. One fourth (1/4) inch bead, twenty five (25) foot roll. Typically used to attach two (2) fenders to body. For

$43.40/ea.
In Stock
Fender welting 25ft chrome

p/n: 70-1101-44

Welting, fender, bright chrome vinyl, three sixteenths (3/16) inch bead, one and one half (1-1/2) inch width. Superior quality. Twenty five (25) foot roll. Typically used to attach two (2) fenders to body. For fifty (50) foot roll see our #70-1102-44.

$43.40/ea.
In Stock
Accelerator rod seal

p/n: 60-0136-41

Grommet, accelerator rod through toe board. Brass core and center bushing as original.

$42.80/ea.
In Stock
Fender welting 3/16 bead 25ft

p/n: 70-1099-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide, three sixteenths (3/16) inch, twenty five (25) foot roll. Typially used for attaching two (2) fenders to body. For f

$41.80/ea.
In Stock
Front bumper seal

p/n: 70-1103-28

Seals, front bumper. Fully molded rubber, U-shaped. Three and one half inches (3-1/2") long by three and one half inches (3-1/2") wide by thirteen sixteenths inch (13/16") height. For the grommets see our #70-1104-28, sold separately.

$41.60/pr.
Made to Order Takes 1-2 Days
Steel sash channel

p/n: 70-0641-58

Sash channel, side window glass. U-shaped steel channel only, no filler. Will require that you attach your own window regulator cam to underside as required.

$39.10/ea.
In Stock
Cowl vent weatherstrip

p/n: 70-0143-54

Gasket, cowl vent. Perfect copy of original, not a sponge substitute, top quality material.

$38.30/ea.
In Stock
Brake and clutch pedal bumper

p/n: 60-0024-24

Bumpers, brake and clutch pedal shank to floorboard. Rides pedal shank under floorboard. Compare to our #60-0104-24.Length: 1.8125 inches. Width: .

$37.40/pr.
Made to Order Takes 1-2 Days
Fuel neck grommet

p/n: 60-0022-41

Seal, fuel filler flange. Fully molded rubber, slightly angled. Three and eleven sixteenths inch (3 11/16") outside diameter by two and three sixteenths inch (2-3/16") top hole diameter by two and five eighths inch (2 5/8") bottom hole diameter. One and o

$37.00/ea.
In Stock
Horn button contact cushion

p/n: 60-0192-21

Cushion, standard steering wheel horn button contact. Two and one half (2-1/2) inch diameter.

$36.80/ea.
In Stock
Gearshift boot

p/n: 60-0108-24

Boot, gearshift at floor. Cup style over shifter stick.

$36.00/ea.
In Stock
Horn button contact ring

p/n: 60-0157-21

Ring, horn button contact. Accessory banjo steering wheel. Four and one eighth (4-1/8) inch outside diameter.

$34.70/ea.
In Stock
Horn button contact cushion

p/n: 60-0344-21

Cushion, horn blowing button.Height: 1.0 inches.

$34.10/ea.
In Stock
Battery carrier edge liner

p/n: 60-0112-21

Edge liner, battery carrier cover.Length: 42.0 inches. Width: .25 inches. Height: .6875 inches.

$33.60/ea.
In Stock
Starter pedal bellows

p/n: 60-0487-21

Bellows, starter pedal shaft-to-floorboard. One and three fourths (1-3/4) inch by two and one fourth (2-1/4) inch.Length: 2.25 inches. Width: 1.75 inches.

$32.40/ea.
In Stock
Starter button

p/n: 60-0322-21

Starter button, push on replacement to rod. Two (2) inch outside diameter.

$28.80/ea.
In Stock
Brake master cylinder boot

p/n: 60-0180-24

Boot, brake master cylinder rod. Fits on one and one fourth (1-1/4) inch diameter cylinder. Height: 2.125 inches.

$27.60/ea.
In Stock
Brake And Clutch Pedal Bumper

p/n: 60-0104-24

Bumper, brake and clutch pedal shank, rides under floorboard. One and one eighth (1-1/8) inch clearance for pedal shaft. Compare with our #60-0579-24.

$26.70/pr.
Made to Order Takes 1-2 Days
Firewall grommet

p/n: 60-0013-20

Grommet, wire harness and speedometer cable through toe board.Length: 2.4375 inches. Width: 1.6875 inches.

$23.10/ea.
In Stock
Electrical terminal boot

p/n: 30-0279-41

Boot, electrical connection, generator terminal or ignition coil at engine.

$22.00/ea.
In Stock
Firewall grommet

p/n: 60-0010-45

Grommet, firewall, oblong four (4) hole style. Fits steel retainer for throttle and choke cables, oil and temperature lines.

$22.00/ea.
In Stock
Starter button cover

p/n: 60-0166-21

Cover, starter pedal button. Rubber slip over type for old metal. Two (2) inch outside diameter. If car doesn't have old metal, see our #60-0322-21.

$20.20/ea.
In Stock
Body mounting pad

p/n: 60-0028-48

Pad, front body mounting. Right angle style. Fully molded rubber. Four and one sixteenth inch (4 1/16") length by three and seven eighths inch (3 7/8") width by one half inch (1/2") inside hole diameters by one fourth inch (1/4") height.

$19.60/ea.
Made to Order Takes 2-3 Days
Brown steering column cushion

p/n: 60-0012-89

Grommet, steering column to cowl, for U-bolt clamp. Brown rubber. For black see our #60-0012-36.Color:brown Height: 1.25 inches.

$19.60/ea.
In Stock
Steering column cushion

p/n: 60-0012-36

Grommet, steering column to cowl, for U-bolt clamp. Black rubber. For brown see our #60-0012-89.Height: 1.25 inches.

$18.90/ea.
In Stock
Battery clamp cover

p/n: 70-0095-21

Cover, battery clamp. Control unsightly sulfate buildup. Help protect the nearby metal and finish. Good copy from original part.Length: 3.5 inches.

$18.80/ea.
In Stock
Steering column seal

p/n: 60-0014-36

Seal, steering post-to-toe board. Die cut five sixteenths (5/16) inch sponge.Height: .3125 inches.

$17.50/ea.
In Stock
Exhaust Support Grommet

p/n: 60-0031-13

Grommet, rear and middle muffler hanger.Height: .8125 inches.

$16.30/ea.
In Stock
Firewall grommet

p/n: 70-0158-21

Grommet for ignition switch conduit through firewall.

$15.70/ea.
In Stock
Firewall grommet

p/n: 32-0196-21

Grommet, wire harness through firewall. Sheet Metal Hole: 1-5/16" Center Hole: 5/16" Outside Diameter: 1-11/16" Slot Width: 1/16"

$15.50/ea.
In Stock
Door handle ferrule

p/n: 70-0111-69

Ferrule, for three fourths (3/4) inch outside door handle. Chrome plated brass. (See #70-0009-69 for grommet). Used for outside door handle or outside trunk handle.

$15.40/ea.
In Stock
Spark plug retaining ring

p/n: 30-0352-21

Retaining ring, spark plug wire. Two (2) per car.Chevrolet 1935-48 Retaining ring, spark plug wire. Two (2) per car. All models.

$14.30/pr.
In Stock
Door check link rod end stop

p/n: 70-0326-70

End stop and pad, door check link rod. Rubber with embedded steel plate, five sixteenths (5/16) inch diameter thread. Most models with rod type door checks.

$13.00/ea.
In Stock
Body mounting pad

p/n: 60-0027-48

Pad, side body mounting. Fully molded rubber, rectangular. Two and seven sixteenths inch (2 7/16") outside length by one and eleven sixteenths inch (1 11/16") outside width by one fourth inch (1/4") height. 1940 models are known to use ten (10) of these p

$12.50/ea.
In Stock
Dimmer switch grommet

p/n: 40-0083-88

Grommet, dimmer switch for carpet application.

$11.00/ea.
In Stock
Masticated rubber sheet

p/n: 70-0645-45

Masticated sheet. Three thirty seconds (3/32) inch thick rubber sheet containing random milled cotton cord reinforcement for front end splash aprons, etc. This product is a four (4) foot wide roll, and will only be sold in four (4) square foot multiples

$10.80/sqf
In Stock
Bumper support bar pad

p/n: 60-0544-30

Pad, between bumper support bar and bumper face bar at the mounting bolts. Fully molded rubber. Use as required, eight (8) are needed for most cars. One and fifteen sixteenths inch (1 15/16") outside diameter by one half inch (1/2") inside hole diameter b

$10.60/ea.
In Stock
Loom wiring grommet

p/n: 60-0255-14

Grommet, headlight loom through body sheet metal. Four (4) to six (6) per car.Length: .9375 inches.

$10.50/ea.
In Stock
Wiper transmission gasket

p/n: 60-0029-53

Gasket, windshield wiper transmission mounting. Replaces #4073727.

$10.50/pr.
In Stock
Side window run channel

p/n: 70-1168-58

Channel, side window, pre-flocked, five sixteenths (5/16) inch wide base for one fourth (1/4) inch glass. Most Fisher closed bodies except those using stainless beaded channel. For nine sixteenths (9/16) inch wide channel, see our #70-1169-58.

$9.80/ft.
In Stock
Side window run channel

p/n: 70-1169-58

Channel, side window, pre-flocked, nine sixteenths (9/16) inch wide to accommodate metal frame side window.

$9.70/ft.
In Stock
Fabric hood lacing

p/n: 60-0578-42

Lacing, hood, fabric, webbing anti-squeak. With hollow center to receive wire if needed, or fasten with rivets if so found originally. Excellent quality. Seven eighths (7/8) inch by one eighths (1/8) inch thick.

$8.10/ft.
In Stock
Fabric hood lacing

p/n: 70-2221-42

Lacing, hood, fabric, webbing anti-squeak. DOES NOT have hollow center. Fasten with rivets if so found originally. Excellent quality.

$8.10/ft.
In Stock
Door bumper

p/n: 34-0025-42

Bumper, front and rear body hinge pillar, one (1) inch diameter by one fourth (1/4) inch thick, held by screw, steel core. Auxiliary, used only where needed to prevent door rattle.Note: also used on 1942-50 Packards with Clipper styling near t

$7.90/ea.
In Stock
Handbrake lever anti-rattle

p/n: 60-0531-24

Spacer, anti-rattle, handbrake lever sector rod, between release rod and handbrake lever.Width: .6875 inches. Height: .6875 inches.

$7.80/ea.
In Stock
Door check link rod end stop

p/n: 70-0384-70

Rubber washer, door check link stop.

$7.70/ea.
In Stock
Door bumper

p/n: 34-0131-37

Bumper, front door above the upper hinge on the upper radius of the door. Stiff-backed, retained by screw, mounted on door only.

$7.40/ea.
In Stock
Side window roller

p/n: 70-0117-62

Anti-rattle roller, side windows. Rubber only, replaces original perfectly and easily. Fits both styles of brackets.

$7.30/ea.
In Stock
Spark plug grommet

p/n: 70-1181-21

Grommet, spark plug and coil wire at distributor cap outlets. For seven (7mm) millimeter, later years.

$7.20/ea.
In Stock
Brown door lock knob

p/n: 70-0660-70

Knob or push button for inside door lock, fits over 1/8" steel rod to door lock. Hard brown rubber, may be lacquered other colors as required.

$7.00/ea.
In Stock
Door handle grommet

p/n: 70-0009-69

Grommet, for outside door handle ferrule (our #70-0111-69, ordered separately). Molded rubber with cloth covering per original.

$7.00/ea.
In Stock
Spark plug grommet

p/n: 70-1180-21

Grommet, spark plug & coil wire at distributor cap outlets. For nine (9mm) millimeter wire, earlier years.

$6.80/ea.
In Stock
Brown door lock knob

p/n: 70-0354-70

Knob for inside door lock control rod. Neutral brown color rubber, 3/32 inch hole. See also our #70-0660-70.

$6.30/ea.
In Stock
Door check link rod end stop

p/n: 70-0325-70

Pad, door check link. For rod type door check. One (1) inch diameter by three eighths (3/8) inch thick with five sixteenths (5/16) inch hole.

$6.10/ea.
In Stock
Brake cable anti-rub cover

p/n: 70-1701-24

Anti-rub cover, brake cable. Fits all models with seven sixteenths (7/16) inch outside diameter cable.Width: 2.0 inches.

$5.90/ea.
In Stock
Door Weatherstrip (Sponge Rubber Extrusion - General Use)

p/n: 70-0411-73

Door edge weatherstrip made from high quality EPDM sponge rubber. Excellent for use on many different vehicle models.

$5.90/ft.
In Stock
Pressure ring

p/n: 70-0261-69

Pressure ring (washer), sponge rubber, interior door handle and window regulator escutcheon. One and three fourths (1-3/4) inches outside diameter by three eighths (3/8) inch thick.

$5.90/ea.
In Stock
Shock absorber arm bushing

p/n: 60-0106-32

Bushing, shock absorber arm link.

$5.90/ea.
In Stock
Channel filler weatherstrip

p/n: 70-0075-57

Channel pad, window carrier, incorporating weatherstrip. Used for some side window lower channel.Width: .375 inches. Height: .6875 inches.

$5.80/ft.
In Stock
Universal mounting pad

p/n: 70-0308-17

Mounting pad, continuous for lights, hinges, brackets, and other bright work when no molded pad is available.

$5.80/ft.
In Stock