Search Results

87 items found matching 1937 Packard 115 2 door Convertible
The listing below contains just short, abbreviated descriptions.
Please click on the part name in red in order to get a complete description.
Runningboard matting

p/n: 30-0218-49

Runningboard matting for Model 115C only. Made from the molded runningboard matting for the 120's (our #30-0214-49).

$852.10/set
Made to Order Takes 1-2 Days
Suspension bushing

p/n: 30-0386-36

Bushing and pin assembly cartridge. Inlox type, front wheel lower support arm inner pin. Shipped with instructions for reinstalling.Length: 5.75 inches.

$294.60/pr.
In Stock
Motor mount service

p/n: 30-0360-11

Support assembly, rear motor mount. Revulcanization service only.

$292.20/pr.
Call or Email
Front suspension bumper

p/n: 30-0228-32

Bumper assembly, front suspension inside coil spring, with five sixteenths (5/16) inch threaded studs as found originally.

$189.40/pr.
In Stock
Front Door Vent Window Weatherstrips

p/n: 30-0098-55

These front door vent window weatherstrips are the main seals needed to replace the rubber on your vent windows. They are designed and molded from original parts but both strips need to be cut in to three (3) sections to facilitate installation. Instruction sheet included showing how to make a six (6) piece set.

$185.20/pr.
In Stock
Front spring bushing

p/n: 30-0393-32

Bushing assembly, front wheel support; upper and outer. Inlox type cartridge bushing assembly.

$184.90/pr.
In Stock
Spring eye bushing

p/n: 70-1838-32

Bushing, front eye of rear spring.Length: 2.50 inches.

$159.40/pr.
In Stock
Side roof rail weatherstrip

p/n: 30-0031-65

Weatherstrip, side window. Fits metal channel. Rubber only. Twelve (12) foot strip.Length: 144.0 inches. Width: .75 inches.

$139.50/ea.
Made to Order Takes 3 Days
Transmission stabilizer

p/n: 30-0252-24

Stabilizer, fore and aft transmission to frame. A factory service part used to remedy clutch chatter. Steel core as original.Length: 7.50 inches.

$130.90/ea.
Made to Order Takes 2-3 Days
Front suspension bushing

p/n: 30-0239-32

Bushings, front suspension torque arm. Necessary for proper front end geometry.

$115.90/pr.
In Stock
Door lock striker service

p/n: 30-0398-71

Striker, door lock, front or rear as specified. Revulcanization service only. Send old complete striker.

$110.60/pr.
Call or Email
Front spring bumper

p/n: 30-0227-32

Bumper assembly, front spring rebound (upper arm). Steel core, with treaded stud just like original.

$108.70/pr.
In Stock
Door weatherstrip

p/n: 30-0085-73

Weatherstrip, door, hollow bulb seal construction to replace composite sponge and solid rubber. Retained by metal clips (not included, see our #70-0391-73).

$106.20/ea.
In Stock
Axle rebound pad

p/n: 30-0054-32

Pads, rear axle rebound.Length: 5.125 inches. Width: 1.4375 inches.

$104.90/pr.
In Stock
Rear bumper grommet

p/n: 30-0159-29

Grommets, rear bumper. Molded right and left as original.Length: 4.875 inches. Width: 3.125 inches.

$99.80/pr.
In Stock
Gearshift boot

p/n: 30-0178-24

Boot, gearshift cover. For cane shifts only.Length: 4.0 inches. Width: 3.0 inches. Height: 5.125 inches.

$95.00/ea.
In Stock
Front bumper grommet

p/n: 30-0077-28

Grommets, front bumper. Molded right and left, including retaining flange. Fully molded rubber. Three and fifteen sixteenths inch (3-15/16") outside length by two and five eighths inch (2-5/8") outside width by one and one half inch (1-1/2") inside hole l

$86.30/pr.
In Stock
Accelerator pedal service

p/n: 30-0400-41

Pedal, accelerator. Revulcanization service only. Includes new ball sockets as original, with correctly detailed tread pattern.Length: 9.625 inches.

$83.80/ea.
Call or Email
Rear bumper grommet

p/n: 30-0047-29

Grommets, rear bumper. For models with luggage racks.Length: 4.125 inches. Width: 3.375 inches.

$79.00/pr.
Made to Order Takes 1-2 Days
Motor mount pad

p/n: 30-0238-11

Cushions, motor support, at timing gear cover. One (1) pair required per car. Sold only in pairs.

$78.30/pr.
In Stock
Front coil spring pad

p/n: 30-0524-32

Insulator, front coil springs.

$76.70/set
In Stock
Fender welting 1/4" bead 50ft

p/n: 70-1098-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide. One fourth (1/4) inch bead, fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty five

$76.30/ea.
In Stock
Fender welting 3/16 bead 50ft

p/n: 70-1100-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide, three sixteenths (3/16) inch, fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty fi

$76.30/ea.
In Stock
Fender welting 50ft chrome

p/n: 70-1102-44

Welting, fender, bright chrome vinyl, three sixteenths (3/16) inch bead, one and one half (1-1/2) inch width. Superior quality. Fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty five (25) foot roll see #70-1101-44.

$76.30/ea.
In Stock
Rigid run channel

p/n: 30-0245-57

Channel, rigid run, for division bar opposite vent windows.

$75.60/pr.
In Stock
Hood corner pad

p/n: 30-0131-42

Pads, hood front corners. 2 rivet type.Length: 3.25 inches.

$72.50/pr.
In Stock
Dashboard anti-rattle

p/n: 30-0025-20

Anti rattle, each end of instrument panel. Beaded edge as original, eight and one half (8-1/2) inch long. Replaces 310708 & 310709.

$71.80/pr.
In Stock
Red brake and clutch pedal pad

p/n: 30-0188-89

Pads, brake and clutch pedal, slip over type. Black and red rubber. For black only see our #30-0188-22.Length: 3.875 inches. Width: 2.875 inches.

$71.70/pr.
In Stock
Headlight mounting pad

p/n: 30-0234-14

Gaskets, headlight stanchion.Length: 11.25 inches.

$71.20/pr.
In Stock
Front fender seal

p/n: 30-0246-44

Liner, front fender to radiator shell.Length: 6.50 inches.

$69.50/pr.
In Stock
Taillight mounting pad

p/n: 30-0230-15

Gaskets, taillight mounting. Proper type lip as original. One and eleven sixteenths (1-11/16) inch by four and one half (4-1/4) inch.Length: 4.25 inches.

$66.20/pr.
In Stock
Brake and clutch pedal pad

p/n: 30-0188-22

Pads, brake and clutch pedal, slip over type. Black rubber only. For black and red (semi-automatic clutch models) see our #30-0188-89.Length: 3.875 inches.

$65.20/pr.
In Stock
Radiator mounting pad

p/n: 30-0309-31

Grommet, several useages. Radiator core cradle tie rod to frame or rear stablizer pad to link to where the leaf springs are bolted. Fully molded rubber. 2nd type with chamfered edge. Comes as a (4) piece set. One and three eighths inch (1 3/8") outside di

$61.30/set
In Stock
Trunk hinge mounting pad

p/n: 30-0200-87

Pads, trunk hinge. Four (4) piece set.

$57.50/set
In Stock
Radiator mounting pad

p/n: 30-0208-31

Pad, radiator lower splasher to grille. Fastens into place with rivets. One four (4) piece set required per car.Length: .875 inches. Width: .875 inches.

$53.30/set
Made to Order Takes 1-2 Days
Fuel neck grommet

p/n: 30-0038-41

Grommet, fuel filler neck.

$52.80/ea.
In Stock
Gearshift knob

p/n: 30-0349-24

Knob, gearshift (floor shift type).

$52.20/ea.
In Stock
Cowl vent gasket

p/n: 30-0179-54

Gasket, cowl vent, original labyrinth type, not sponge.Length: 14.75 inches. Width: 5.50 inches.

$51.50/ea.
In Stock
Beltline weatherstrip

p/n: 70-0555-58

Weatherstrip, door window inner and outer, front and rear doors. Seven sixteenths (7/16) inch wide, with chrome bead, mohair faced, flexible. Two (2) three (3) foot strips. Bend to fit.

$47.70/pr.
In Stock
Rumbleseat step mounting pad

p/n: 30-0271-44

Gasket, rumbleseat step center.Length: 5.875 inches.

$47.60/ea.
Made to Order Takes 1-2 Days
Brake and clutch shank seal

p/n: 30-0143-24

Boot, brake and clutch pedal shank at toe board.Length: 2.9375 inches.

$44.90/pr.
In Stock
Fender welting 1/4" bead 25ft

p/n: 70-1097-44

Welting, fender. Superior quality, proper construction of reinforced vinyl over vinyl core, one and three eighths (1-3/8) inch wide, black only. One fourth (1/4) inch bead, twenty five (25) foot roll. Typically used to attach two (2) fenders to body. For

$43.40/ea.
In Stock
Fender welting 25ft chrome

p/n: 70-1101-44

Welting, fender, bright chrome vinyl, three sixteenths (3/16) inch bead, one and one half (1-1/2) inch width. Superior quality. Twenty five (25) foot roll. Typically used to attach two (2) fenders to body. For fifty (50) foot roll see our #70-1102-44.

$43.40/ea.
In Stock
Rumbleseat step mounting pad

p/n: 30-0272-44

Gasket, rumbleseat step. For left hand drive upper.Length: 5.0 inches.

$43.30/ea.
Made to Order Takes 1-2 Days
Fender welting 3/16 bead 25ft

p/n: 70-1099-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide, three sixteenths (3/16) inch, twenty five (25) foot roll. Typially used for attaching two (2) fenders to body. For f

$41.80/ea.
In Stock
Rumbleseat lid bumper pad

p/n: 30-0275-44

Bumpers, rumbleseat stop bracket. Self retaining type as original.Length: 1.1875 inches. Width: .75 inches. Height: .375 inches.

$41.80/pr.
In Stock
Shock absorber bushing

p/n: 30-0024-33

Bushings, rear shock link assembly. Designed to act like sleeve inside link arm.Height: .9375 inches.

$35.60/pr.
In Stock
Bowdrill cloth tape

p/n: 70-1175-65

Tape, black bowdrill cloth. Adhesive backed, used to create cloth cover surface for side rail weatherstrips typically. Five (5) inches by five (5) foot roll. Pressure sensitive, for covering convertible side window weatherstrip such as our #70-1170-99 or

$32.80/ea.
In Stock
Taillight lens gasket

p/n: 30-0336-15

Gaskets, taillight door lens. For cars without center license light. Two (2) strips eleven and one half (11-1/2) inches long each.Length: 11.5 inches.

$28.90/pr.
In Stock
Shock absorber bushing

p/n: 30-0226-33

Bushings, rear shock link, upper. Rubber sleeve construction like original.

$26.10/pr.
In Stock
Electrical terminal boot

p/n: 30-0279-41

Boot, electrical connection, generator terminal or ignition coil at engine.

$22.00/ea.
In Stock
Battery clamp cover

p/n: 70-0095-21

Cover, battery clamp. Control unsightly sulfate buildup. Help protect the nearby metal and finish. Good copy from original part.Length: 3.5 inches.

$18.80/ea.
In Stock
Door bumper

p/n: 30-0002-71

Bumper, door side. One and one fourth (1-1/4) inch by two (2) inch.Length: 2.0 inches. Width: 1.25 inches.

$16.70/ea.
In Stock
Bowdrill cloth tape

p/n: 70-1172-65

Tape, black bowdrill cloth. Adhesive backed, used to create cloth cover surface for side rail weatherstrips typically. Two and one half (2-1/2) inches by five (5) foot roll. Pressure sensitive, for covering convertible side window weatherstrip such as our

$15.50/ea.
In Stock
Door bumper

p/n: 30-0021-71

Pad, door jamb.Length: 1.50 inches. Width: 1.25 inches.

$14.50/ea.
In Stock
Wiper transmission gasket

p/n: 70-1196-53

Mounting gasket, windshield wiper transmission.Width: 2.5 inches.

$14.40/pr.
In Stock
Brake cable anti-rub cover

p/n: 30-0425-24

Anti-rattle, brake cable at frame.

$13.90/pr.
In Stock
Tan bowdrill cloth tape

p/n: 70-1173-65

Tape, brown (tan) bowdrill cloth. Adhesive backed, used to create cloth cover surface for side rail weatherstrips typically. Two and one half (2-1/2) inches by five (5) foot roll. Pressure sensitive, for covering convertible side window weatherstrip such

$13.90/ea.
In Stock
Door bumper

p/n: 30-0032-71

Pad, for door. Circular shape, one and one fourth (1-1/4) inch diameter.

$13.00/ea.
In Stock
Stabilizer grommet

p/n: 70-0436-33

Grommet, front stabilizer bar link or rear shock link to axle. Fully molded rubber. Eight (8) required per car. One and one fourth inch (1 1/4") outside diameter by one half inch (1/2") inside hole diameter by seven eighths inch (7/8") height. Used as a f

$12.10/ea.
In Stock
Door and trunk handle gasket

p/n: 30-0235-71

Pad, outside door handle escutcheon.Length: 2.4375 inches.

$11.70/ea.
In Stock
Masticated rubber sheet

p/n: 70-0645-45

Masticated sheet. Three thirty seconds (3/32) inch thick rubber sheet containing random milled cotton cord reinforcement for front end splash aprons, etc. This product is a four (4) foot wide roll, and will only be sold in four (4) square foot multiples

$10.80/sqf
In Stock
Shock absorber bushing

p/n: 50-0087-33

Bushing, Delco type, shock absorber link. One and five sixteenths (1-5/16) inch outside diameter, seven sixteenths (7/16) inch inside diameter.

$10.30/ea.
In Stock
Firewall retainer

p/n: 30-0207-20

Fastener, firewall insulation. Three fourths (3/4) inch diameter head by one (1) inch long.Height: 1.0 inches.

$7.60/ea.
In Stock
Peel-N-Stick Trunk Weatherstrip

p/n: 30-0356-WT

This trunk weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body. Easy to install 3M Peel-N-Stick backing provides superior adhesion for reliable performance.

$6.60/ft.
In Stock
Trunk Weatherstrip

p/n: 50-0161-85

This weatherstrip was designed from an original part for a specific application but has many uses outside of its original purpose. The seal is structured to be applied to the body of the car.

$6.40/ft.
In Stock
Run channel mohair liner

p/n: 70-2863-58

Liner, mohair. Liner with a rubber backing. Apply with adhesive to division bars and channels. Helps reline guide bars on lock side of hardtops and convertibles.

$6.39/ft.
In Stock
Shock and stabilizer grommet

p/n: 70-0274-33

Grommet, shock and stabilizer link. Eight (8) required per car. Fully molded rubber with locating collar. One and one sixteenth inch (1 1/16") outside diameter by nine sixteenths inch (9/16") locating collar outside diameter by three eighths inch (3/8") i

$6.30/ea.
In Stock
Trunk Weatherstrip (Sponge Rubber Extrusion - General Use)

p/n: 30-0356-85

Trunk weatherstrip made from high quality EPDM sponge rubber. Excellent for use on many different vehicle models.

$6.30/ft.
In Stock
Roof Rail Weatherstrip

p/n: 70-1171-99

Weatherstrip, side roof rail. Thirteen-sixteen inches (13/16") wide. Fits into metal channel retainer.

$5.90/ft.
In Stock
Side roof rail weatherstrip

p/n: 70-0251-65

Weatherstrip, side window. Base fifteen sixteenths (15/16) inch wide but easily trims to more narrow channel if necessary.Width: .9375 inches.

$5.90/ft.
In Stock
Channel filler weatherstrip

p/n: 70-0075-57

Channel pad, window carrier, incorporating weatherstrip. Used for some side window lower channel.Width: .375 inches. Height: .6875 inches.

$5.80/ft.
In Stock
Universal mounting pad

p/n: 70-0308-17

Mounting pad, continuous for lights, hinges, brackets, and other bright work when no molded pad is available.

$5.80/ft.
In Stock
Spring shackle seal

p/n: 70-1125-33

Washer, front and rear spring shackle, seal for shackle pin. Constructed of neoprene.

$5.60/ea.
In Stock
Channel filler weatherstrip

p/n: 30-0507-57

Seal, door window frame, upper and rear. Used on some open models with metal frame around glass.

$5.49/ft.
In Stock
Channel filler weatherstrip

p/n: 70-0241-57

Weatherstrip, side window, double-lip seal type, used as filler for one fourth (1/4) inch glass in metal carrier channel.Width: .375 inches. Height: .

$5.40/ft.
In Stock
Channel filler weatherstrip

p/n: 30-0154-57

Filler, for glass channel for convertible type windows with metal frame around one fourth (1/4) inch glass.Width: .4375 inches. Height: .50 inches.

$5.40/ft.
In Stock
Spare wheel mounting pad

p/n: 30-0446-37

Pad, spare tire inner.Length: .875 inches. Width: .75 inches.

$5.40/ea.
In Stock
Window weatherstrip

p/n: 70-1191-52

Gasket, window, for models without chrome reveal molding.

$5.40/ft.
In Stock
Bijur lubricator spring seal

p/n: 30-0434-32

Seal, spring shackle. For models with Bijur lubrication systems.

$5.30/ea.
In Stock
Sash channel filler 1/16 cork

p/n: 70-1115-57

Filler strip, window glass sash channel. One sixteenths (1/16) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherstrip type of filler. This is the highest quality linen back, rubber cork composition on

$4.69/ft.
In Stock
Sash Channel Filler 1/16 Rubber

p/n: 70-2170-57

Filler strip, window glass sash channel. One sixteenths (1/16) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherlip type of filler. This is the highest quality rubber like polymer designed for settin

$4.29/ft.
In Stock
Sash channel filler 1/32 cork

p/n: 70-1114-57

Filler strip, window glass sash channel. One thirty seconds (1/32) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherlip type of filler. This is the highest quality linen back, rubber cork composition

$3.99/ft.
In Stock
Sash Channel Filler 1/32 Rubber

p/n: 70-2169-57

Filler strip, window glass sash channel. One thirty seconds (1/32) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherlip type of filler.

$3.99/ft.
In Stock
Trunk Weatherstrip (Sponge Rubber Extrusion - General Use)

p/n: 30-0144-87

Trunk weatherstrip made from high quality EPDM sponge rubber. Excellent for use on many different vehicle models.

$2.99/ft.
In Stock
Door weatherstrip fastener

p/n: 70-0391-73

Clip, door bottom weatherstrip retaining, for our #70-0066-73 lower door weatherstrip, to fit one fourth (1/4) inch holes. Doors usually require one clip per every six (6) inches. Estimate needs accordingly.

$2.50/ea.
In Stock
Standard bumper

p/n: 33-0136-42

Bumper, standard. See detail page for specific usage.

$2.50/ea.
In Stock