Need Assistance?

We are here to help.

Call 800-447-0849

Search Results

94 items found matching 1937 Packard Super Eight 2 door Coupe - 4 Passenger
Vibration damper service

p/n: 30-0376-12

Vibration damper, crankshaft, front. Revulcanizing service for rubber cushion elements.

$719.49/ea.
Call or Email
Front Door Vent Window Weatherstrips

p/n: 30-0089-55

These front door vent window seals are designed from the original parts for superior fitment and seal. The pieces are molded as left and right and are one piece with the division post seal.

$325.59/pr.
In Stock
Suspension bushing

p/n: 30-0386-36

Bushing and pin assembly cartridge. Inlox type, front wheel lower support arm inner pin. Shipped with instructions for reinstalling.Length: 5.75 inches.

$300.59/pr.
In Stock
Front suspension bumper

p/n: 30-0490-32

Bumper, front suspension (inside of coil spring). Made with three five sixteenths (5/16) inch studs as original.

$202.69/pr.
Made to Order Takes 2-3 Days
Front spring bushing

p/n: 30-0393-32

Bushing assembly, front wheel support; upper and outer. Inlox type cartridge bushing assembly.

$190.49/pr.
Made to Order Takes 2-3 Days
Door check strap

p/n: 40-0535-70

Strap, door check. T-type, special heavy duty construction of rubber with multiple ply webbing and molded-in steel crossbar. Full length as original with one eighth (1/8) inch by seven eighths (7/8) inch steel crossbar.

$170.39/pr.
In Stock
Windshield Gasket

p/n: 30-0477-50

This windshield gasket is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the front glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation.

$167.19/ea.
Made to Order Takes 2-3 Days
Hood to cowl weatherstrip

p/n: 30-0138-42

Guard strip, hood to cowl. Brass core with molded integral hood rest.Length: 14.875 inches.

$137.89/pr.
In Stock
Motor mount service

p/n: 30-0185-11

Insulator, motor support, rear assembly. Revulcanization service only.

$128.69/ea.
Call or Email
Windshield Gasket Weatherstrip

p/n: 30-0014-52

This windshield gasket weatherstrip comes in a ten foot (10') strip and mounts around the full perimeter of the front glass. It has the slot to accommodate the outer edge's decorative molding and the ends may require trimming and bonding for installation.

$127.39/ea.
Made to Order Takes 3 Days
Hood corner pad

p/n: 30-0130-42

Pads, hood front corners. Large self prong type with metal core molded left and right.Length: 3.375 inches.

$123.19/pr.
Made to Order Takes 2-3 Days
Front suspension bushing

p/n: 30-0239-32

Bushings, front suspension torque arm. Necessary for proper front end geometry.

$119.49/pr.
In Stock
Headlight mounting pad

p/n: 30-0134-14

Pads, headlight body to bracket mounting. With metal core. This pad acts as the headlight adjusting collar.Length: 6.375 inches.

$119.49/pr.
Made to Order Takes 2-3 Days
Front spring bumper

p/n: 30-0284-32

Bumpers, front spring. One (1) pair required per car.

$116.99/pr.
Made to Order Takes 2-3 Days
Motor mount service

p/n: 30-0543-11

Motor mount stabilizer bracket. Revulcanization service. Send in core and allow three weeks for service.

$109.19/ea.
Call or Email
Axle rebound pad

p/n: 30-0054-32

Pads, rear axle rebound.Length: 5.125 inches. Width: 1.4375 inches.

$107.99/pr.
In Stock
Front fender seal

p/n: 30-0189-44

Liners, front fender to runningboard. Reversible right and left like originalLength: 15.0 inches.

$102.69/pr.
Made to Order Takes 1-2 Days
Rear bumper grommet

p/n: 30-0293-29

Grommets, rear bumper.Length: 3.875 inches.

$102.69/pr.
Made to Order Takes 1-2 Days
Rear bumper grommet

p/n: 30-0006-29

Grommets, rear bumper.Length: 3.625 inches. Width: 3.3125 inches.

$102.69/pr.
In Stock
Runningboard edge seal

p/n: 30-0169-44

Liner, runningboard to body, (side apron to body seal). Set consists of two (2) pieces seven (7) foot long. One (1) inch width is after fold over.

$98.89/set
In Stock
Front bumper grommet

p/n: 30-0171-28

Grommets, front bumper. Molded right and left with correct detail as originally found. Fully molded rubber. Four inches (4") outside length by three inches (3") outside width by one and nine sixteenths inch (1-9/16") inside hole length by one half inch (1

$95.39/pr.
Made to Order Takes 1-2 Days
Rigid Run Channel

p/n: 30-0180-57

Channel, rigid run, for vent window division bar. Chrome beaded edge, mohair lined steel channel to proper dimensions for window side of wing window frame.

$87.29/pr.
In Stock
Stabilizer bushing

p/n: 30-0484-33

Bearings, stabilizer front rod. Requires two (2) per car. Fully molded rubber. Two and one fourth inch (2 1/4") length by one and thirteen sixteenths inch (1 13/16") width by nine sixteenths inch (9/16") inside hole diameter by two and one eighths inch (2

$85.29/pr.
Made to Order Takes 1-2 Days
Gearshift seal

p/n: 30-0165-24

Seal, gearshift to floorboard.Length: 5.625 inches. Width: 4.875 inches.

$84.69/ea.
Made to Order Takes 1-2 Days
Spare wheel carrier grommet

p/n: 30-0334-37

Grommet, rear spare wheel carrier bracket. Two (2) per car. (Also order our #32-0355-37 separately).

$82.29/pr.
In Stock
Steering column grommet

p/n: 30-0288-36

Grommet, steering column.Length: 5.625 inches.

$82.29/ea.
Made to Order Takes 1-2 Days
Motor mount pad

p/n: 30-0331-11

Bushing, front motor support at timing gear cover. One (1) pair required per car. Sold only in pairs.

$81.49/pr.
In Stock
Headlight mounting pad

p/n: 30-0133-14

Pads, headlight bracket mounting to fender. Molded left and right. Proper construction with beading as original. Sold in complete pairs only.Length: 9.

$80.89/pr.
In Stock
Fender welting 1/4" bead 50ft

p/n: 70-1098-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide. One fourth (1/4) inch bead, fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty five

$79.49/ea.
In Stock
Fender welting 3/16 bead 50ft

p/n: 70-1100-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide, three sixteenths (3/16) inch, fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty fi

$79.49/ea.
In Stock
Fender welting 50ft chrome

p/n: 70-1102-44

Welting, fender, bright chrome vinyl, three sixteenths (3/16) inch bead, one and one half (1-1/2) inch width. Superior quality. Fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty five (25) foot roll see #70-1101-44.

$79.49/ea.
In Stock
Side mount grommet

p/n: 30-0168-37

Grommets, sidemount to fender.

$76.49/pr.
In Stock
Taillight mounting pad

p/n: 30-0132-15

Pads, taillight bracket mounting, with proper beading.Length: 6.625 inches.

$74.99/pr.
Made to Order Takes 1-2 Days
Red brake and clutch pedal pad

p/n: 30-0188-89

Pads, brake and clutch pedal, slip over type. Black and red rubber. For black only see our #30-0188-22.Length: 3.875 inches. Width: 2.875 inches.

$74.69/pr.
In Stock
Golf Bag Door Weatherstrip

p/n: 30-0164-87

These golf bag door weatherstrips are designed from the original part for superior fitment and seal. The seals mount around the full perimeter of both golf bag doors.

$72.39/pr.
In Stock
Brake and clutch pedal pad

p/n: 30-0188-22

Pads, brake and clutch pedal, slip over type. Black rubber only. For black and red (semi-automatic clutch models) see our #30-0188-89.Length: 3.875 inches.

$67.89/pr.
In Stock
Headlight lens gasket

p/n: 30-0176-14

Gaskets, headlight lens and reflector mounting. A three sixteenths (3/16) inch cross section rubber ring of proper diameter.

$63.99/pr.
In Stock
Rumbleseat step pad

p/n: 30-0170-44

Pads, rumbleseat step.

$63.19/pr.
In Stock
Fuel neck grommet

p/n: 30-0166-41

Grommet, fuel filler neck to fender.

$61.39/ea.
In Stock
Trunk hinge mounting pad

p/n: 30-0200-87

Pads, trunk hinge. Four (4) piece set.

$59.89/set
In Stock
Firewall grommet

p/n: 30-0056-21

Grommet, firewall, for ignition cable and thermometer tube. For two and one half (2-1/2) inch hole in sheet metal.

$53.99/ea.
In Stock
Motor Mount

p/n: 30-0292-11

Motor crank case link ball insulator. One (1) pair per car. Sold only in pairs.

$53.89/pr.
In Stock
Flexible Run Channel

p/n: 70-1108-57

Channel, flexible window run, un-beaded. Cloth covered mohair-lined type. Available in 6ft lengths.

$52.99/ea.
In Stock
Flexible Run Channel

p/n: 70-1239-58

Cloth covered, mohair lined flexible metal channel for sides and top of door windows.

$52.19/ea.
In Stock
Beltline Weatherstrip

p/n: 70-0555-58

Weatherstrip, door window inner and outer, front and rear doors. Bend to fit. Available in a 3ft pair.

$51.59/pr.
In Stock
Flexible Run Channel

p/n: 70-1238-58

Cloth covered, mohair lined flexible metal channel for sides and top of door windows.

$47.89/ea.
In Stock
Fender welting 1/4" bead 25ft

p/n: 70-1097-44

Welting, fender. Superior quality, proper construction of reinforced vinyl over vinyl core, one and three eighths (1-3/8) inch wide, black only. One fourth (1/4) inch bead, twenty five (25) foot roll. Typically used to attach two (2) fenders to body. For

$46.99/ea.
In Stock
Fender welting 25ft chrome

p/n: 70-1101-44

Welting, fender, bright chrome vinyl, three sixteenths (3/16) inch bead, one and one half (1-1/2) inch width. Superior quality. Twenty five (25) foot roll. Typically used to attach two (2) fenders to body. For fifty (50) foot roll see our #70-1102-44.

$46.99/ea.
In Stock
Cowl vent gasket

p/n: 30-0172-54

Gasket, cowl vent. Top quality sponge of correct section, cut to sufficient length for circumference of vent cover.

$45.19/ea.
In Stock
Fender welting 3/16 bead 25ft

p/n: 70-1099-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide, three sixteenths (3/16) inch, twenty five (25) foot roll. Typially used for attaching two (2) fenders to body. For f

$45.19/ea.
In Stock