Search Results

111 items found matching 1938 Buick Century 4 door Plainback Sedan

Page 1 of 3 ( 111 items )

Engine Mount Service – Revulcanization Only

p/n: 50-0289-11

This Revulcanization Service Only is designed to restore your Rear Engine Support Mount to a like new original condition. Service requires your metal core. Please call or email for more service details and ordering.

$309.49/pr.

Call or Email

Window Felt and Run Channel Set

p/n: 90-0140-58

This eight (8) piece Window Felt and Run Channel set includes the inner and outer window felts, upper rigid run channels, and flexible run channels needed to complete two doors. The set can be used for front or rear doors in models with vent windows in the door.

$328.00/set

$294.89/set

10% discount

Kit

Rear Quarter Vent Window Weatherstrips

p/n: 38-0058-76

This Rear Quarter Vent Window Weatherstrip pair is a four (4) piece pair. Fits both driver (Left) and passenger (Right) rear doors of the vent / wing window assemblies.

$256.49/pr.

In Stock

Front Door Weatherstrip Kit

p/n: 90-0100-72

Front door weatherstrip. This set is the primary seal for the door to the body. Set includes the door perimeter weatherstrip and the door bottom weatherstrip. Enough for two (2) doors. Includes fasteners.

$251.99/set

In Stock

Rear Door Weatherstrips Set

p/n: 90-0101-72

This Rear Door Weatherstrips Set is designed from the original part for superior fitment and seal. These primary door weatherstrips mount (glue-on) directly to the left and right rear doors sealing the full perimeter of the doors against the vehicle body when the door is closed.

$243.49/set

In Stock

Front Door Vent Window Set

p/n: 90-0373-90

This front door vent window weatherstrip set is a four (4) piece set that contains the main vent window seals and division post seals. All of the pieces were designed from original parts for a precise, factory fit.

$255.80/set

$242.89/set

5% discount

Kit

Window Felt and Run Channel Set

p/n: 90-0142-58

This six (6) piece Window Felt and Run Channel set includes the inner and outer window felts and the flexible run channels needed to complete two (2) doors. This set is used for front or rear doors in models without vent windows in the door.

$265.80/set

$238.99/set

10% discount

Kit

Engine Mount Service – Revulcanization Only

p/n: 50-0234-11

This Revulcanization Service Only is designed to restore your Front Engine Support Mount to a like new original condition. Service requires your metal core. Please call or email for more service details and ordering.

$218.99/pr.

Call or Email

Front Door Vent Window Weatherstrips

p/n: 38-0029-55

These front door vent window weatherstrips are the main seals needed to replace the rubber on your vent windows. They are designed and molded from original parts for superior fitment and seal.

$189.89/pr.

In Stock

Windshield Gasket

p/n: 50-0250-50

This Windshield Gasket is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the front glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation.

$181.39/ea.

In Stock

Rear Window Gasket Set

p/n: 50-0287-81

This Rear Window Gasket Set mounts around the two (2) separate back windows. They have vulcanized, or bonded, ends which means no cutting or splicing is required for installation.

$178.29/pr.

In Stock

Rear bumper grommet

p/n: 50-0126-29

Grommets, rear bumper. Hollow construction for good fit. Fully molded rubber with locating tabs. Four and three eighths inch (4-3/8") outside length by two and three fourths inch (2-3/4") outside width by one and three fourths inch (1-3/4") inside hole le

$133.39/pr.

In Stock

Trunk Weatherstrip

p/n: 70-0083-85

This Trunk Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.

$131.99/ea.

In Stock

Rear spring bumper

p/n: 50-0177-35

Bumper, rear spring, right and left.

$120.59/pr.

In Stock

Transmission mounting pad

p/n: 50-0335-25

Transmission support pad, insulator blocks, upper and lower.

$116.79/pr.

Made to Order Takes 5-7 Days

Fender welting 1/4" bead 50ft

p/n: 70-1098-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide. One fourth (1/4) inch bead, fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty five

$101.89/ea.

In Stock

Fender welting 50ft chrome

p/n: 70-1102-44

Welting, fender, bright chrome vinyl, three sixteenths (3/16) inch bead, one and one half (1-1/2) inch width. Superior quality. Fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty five (25) foot roll see #70-1101-44.

$101.89/ea.

In Stock

Fender Welting with 3/16 Bead - 50 Ft. Roll

p/n: 70-1100-44

A superior quality Fender Welting material constructed of reinforced black vinyl over a vinyl core. Typically used for attaching four (4) fenders to body. Sold in a 50 foot roll.

$101.89/ea.

In Stock

Fender Skirt Edge Weatherstrips

p/n: 70-0055-45

This Fender Skirt Edge Weatherstrip pair is designed from the original part for superior fitment, finish and sealing function. Two five (5) foot strips that fit between the rear wheel fender skirt and rear quarter panel.

$95.89/pr.

In Stock

Brown steering floorplate

p/n: 50-0260-89

Retainer, front floor mat on steering column (also called steering column floorplate). Brown rubber. For black see our #50-0260-36.

$87.49/ea.

In Stock

Windshield Division Bar Gasket

p/n: 70-0159-51

Gasket, windshield division post, inner and outer, also acts as retainer for outer division bar chrome, molding.

$86.19/set

In Stock

Front suspension bumper

p/n: 50-0125-32

Bumper, front suspension, lower arm.Width: 2.625 inches. Height: 2.5625 inches.

$85.59/pr.

In Stock

Front bumper grommet

p/n: 50-0041-28

Grommets, front bumper, right and left. Fully molded rubber. Four and three fourths inch (4-3/4") outside length by three inches (3") outside width by one and five eighths inch (1-5/8") inside hole length by one half inch (1/2") inside hole width by one a

$81.89/pr.

In Stock

Stabilizer Bar End Link Set

p/n: 70-0567-34

Twenty-two (22) piece Stabilizer Bar End Link set for both sides of one (1) vehicle, fits front or rear bar. Order two (2) sets for vehicles with front and rear stabilizer bars. Hex head bolt. 5/16"-24NF x 7-5/8" long. Includes metal sleeves, cup washers and rubber grommets.

$79.39/set

In Stock

Temporarily Unavailable

Front Spring Rubber Bumper

p/n: 70-0329-32

Front Spring Rubber Bumper Pair - for upper control arm on frame.

$77.59/pr.

In Stock

Stabilizer bushing

p/n: 50-0520-34

Bushing, stabilizer bracket. Constructed of durable BUNA rubber. One and five eighths inch (1 5/8") length by one and one half inch (1 1/2") outside diameter by three fourths inch (3/4") inside hole diameter.

$74.19/pr.

In Stock

Rear coil spring pad

p/n: 50-0359-35

Insulators, rear coil spring. Fabric reinforced rubber as original. One (1) pair per car.

$72.19/pr.

In Stock

Taillight Mounting Pad

p/n: 50-0101-15

Right and left taillight mount pad. Replaces #1304392-3, excellent job, fully detailed.

$71.39/pr.

In Stock

Accelerator pedal pad

p/n: 50-0038-40

Pad, accelerator pedal. Rubber flanges all around as original to fit over pedal core.Length: 9.125 inches.

$70.39/ea.

In Stock

Rigid Run Channel

p/n: 70-0347-58

This Rigid Run Channel is stainless beaded and mohair-lined to help eliminate window rattle, provides a smooth sliding surface for glass movement and works to protect the glass.

$69.69/pr.

In Stock

Steering column floorplate

p/n: 50-0260-36

Retainer, front floor mat on steering column (also called steering column floorplate). Black rubber. For brown see our #50-0260-89.Width: 4.3125 inches.

$68.99/ea.

Made to Order Takes 5-7 Days

Flexible Run Channel

p/n: 70-1239-58

Cloth covered, mohair lined flexible metal channel for sides and top of door windows.

$66.89/ea.

In Stock

Automatic choke cable cover

p/n: 50-0243-41

Cover, automatic choke cable at carburetor.

$65.99/ea.

Made to Order Takes 5-7 Days

Window Felt Beltline Weatherstrips

p/n: 70-0555-58

These Window Felt Beltline Weatherstrips are sold as a three (3) foot pair. The beltline is used for side windows inner and/or outer, front and/or rear doors. Available in a 3ft pair.

$65.99/pr.

In Stock

Vent division bar weatherstrip

p/n: 70-0791-56

Front vent window division post seal. Fully molded with metal core and attaching tabs.

$65.89/pr.

In Stock

Parking light mounting pad

p/n: 50-0064-16

Pad, parking light (fender light).Width: 8.75 inches.

$65.39/pr.

Made to Order Takes 5-7 Days

Front Coil Spring Pad

p/n: 50-0476-35

Pad, front coil spring insulator, upper. Two (2) per car, five and one eighths (5-1/8) inch outside diameter. Height: .28125 inches.

$63.79/pr.

In Stock

Brown brake and clutch pad

p/n: 50-0054-89

Pad, brake and clutch pedal. Brown rubber. For black see our part #50-0054-22. Perfect copy, fine detail.Color:brown Width: 3.125 inches.

$63.29/pr.

Made to Order Takes 5-7 Days

Flexible Run Channel

p/n: 70-1238-58

Cloth covered, mohair lined flexible metal channel for sides and top of door windows.

$63.19/ea.

In Stock

Fender welting 1/4" bead 25ft

p/n: 70-1097-44

Welting, fender. Superior quality, proper construction of reinforced vinyl over vinyl core, one and three eighths (1-3/8) inch wide, black only. One fourth (1/4) inch bead, twenty five (25) foot roll. Typically used to attach two (2) fenders to body. For

$62.19/ea.

In Stock

Fender welting 25ft chrome

p/n: 70-1101-44

Welting, fender, bright chrome vinyl, three sixteenths (3/16) inch bead, one and one half (1-1/2) inch width. Superior quality. Twenty five (25) foot roll. Typically used to attach two (2) fenders to body. For fifty (50) foot roll see our #70-1102-44.

$62.19/ea.

In Stock

Sliding Quarter Window Weatherstrip

p/n: 70-0353-78

This Sliding Quarter Window Weatherstrip is used for side window inner and/or outer, front and/or rear doors. Available in a 6ft lengths.

$62.19/ea.

In Stock

Fender Welting with 3/16 Bead - 25 Ft. Roll

p/n: 70-1099-44

A superior quality Fender Welting material constructed of reinforced black vinyl over a vinyl core. Typically used for attaching two (2) fenders to body. Sold in a 25 foot roll.

$59.59/ea.

In Stock

Rumbleseat step mounting pad

p/n: 50-0182-44

Mounting pad, rumbleseat step to fender, proper beaded edge, exact copy.Width: 4.8125 inches.

$56.19/ea.

Made to Order Takes 5-7 Days

Side Window Sash Channel

p/n: 70-0641-58

Sash channel, side window glass. U-shaped steel channel only, no filler. Will require that you attach your own window regulator cam to underside as required.

$55.99/ea.

In Stock