Search Results

103 items found matching 1938 Buick Roadmaster 4 door Trunkback Sedan
The listing below contains just short, abbreviated descriptions.
Please click on the part name in red in order to get a complete description.
Motor mount service

p/n: 50-0256-11

Motor mount, rear. Revulcanization service only.

$261.20/pr.
Call or Email
Side window run channel kit

p/n: 90-0140-58

This eight (8) piece kit includes the inner and outer windowfelts, upper rigid run channels, and flexible run channels needed to complete two (2) doors. Used for front or rear doors in models with vent windows in the door. Models with wood in the doors use our #70-1168-58 as lower rigid run channel.

$236.10/set
$212.50/set
10% discount
Kit
Front Door Vent Window Kit

p/n: 90-0365-90

This front door vent window weatherstrip kit is a four (4) piece set that contains the main vent window seals and division post seals. All of the pieces were designed from original parts for a precise, factory fit.

$196.20/set
$186.40/set
5% discount
Kit
Front Door Vent Window Weatherstrips

p/n: 38-0015-55

These front door vent window weatherstrips are the main seals needed to replace the rubber on your vent windows. They are designed and molded from original parts for superior fitment and seal.

$181.30/pr.
In Stock
Front spring bumper service

p/n: 50-0383-32

Front Spring Bumper. Revulcanization service only.

$178.50/pr.
Call or Email
Side window run channel kit

p/n: 90-0142-58

This six (6) piece kit includes the inner and outer windowfelts and flexible run channels needed to complete two (2) doors. Used for front or rear doors in models without vent windows in the door.

$191.80/set
$172.60/set
10% discount
Kit
Motor mount service

p/n: 50-0234-11

Motor mount, front, upper or lower, as required. Revulcanization service only.

$171.20/pr.
Call or Email
Rear Window Gasket Set

p/n: 30-0368-81

This rear window gasket set mounts around the two (2) separate back windows. They have vulcanized, or bonded, ends which means no cutting or splicing is required for installation.

$168.40/pr.
In Stock
Rear bumper grommet

p/n: 50-0055-29

Grommets, rear bumper. Fully molded rubber. Four and three sixteenths inch (4-3/16") outside length by two and thirteen sixteenths inch (2-13/16") outside width by two inches (2") inside hole length by one half inch (1/2") inside hole width by two and one

$114.70/pr.
Made to Order Takes 1-2 Days
Windshield Gasket

p/n: 70-0535-50

This windshield gasket is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the front glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation.

$114.00/ea.
In Stock
Front coil spring pad

p/n: 50-0306-35

Insulator ring, front coil spring, top and bottom. Four (4) per car.

$113.70/set
Made to Order Takes 1-2 Days
Door weatherstrip

p/n: 70-0085-73

Weatherstrip, door opening, fits retainer under edge of body sill to form seal when door is closed. Six (6) foot strips.Length: 72.0 inches. Width: 1.

$104.40/pr.
In Stock
Trunk Weatherstrip

p/n: 70-0083-85

This trunk weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.

$103.20/ea.
In Stock
Front suspension rebound pad

p/n: 50-0083-32

Rebound pad, front suspension, upper arm, on frame. Rubber body, steel core with five sixteenths (5/16) inch stud.

$99.40/pr.
In Stock
Rear spring bumper

p/n: 50-0177-35

Bumper, rear spring, right and left.

$92.20/pr.
In Stock
Transmission mounting pad

p/n: 50-0335-25

Transmission support pad, insulator blocks, upper and lower.

$87.80/pr.
In Stock
Front spring bumper

p/n: 70-0215-32

Bumpers, front spring, lower arm.

$86.50/pr.
Made to Order Takes 1-2 Days
Front bumper grommet

p/n: 50-0056-28

Grommets, front bumper. Fully molded rubber. Four and seven eighths inch (4-7/8") outside length by two and seven eighths inch (2-7/8") outside width by one and fifteen sixteenths (1-15/16") inside hole length by nine sixteenths inch (9/16") inside hole w

$79.60/pr.
In Stock
Fender welting 1/4" bead 50ft

p/n: 70-1098-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide. One fourth (1/4) inch bead, fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty five

$76.30/ea.
In Stock
Fender welting 3/16 bead 50ft

p/n: 70-1100-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide, three sixteenths (3/16) inch, fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty fi

$76.30/ea.
In Stock
Fender welting 50ft chrome

p/n: 70-1102-44

Welting, fender, bright chrome vinyl, three sixteenths (3/16) inch bead, one and one half (1-1/2) inch width. Superior quality. Fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty five (25) foot roll see #70-1101-44.

$76.30/ea.
In Stock
Fenderskirt edge seal

p/n: 70-0055-45

Seal, fenderskirt edge. Each five (5) foot long. Similar to our #20-0111-44, but thicker.Length: 60.0 inches. Width: .25 inches.

$71.90/pr.
In Stock
Taillight Mounting Pad

p/n: 50-0057-15

Taillight mounting pad. Replaces #1304394-5.

$70.20/pr.
Made to Order Takes 1-2 Days
Windshield division bar gasket

p/n: 70-0247-51

Gasket set, windshield divider post, inner and outer. Two (2) piece set with screw holes and pilots.

$69.00/set
In Stock
Brown brake and clutch pad

p/n: 50-0049-89

Pad, brake and clutch pedal. Brown rubber. For black see our #50-0049-22. Full slip-over type as original.Color:brown Width: 3.0 inches.

$67.00/pr.
In Stock
Brake and clutch pedal pad

p/n: 50-0049-22

Pad, brake and clutch pedal. Black rubber. For brown see our #50-0049-89. Full slip-over type as original.Width: 3.0 inches. Height: 2.75 inches.

$65.70/pr.
In Stock
Windshield division bar gasket

p/n: 70-0159-51

Gasket, windshield division post, inner and outer, also acts as retainer for outer division bar chrome, molding.

$64.50/set
In Stock
Rear coil spring pad

p/n: 50-0359-35

Insulators, rear coil spring. Fabric reinforced rubber as original. One (1) pair per car.

$54.10/pr.
In Stock
Accelerator pedal pad

p/n: 50-0038-40

Pad, accelerator pedal. Rubber flanges all around as original to fit over pedal core.Length: 9.125 inches.

$52.70/ea.
In Stock
Rigid Run Channel

p/n: 70-0347-58

Channel, rigid run, window division bar. Stainless beaded edge, mohair-lined, exact replacement for rear side of division bar.

$52.10/pr.
In Stock
Flexible Run Channel 6 Foot

p/n: 70-1239-58

Window run channel with stainless beaded edge. Six (6) foot length. Cloth covered, mohair lined, flexible channel for sides and top of door windows. Exact replacement for listed vehicles but can be used in many applications.

$48.20/ea.
In Stock
Beltline weatherstrip

p/n: 70-0555-58

Weatherstrip, door window inner and outer, front and rear doors. Seven sixteenths (7/16) inch wide, with chrome bead, mohair faced, flexible. Two (2) three (3) foot strips. Bend to fit.

$47.70/pr.
In Stock
Automatic choke cable cover

p/n: 50-0243-41

Cover, automatic choke cable at carburetor.

$46.20/ea.
In Stock
Parking light mounting pad

p/n: 50-0064-16

Pad, parking light (fender light).Width: 8.75 inches.

$45.70/pr.
In Stock
Front Coil Spring Pad

p/n: 50-0476-35

Pad, front coil spring insulator, upper. Two (2) per car, five and one eighths (5-1/8) inch outside diameter. Height: .28125 inches.

$44.70/pr.
In Stock
Flexible Run Channel 5 Foot

p/n: 70-1238-58

Window run channel, stainless beaded edge. Cloth covered, mohair lined flexible metal channel for sides and top of door windows. Perfect dimensions, Five eighths (5/8) inch wide by nine sixteenths (9/16) inch overall height, exact replacement. Five (5) fo

$44.30/ea.
In Stock
Sliding Quarter Window Weatherstrip

p/n: 70-0353-78

Weatherstrip, inner and outer for sliding quarter window, chrome beaded, mohair faced, flexible stock. May be formed to required outline. Six (6) foot strip.

$43.50/ea.
In Stock
Fender welting 1/4" bead 25ft

p/n: 70-1097-44

Welting, fender. Superior quality, proper construction of reinforced vinyl over vinyl core, one and three eighths (1-3/8) inch wide, black only. One fourth (1/4) inch bead, twenty five (25) foot roll. Typically used to attach two (2) fenders to body. For

$43.40/ea.
In Stock
Fender welting 25ft chrome

p/n: 70-1101-44

Welting, fender, bright chrome vinyl, three sixteenths (3/16) inch bead, one and one half (1-1/2) inch width. Superior quality. Twenty five (25) foot roll. Typically used to attach two (2) fenders to body. For fifty (50) foot roll see our #70-1102-44.

$43.40/ea.
In Stock
Fender welting 3/16 bead 25ft

p/n: 70-1099-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide, three sixteenths (3/16) inch, twenty five (25) foot roll. Typially used for attaching two (2) fenders to body. For f

$41.80/ea.
In Stock
Rumbleseat step mounting pad

p/n: 50-0182-44

Mounting pad, rumbleseat step to fender, proper beaded edge, exact copy.Width: 4.8125 inches.

$39.30/ea.
Made to Order Takes 1-2 Days
Steel sash channel

p/n: 70-0641-58

Sash channel, side window glass. U-shaped steel channel only, no filler. Will require that you attach your own window regulator cam to underside as required.

$39.10/ea.
In Stock
Cowl vent weatherstrip

p/n: 70-0143-54

Gasket, cowl vent. Perfect copy of original, not a sponge substitute, top quality material.

$38.30/ea.
In Stock
Radio antenna end loop

p/n: 70-0105-21

End loop, radio antenna. Cord reinforced rubber with metal grommet. Mounted on runningboard on some models.

$38.20/ea.
In Stock
Antenna boot

p/n: 70-0212-21

Boot, runningboard antenna wire connection.

$34.70/ea.
In Stock
License light mounting pad

p/n: 50-0034-17

Pad, rear license light and trunk handle body.Length: 7.50 inches.

$33.00/ea.
In Stock
Brake and clutch shank seal

p/n: 50-0066-24

Grommet, brake and clutch pedal floor seal.Width: 1.8125 inches. Height: 2.375 inches.

$32.50/pr.
In Stock
Starter solenoid boot

p/n: 70-0371-21

Boot, starter solenoid.

$26.60/ea.
In Stock
Firewall grommet

p/n: 50-0166-20

Grommet, wire harness-thru-firewall mat. Two (2) inch diameter with two and one fourth (2-1/4) inch outside diameter flange.

$24.60/ea.
In Stock
Battery cable boot

p/n: 70-0704-21

Boot, battery cable at starter solenoid.Width: 2.75 inches.

$23.50/ea.
In Stock
Glovebox door check grommet

p/n: 70-0285-88

Grommet, glovebox door check link, for one and one eighth (1-1/8) inches slot in dash.Length: 1.4375 inches. Width: .625 inches.

$20.60/ea.
In Stock
Battery clamp cover

p/n: 70-0095-21

Cover, battery clamp. Control unsightly sulfate buildup. Help protect the nearby metal and finish. Good copy from original part.Length: 3.5 inches.

$18.80/ea.
In Stock
Door Handle Ferrule

p/n: 60-0389-69

Ferrule, outside door handle. Chrome with rubber sleeve. Two (2) piece set includes one (1) chrome piece and one (1) rubber piece. Enough for one door.

$17.80/set
In Stock
Vent Window Division Bar Weatherstrip

p/n: 70-0040-56

Vent window division post seal. Extruded thirty (30") inch rubber strip that may have to be glued to your old original division post seal core, or directly to the division post.

$14.90/ea.
In Stock
Rear coil spring pad

p/n: 50-0304-35

Insulator, rear coil spring clamp bolt (upper end). Two (2) per car. Fabric reinforced rubber as original.

$14.60/ea.
In Stock
Wiper transmission gasket

p/n: 70-1196-53

Mounting gasket, windshield wiper transmission.Width: 2.5 inches.

$14.40/pr.
In Stock
Axle rebound pad

p/n: 50-0303-35

Bushing, rear axle, anti-sway rod ends. Fully molded rubber. Four (4) required per car. One and three eighths inch (1 3/8") top outside diameter by one and one fourth inch (1 1/4") bottom outside diameter by three fourths inch (3/4") inside hole diameter

$14.00/ea.
Made to Order Takes 1-2 Days
Firewall grommet

p/n: 50-0299-20

Grommet, two (2) holes for oil pressure and water temperature lines through firewall.

$13.90/ea.
In Stock
Wiper transmission gasket

p/n: 70-0286-53

Gasket, windshield wiper transmission mounting.

$13.40/pr.
In Stock
Front bumper gravel shield

p/n: 70-0127-30

Gravel shield, front bumper, anti-rattle.

$13.10/ea.
In Stock
Door check link rod end stop

p/n: 70-0326-70

End stop and pad, door check link rod. Rubber with embedded steel plate, five sixteenths (5/16) inch diameter thread. Most models with rod type door checks.

$13.00/ea.
In Stock
Dimmer switch grommet

p/n: 40-0083-88

Grommet, dimmer switch for carpet application.

$11.00/ea.
In Stock
Masticated rubber sheet

p/n: 70-0645-45

Masticated sheet. Three thirty seconds (3/32) inch thick rubber sheet containing random milled cotton cord reinforcement for front end splash aprons, etc. This product is a four (4) foot wide roll, and will only be sold in four (4) square foot multiples

$10.80/sqf
In Stock
Side window run channel

p/n: 70-1168-58

Channel, side window, pre-flocked, five sixteenths (5/16) inch wide base for one fourth (1/4) inch glass. Most Fisher closed bodies except those using stainless beaded channel. For nine sixteenths (9/16) inch wide channel, see our #70-1169-58.

$9.80/ft.
In Stock
Fabric hood lacing

p/n: 70-2221-42

Lacing, hood, fabric, webbing anti-squeak. DOES NOT have hollow center. Fasten with rivets if so found originally. Excellent quality.

$8.10/ft.
In Stock
Fabric hood lacing

p/n: 60-0578-42

Lacing, hood, fabric, webbing anti-squeak. With hollow center to receive wire if needed, or fasten with rivets if so found originally. Excellent quality. Seven eighths (7/8) inch by one eighths (1/8) inch thick.

$8.10/ft.
In Stock
Door bumper

p/n: 34-0025-42

Bumper, front and rear body hinge pillar, one (1) inch diameter by one fourth (1/4) inch thick, held by screw, steel core. Auxiliary, used only where needed to prevent door rattle.Note: also used on 1942-50 Packards with Clipper styling near t

$7.90/ea.
In Stock
Door Handle Grommet

p/n: 70-0177-69

Grommet for outside door handle bezel.

$7.90/ea.
In Stock
Mounting pad

p/n: 50-0229-11

Mounting pad. Two and one fourth (2-1/4) inches outside diameter by five eighths (5/8) inch inside diameter by one half (1/2) inch thick.

$7.90/ea.
In Stock
Tie rod dust cover

p/n: 70-0537-32

Dust cover, tie rod ends.

$7.80/ea.
In Stock
Door check link rod end stop

p/n: 70-0384-70

Rubber washer, door check link stop.

$7.70/ea.
In Stock
Door bumper

p/n: 34-0131-37

Bumper, front door above the upper hinge on the upper radius of the door. Stiff-backed, retained by screw, mounted on door only.

$7.40/ea.
In Stock
Side window roller

p/n: 70-0117-62

Anti-rattle roller, side windows. Rubber only, replaces original perfectly and easily. Fits both styles of brackets.

$7.30/ea.
In Stock
Spark plug grommet

p/n: 70-1181-21

Grommet, spark plug and coil wire at distributor cap outlets. For seven (7mm) millimeter, later years.

$7.20/ea.
In Stock
Brown door lock knob

p/n: 70-0660-70

Knob or push button for inside door lock, fits over 1/8" steel rod to door lock. Hard brown rubber, may be lacquered other colors as required.

$7.00/ea.
In Stock
Spark plug grommet

p/n: 70-1180-21

Grommet, spark plug & coil wire at distributor cap outlets. For nine (9mm) millimeter wire, earlier years.

$6.80/ea.
In Stock
Brown door lock knob

p/n: 70-0354-70

Knob for inside door lock control rod. Neutral brown color rubber, 3/32 inch hole. See also our #70-0660-70.

$6.30/ea.
In Stock
Door check link rod end stop

p/n: 70-0325-70

Pad, door check link. For rod type door check. One (1) inch diameter by three eighths (3/8) inch thick with five sixteenths (5/16) inch hole.

$6.10/ea.
In Stock
Sun visor end plug

p/n: 70-0330-89

End plug, swing-type sun visor tube. Brown only.

$6.10/ea.
In Stock
Brake cable anti-rub cover

p/n: 70-1701-24

Anti-rub cover, brake cable. Fits all models with seven sixteenths (7/16) inch outside diameter cable.Width: 2.0 inches.

$5.90/ea.
In Stock
Door Weatherstrip (Sponge Rubber Extrusion - General Use)

p/n: 70-0411-73

Door edge weatherstrip made from high quality EPDM sponge rubber. Excellent for use on many different vehicle models.

$5.90/ft.
In Stock
Pressure ring

p/n: 70-0261-69

Pressure ring (washer), sponge rubber, interior door handle and window regulator escutcheon. One and three fourths (1-3/4) inches outside diameter by three eighths (3/8) inch thick.

$5.90/ea.
In Stock
Channel filler weatherstrip

p/n: 70-0075-57

Channel pad, window carrier, incorporating weatherstrip. Used for some side window lower channel.Width: .375 inches. Height: .6875 inches.

$5.80/ft.
In Stock
Universal mounting pad

p/n: 70-0308-17

Mounting pad, continuous for lights, hinges, brackets, and other bright work when no molded pad is available.

$5.80/ft.
Made to Order Takes 2-3 Days
Body hole plug

p/n: 35-0863-45

Plug, body sheet metal holes. Used in various places (like trunks). For one and one half (1-1/2) inch hole in body.

$5.70/ea.
In Stock
Side window bumper

p/n: 60-0195-62

Anti-rattle, side window, inner and outer. Fits slot in outer door body metal and inner window frame (garnish molding).Width: .75 inches. Height: .

$5.50/ea.
In Stock
Windshield Weatherstrip

p/n: 70-1190-52

Channel, windshield, for windows without chrome reveal molding. (With 2 piece windshield, select gasket for division bar).

$5.50/ft.
In Stock
Channel filler weatherstrip

p/n: 70-0241-57

Weatherstrip, side window, double-lip seal type, used as filler for one fourth (1/4) inch glass in metal carrier channel.Width: .375 inches. Height: .

$5.40/ft.
In Stock
Window weatherstrip

p/n: 70-1191-52

Gasket, window, for models without chrome reveal molding.

$5.40/ft.
In Stock
Window weatherstrip

p/n: 70-1192-52

Gasket, window, for models with chrome reveal molding.

$5.40/ft.
In Stock
Sash channel filler 1/16 cork

p/n: 70-1115-57

Filler strip, window glass sash channel. One sixteenths (1/16) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherstrip type of filler. This is the highest quality linen back, rubber cork composition on

$4.69/ft.
In Stock
Sash Channel Filler 1/16 Rubber

p/n: 70-2170-57

Filler strip, window glass sash channel. One sixteenths (1/16) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherlip type of filler. This is the highest quality rubber like polymer designed for settin

$4.29/ft.
In Stock
Shock absorber bushing

p/n: 70-0541-33

Bushing, shock absorber mounting. Five eighths (5/8) inch hole, one and one fourth (1-1/4) inch outside diameter, five eighths (5/8) inch thick.

$4.10/ea.
In Stock
Sash channel filler 1/32 cork

p/n: 70-1114-57

Filler strip, window glass sash channel. One thirty seconds (1/32) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherlip type of filler. This is the highest quality linen back, rubber cork composition

$3.99/ft.
In Stock
Sash Channel Filler 1/32 Rubber

p/n: 70-2169-57

Filler strip, window glass sash channel. One thirty seconds (1/32) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherlip type of filler.

$3.99/ft.
In Stock
Side mount tire cover seal

p/n: 50-0541-37

Seal or strip, side mount tire cover.Width: .28125 inches. Height: .15625 inches.

$3.40/ft.
In Stock
Wiring grommet

p/n: 32-0047-14

Grommet, electric wire through body for head and taillights. Sheet Metal Hole: 11/16" Center Hole: 3/8" Outside Diameter: 1" Slot Width: 1/16"

$3.40/ea.
In Stock
Hood bumper

p/n: 70-0294-42

Bumper, hood rest, cap type for adjustable screw, fifteenth sixteenths (15/16) inch, seven sixteenths (7/16) inch thick.

$3.00/ea.
In Stock
Door weatherstrip fastener

p/n: 70-0303-73

Metal clip for attaching door edge weatherstrip, our #70-0411-73. For one fourth (1/4) inch holes. Doors usually require one (1) clip per every six (6) inches. Estimate needs accordingly.

$2.60/ea.
In Stock
Door weatherstrip fastener

p/n: 70-0391-73

Clip, door bottom weatherstrip retaining, for our #70-0066-73 lower door weatherstrip, to fit one fourth (1/4) inch holes. Doors usually require one clip per every six (6) inches. Estimate needs accordingly.

$2.50/ea.
In Stock