Search Results

788 items found matching 1940
The listing below contains just short, abbreviated descriptions.
Please click on the part name in red in order to get a complete description.
Fender washer

p/n: 20-2190-44

Washer, front fender. Small type. One and one fourth (1-1/4) inch diameter.

$0.69/ea.
In Stock
Fender washer

p/n: 20-2191-44

Washer, rear fender. Large type. One and one half (1-1/2) inch diameter.

$0.69/ea.
In Stock
Firewall grommet

p/n: 32-0158-17

Grommet, hand brake cable through firewall. Sheet Metal Hole: 9/16" Center Hole: 5/16" Outside Diameter: 13/16" Slot Width: 1/16"

$0.89/ea.
In Stock
Standard Bumper

p/n: 33-0128-88

Standard Bumper - Commonly used for fuel filler or glovebox doors.

$1.19/ea.
In Stock
Glovebox and Fuel Filler Door Bumper

p/n: 33-0127-41

Glovebox and Fuel Filler Door Bumper

$1.49/ea.
In Stock
Standard bumper

p/n: 33-0730-42

Bumper, hood ornament base. One (1) per car. Self retain.Cadillac 1939-48 Bumper, rubber, hood ornament base. 1 per car.

$1.49/ea.
In Stock
Wiring grommet

p/n: 32-0401-45

Grommet, license light wire through trunk inner panel. Sheet Metal Hole: 1" Center Hole: 3/8" Outside Diameter: 1-1/4" Slot Width: 1/16"

$2.19/ea.
In Stock
Door check link rod end stop

p/n: 20-1639-70

Bumper, door check arm.

$2.19/ea.
In Stock
Chrome molding washer

p/n: 60-0727-45

Washer, for attaching chrome moldings on body. Fits into metal cup retainer. Three fourths (3/4) inch diameter, use as required.

$2.39/ea.
In Stock
Glovebox bumper

p/n: 20-2391-88

Bumpers, glovebox door.Ford Cars 1960 Bumpers, fuel tank door. All Galaxie models. Ford Truck 1935-47 Bumpers, glovebox door.

$2.59/pr.
In Stock
Firewall grommet

p/n: 20-1561-20

Grommet, choke and throttle rod or hood pull cable firewall.1932-47: All Trucks for choke & throttle rod; 1957-63: All Trucks for choke & wiper.

$2.69/ea.
In Stock
Wiper control grommet

p/n: 20-2302-20

Grommet, wiper control rod.

$2.69/ea.
Ships in 3-4 Days
Hood Bumper

p/n: 33-0003-42

Bumper, hood, 2 uses. Hood to radiator shell at side panel, Hood to fender, as required. Up to ten (10) required per car.Buick requires six (6) per car.

$2.69/ea.
In Stock
Rear view mirror mounting pad

p/n: 20-2332-45

Pad, cowl mirror.

$2.69/ea.
Ships in 3-4 Days
Throttle rod ball

p/n: 20-0350-41

Ball, carburetor choke and throttle rod connector.

$2.69/ea.
Ships in 3-4 Days
Trunk handle mounting pad

p/n: 20-2384-86

Seal, deck lid handle shaft to base.

$2.69/ea.
Ships in 3-4 Days
License lens gasket

p/n: 20-1993-17

Gasket, license plate light lens.

$2.69/ea.
Ships in 3-4 Days
Standard bumper

p/n: 33-0136-42

Bumper, standard. See detail page for specific usage.

$2.79/ea.
In Stock
Hood Bumper

p/n: 33-0449-42

Bumper, hood side panel.

$2.79/ea.
In Stock
Window channel retaining clip

p/n: 70-0515-62

Clip, side window run channel retaining. Rust resistant spring steel.Width: .4375 inches. Height: .8125 inches.

$2.89/ea.
In Stock
Shock Absorber Arm Bushing

p/n: 60-0216-33

Bushing, for double acting shock absorber arm link. Height: .78125 inches.

$2.89/ea.
In Stock
Wiring grommet

p/n: 32-0369-20

Grommet, wiring harness through fender skirts, or hood latch lower mounting panels. Also other miscellaneous uses. Sheet Metal Hole: 1-1/16" Center Hole: 3/4" Outside Diameter: 1-3/8" Slot Width: 1/16"

$2.89/ea.
In Stock
Trunk or hood bumper

p/n: 34-0203-42

Bumper, trunk or hood. Molded with clearance for screw. Used for: Buick 1942-50 Bumper for trunk. Chevrolet 1949-55 Bumper for rear hood corners on cowl. Chevrolet 1949-50 Bumper for trunk. Oldsmobile 1938 Bumper under hood corner on radi

$2.89/ea.
In Stock
Hood bumper

p/n: 33-0046-42

Bumper, hood front in grille.

$2.89/ea.
In Stock
Window channel retaining clip

p/n: 70-0514-62

Clip, side window run channel retaining. Rust resistant spring steel. Compare with your original.Width: .4375 inches. Height: .9375 inches.

$2.89/ea.
In Stock
Hood bumper

p/n: 33-0031-42

Bumper, hood, self-retaining, along edge of hood against fender. One half (1/2) inch outside diameter, for five sixteenths (5/16) inch hole in sheet metal.

$2.99/ea.
In Stock
Door Weatherstrip (Sponge Rubber Extrusion - General Use)

p/n: 30-0243-73

Door edge weatherstrip made from high quality EPDM sponge rubber. Excellent for use on many different vehicle models.

$3.29/ft.
In Stock
Hood bumper

p/n: 70-0294-42

Bumper, hood rest, cap type for adjustable screw, fifteenth sixteenths (15/16) inch, seven sixteenths (7/16) inch thick.

$3.29/ea.
In Stock
Glovebox bumper

p/n: 40-0501-88

Bumper, glovebox door.Note: not used on Airflow models.

$3.29/ea.
In Stock
Gearshift grommet

p/n: 32-0050-24

Grommet, insulator, gearshift control rod. Sheet Metal Hole: 11/16" Center Hole: 15/32" Outside Diameter: 3/4" Slot Width: 1/4"

$3.39/ea.
In Stock
Firewall grommet

p/n: 32-0066-20

Grommet, headlight wire through fender. Sheet Metal Hole: 3/4" Center Hole: 1/4" Outside Diameter: 15/16" Slot Width: 1/16"

$3.39/ea.
In Stock
License lens gasket

p/n: 20-2156-17

Seal, trunk handle license plate light lens.

$3.59/ea.
Ships in 3-4 Days
Gearshift bushing

p/n: 32-0051-24

Insulator (bushing). Gearshift selector rod. Sheet Metal Hole: 9/16" Center Hole: 3/8" Outside Diameter: 5/8" Slot Width: 5/32"

$3.69/ea.
In Stock
Firewall Grommet

p/n: 32-0064-21

Grommet, vacuum line through firewall. Fits thirteen sixteenths (13/16) inch hole in sheet metal.

$3.79/ea.
In Stock
Side window weatherstrip

p/n: 70-0064-57

Seal, lower side window. Fastens to inner face of door to seal against outer side of glass. Also used as weatherstrip on crank-up windshield tops.

$3.79/ft.
In Stock
Wiring grommet

p/n: 32-0047-14

Grommet, electric wire through body for head and taillights. Sheet Metal Hole: 11/16" Center Hole: 3/8" Outside Diameter: 1" Slot Width: 1/16"

$3.79/ea.
In Stock
Side window weatherstrip

p/n: 70-0079-58

Weatherstrip, side window lower edge, retained in metal flap on side of carrier channel, seals out water when window is cranked up.Width: .375 inches.

$3.79/ft.
In Stock
Front bow fastening clip

p/n: 70-0527-67

Clip, weatherstrip fastening. Front bow to windshield, for holding #70-0138-64 and #70-0157-64 in place. Approximately thirty (30) per car. Cadmium plated, fits rectangular clearance, for one fourth (1/4) inch hole.

$3.89/ea.
In Stock
Radiator mounting pad

p/n: 20-1600-31

Pads, radiator to frame.

$3.89/pr.
In Stock
Side window lift limit cap

p/n: 60-0071-62

Caps, side window lift limit. Rubber, snap-over type, three fourths (3/4) inch diameter by five sixteenths (5/16) inch thick.

$3.89/ea.
In Stock
Shock absorber bushing

p/n: 70-0547-32

Bushing, shock absorber mounting. Double cone style, rear. Five eighths (5/8) inch hole, one and one sixteenths (1-3/16) inch outside diameter, three fourth (3/4) inch thick.

$3.89/ea.
In Stock
Firewall grommet

p/n: 32-0263-17

Grommet, license light wire through body. Sheet Metal Hole: 3/4" Center Hole: 5/16" Outside Diameter: 1" Slot Width: 1/16"

$4.29/ea.
In Stock
Firewall grommet

p/n: 32-0162-21

Grommet, utility. Sheet Metal Hole: 3/4" Center Hole: 1/4" Outside Diameter: 15/16" Slot Width: 1/16"

$4.29/ea.
In Stock
Sash channel filler 1/32 cork

p/n: 70-1114-57

Filler strip, window glass sash channel. One thirty seconds (1/32) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherlip type of filler. This is the highest quality linen back, rubber cork composition

$4.39/ft.
In Stock
Sash Channel Filler 1/32 Rubber

p/n: 70-2169-57

Filler strip, window glass sash channel. One thirty seconds (1/32) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherlip type of filler.

$4.39/ft.
In Stock
Filler and cushion strip

p/n: 70-1236-48

Filler and cushion strip, many applications. One sixteenth (1/16) inch by one and three eighths (1-3/8) inch.

$4.39/ft.
In Stock
Runningboard mounting pad

p/n: 30-0405-48

Insulator, washer, runningboard to frame bracket bolt, lower. Ten (10) to fourteen (14) required per car.

$4.39/ea.
In Stock
Shock absorber bushing

p/n: 70-0541-33

Bushing, shock absorber mounting. Five eighths (5/8) inch hole, one and one fourth (1-1/4) inch outside diameter, five eighths (5/8) inch thick.

$4.49/ea.
In Stock
Battery hold down bracket pad

p/n: 20-2305-21

Pad, battery hold down bracket.

$4.59/ea.
Ships in 3-4 Days
Door bumper

p/n: 20-2366-71

Bumper, door jam.Qty Required:2 Two (2) required per car.

$4.59/ea.
In Stock
Filler and cushion strip

p/n: 70-1237-48

Filler and cushion strip, many applications. Five thirty seconds (5/32) inch by one and five eighths (1-5/8) inch.

$4.59/ft.
In Stock
Trunk floor pan plug

p/n: 35-0402-87

Plug, trunk floor pan construction holes, also rest pad for spare wheel area.

$4.59/ea.
In Stock
Sash Channel Filler 1/16 Rubber

p/n: 70-2170-57

Filler strip, window glass sash channel. One sixteenths (1/16) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherlip type of filler. This is the highest quality rubber like polymer designed for settin

$4.69/ft.
In Stock
Firewall grommet

p/n: 20-1611-20

Grommet, wiper hose through firewall.

$4.89/ea.
In Stock
Firewall grommet

p/n: 20-2300-20

Grommet, wiper hose firewall.

$4.89/ea.
Ships in 3-4 Days
Door bumper

p/n: 20-2109-71

Bumpers, door jam. Two (2) required per door.

$4.89/ea.
In Stock
Run Channel Clip

p/n: 60-0374-58

Clip, end of door window run channel. Tempered spring steel. Length: 1.8125 inches. Width: .50 inches.

$4.99/ea.
In Stock
Sash channel filler 1/16 cork

p/n: 70-1115-57

Filler strip, window glass sash channel. One sixteenths (1/16) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherstrip type of filler. This is the highest quality linen back, rubber cork composition on

$5.19/ft.
In Stock
Tie rod dust cover

p/n: 10-0134-32

Rubber seal, tie rod ends and drag link ends. 2 or 4 required per car. Note: for 4 cylinder vehicles.

$5.19/ea.
In Stock
Peel-N-Stick Door Weatherstrip

p/n: 70-0145-WT

Door edge weatherstrip made from high quality EPDM sponge rubber. 3M Peel-N-Stick backing provides superior adhesion for reliable performance. Excellent for use in many different applications and on many different vehicle models.

$5.39/ft.
In Stock
Utility Plug

p/n: 35-0099-20

Plug, utility, various uses.

$5.49/ea.
In Stock
Door Weatherstrip (Sponge Rubber Extrusion - General Use)

p/n: 70-0145-73

Door edge weatherstrip made from high quality EPDM sponge rubber. Excellent for use on many different vehicle models.

$5.49/ft.
In Stock
Door bumper

p/n: 20-0406-87

Bumpers, panel rear door check.

$5.49/pr.
Ships in 3-4 Days
Wheel cover cushion

p/n: 70-0633-38

Filler, wheel cover to wheel. Approximately two and one eighth (2-1/8) inches long each, twenty (20) required per car. (Five (5) per wheel cover).

$5.59/ea.
In Stock
Steering knuckle support seal

p/n: 50-0525-36

Seal, steering knuckle support, upper or lower. Die cut one fourth (1/4) inch, four (4) used per car.Height: .25 inches.

$5.59/ea.
In Stock
Glovebox link bumper

p/n: 70-1459-88

Bumper, glove box check link. Fits on glove box door arm as needed.Length: .75 inches. Width: .3125 inches. Height: .4375 inches.

$5.59/ea.
In Stock
Door Weatherstrip (Sponge Rubber Extrusion - General Use)

p/n: 70-0331-73

Door edge weatherstrip made from high quality EPDM sponge rubber. Excellent for use on many different vehicle models.

$5.79/ft.
In Stock
License plate mounting pad

p/n: 20-1557-45

Pad, rear license plate bracket. Cork.

$5.79/ea.
In Stock
Door weatherstrip

p/n: 70-0311-73

Weatherstrip, door edge, one half (1/2) inch by one half (1/2) inch cross-section. Exact match to original.Width: .50 inches. Height: .50 inches.

$5.79/ft.
In Stock
Roof Rail Weatherstrip

p/n: 70-1170-99

Weatherstrip, side roof rail. Three fourths inches (3/4") wide. Fits into metal channel retainer. See our #70-1172-65 and #70-1173-65 for cloth covering. Note: Order twelve feet (12') for two (2) door models, fourteen feet (14') for four (4) door

$5.89/ft.
In Stock
Channel filler weatherstrip

p/n: 70-0241-57

Weatherstrip, side window, double-lip seal type, used as filler for one fourth (1/4) inch glass in metal carrier channel.Width: .375 inches. Height: .

$5.89/ft.
In Stock
Window weatherstrip

p/n: 70-1194-52

Gasket, window, for models with plain "U" channel five eighths (5/8) inch high.

$5.89/ft.
In Stock
Window weatherstrip

p/n: 70-1192-52

Gasket, window, for models with chrome reveal molding.

$5.89/ft.
In Stock
Channel filler weatherstrip

p/n: 30-0154-57

Filler, for glass channel for convertible type windows with metal frame around one fourth (1/4) inch glass.Width: .4375 inches. Height: .50 inches.

$5.89/ft.
In Stock
Window weatherstrip

p/n: 70-1191-52

Gasket, window, for models without chrome reveal molding.

$5.89/ft.
In Stock
Channel filler weatherstrip

p/n: 30-0507-57

Seal, door window frame, upper and rear. Used on some open models with metal frame around glass.

$5.99/ft.
In Stock
Parking light lens gasket

p/n: 20-2297-16

Gaskets, parking light lens. Cork.

$5.99/pr.
Ships in 3-4 Days
Control arm bushing seal

p/n: 60-0094-32

Seal, upper and lower control arm cross shaft bushing, at inner end of arm.1939-48: Lower only, all pass. (exc.

$5.99/ea.
In Stock
Door bumper

p/n: 20-2362-70

Pads, striker plate.

$5.99/pr.
Ships in 3-4 Days
Windshield Weatherstrip

p/n: 70-1190-52

Channel, windshield, for windows without chrome reveal molding. (With 2 piece windshield, select gasket for division bar).

$5.99/ft.
In Stock
Peel-N-Stick Door Weatherstrip

p/n: 70-0331-WT

Door edge weatherstrip made from high quality EPDM sponge rubber. 3M Peel-N-Stick backing provides superior adhesion for reliable performance. Makes for an easier installation of door weatherstripping. Also excellent for use in many different applications and on many different vehicle models.

$5.99/ft.
In Stock
Channel filler weatherstrip

p/n: 70-0489-58

Weatherstrip, channel filler, door window sash channel and some quarter window sash channel. Special type with wide weatherstrip edge to be trimmed at assembly, when necessary.

$5.99/ft.
In Stock
Window weatherstrip

p/n: 30-0044-77

Channel, back window. Extra light, plain channel for one fourth (1/4") inch glass. Three thirty seconds (3/32") inch thick wall.Width: .4375 inches.

$5.99/ft.
In Stock
Spring shackle seal

p/n: 70-1125-33

Washer, front and rear spring shackle, seal for shackle pin. Constructed of neoprene.

$5.99/ea.
In Stock
Peel-N-Stick Door Edge Weatherstrip

p/n: 70-0390-WT

Door edge weatherstrip made from high quality EPDM sponge rubber. 3M Peel-N-Stick backing provides superior adhesion for reliable performance. Makes for an easier installation of door weatherstripping. Also excellent for use in many different applications and on many different vehicle models.

$6.19/ft.
In Stock
Body hole plug

p/n: 35-0863-45

Plug, body sheet metal holes. Used in various places (like trunks). For one and one half (1-1/2) inch hole in body.

$6.29/ea.
In Stock
Channel filler weatherstrip

p/n: 70-0075-57

Channel pad, window carrier, incorporating weatherstrip. Used for some side window lower channel.Width: .375 inches. Height: .6875 inches.

$6.39/ft.
In Stock
Universal mounting pad

p/n: 70-0308-17

Mounting pad, continuous for lights, hinges, brackets, and other bright work when no molded pad is available.

$6.39/ft.
In Stock
Door Weatherstrip (Sponge Rubber Extrusion - General Use)

p/n: 70-0390-73

Door edge weatherstrip made from high quality EPDM sponge rubber. Excellent for use on many different vehicle models.

$6.39/ft.
In Stock
Roof Rail Weatherstrip

p/n: 70-1171-99

Weatherstrip, side roof rail. Thirteen-sixteen inches (13/16") wide. Fits into metal channel retainer.

$6.49/ft.
In Stock
Brake cable anti-rub cover

p/n: 70-1701-24

Anti-rub cover, brake cable. Fits all models with seven sixteenths (7/16) inch outside diameter cable.Width: 2.0 inches.

$6.49/ea.
In Stock
Shock absorber arm bushing

p/n: 60-0106-32

Bushing, shock absorber arm link.

$6.49/ea.
In Stock
Pressure ring

p/n: 70-0261-69

Pressure ring (washer), sponge rubber, interior door handle and window regulator escutcheon. One and three fourths (1-3/4) inches outside diameter by three eighths (3/8) inch thick.

$6.49/ea.
In Stock
Radiator panel bumper

p/n: 33-0189-31

Bumper, lower radiator panel to grille, four (4) per car. Also used on radiator valance, two (2) per car in year 1941 only. Compare with our #33-0211-31. Also used as a bumper, hood tip panel to grille. Use 10 per car for 1939-1940 models. Use 8 per car

$6.49/ea.
In Stock
Front fender dust shield clip

p/n: 70-0681-44

Clip, front fender dust shield filler to frame. Spring tempered wire, to original configuration. Up to sixteen (16) per car required.Width: 3.0 inches.

$6.49/ea.
In Stock
Side roof rail weatherstrip

p/n: 70-0251-65

Weatherstrip, side window. Base fifteen sixteenths (15/16) inch wide but easily trims to more narrow channel if necessary.Width: .9375 inches.

$6.49/ft.
In Stock
Sun visor end plug

p/n: 70-0330-89

End plug, swing-type sun visor tube. Brown only.

$6.69/ea.
In Stock
Peel-N-Stick Trunk Weatherstrip

p/n: 30-0356-WT

This trunk weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body. Easy to install 3M Peel-N-Stick backing provides superior adhesion for reliable performance.

$6.69/ft.
In Stock
Door check link rod end stop

p/n: 70-0325-70

Pad, door check link. For rod type door check. One (1) inch diameter by three eighths (3/8) inch thick with five sixteenths (5/16) inch hole.

$6.69/ea.
In Stock
Dense Rubber Extrusion

p/n: 40-0053-99

Windshield, rear window and rear fixed quarter window weatherstrip. Typically used on cars without chrome reveal molding or others where reveal molding lays under the rubber lip. Vehicles typically need 12 foot for windshield, and 8 foot for either the re

$6.79/ft.
In Stock