Need Assistance?

We are here to help.

Call 800-447-0849

Search Results

130 items found matching 1940 Buick Special 2 door Business Coupe
Side Window Run Channel Kit

p/n: 90-0141-58

This ten (10) piece kit includes the inner and outer windowfelts, upper and lower rigid run channels, and flexible run channels needed to complete two (2) doors.

$262.69/set
Kit
Motor mount service

p/n: 50-0295-11

Motor mount, rear. Revulcanization service only.

$249.69/pr.
Call or Email
Front Door Vent Window Kit

p/n: 90-0366-90

This front door vent window weatherstrip kit is a four (4) piece set that contains the main vent window seals and division post seals. All of the pieces were designed from original parts for a precise, factory fit.

$213.99/set
Kit
Motor mount service

p/n: 50-0279-11

Motor mount, front. Two (2) per car. Revulcanization service only.

$188.29/pr.
Call or Email
Front Door Vent Window Weatherstrips

p/n: 38-0016-55

These front door vent window weatherstrips are the main seals needed to replace the rubber on your vent windows. They are designed and molded from original parts for superior fitment and seal.

$175.59/pr.
In Stock
Transmission mount service

p/n: 70-1934-25

Transmission mount. Revulcanization service only.

$172.29/set
Call or Email
Windshield Gasket

p/n: 50-0204-50

This windshield gasket mounts around the full perimeter of the front glass and has the divider bar molded directly into it for a precise, factory fit.

$164.39/ea.
In Stock
Transmission mount service

p/n: 50-0315-25

Mounting pad, transmission (also called insulator or support pad). Revulcanization service only.Length: 5.0 inches. Width: 3.4375 inches.

$150.99/ea.
In Stock
Rear Window Gasket

p/n: 60-0278-81

This rear window gasket is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the back glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation.

$143.49/ea.
In Stock
Front OR Rear Door Weatherstrip

p/n: 90-0128-72

Door weatherstrip. This set is the primary seal for the door to the body. Set contains two (2) seals for either the front or rear doors. Purchase two (2) sets if you need to complete all four (4) doors.

$132.49/set
In Stock
Rear Window Gasket

p/n: 60-0280-81

This rear window gasket is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the back glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation.

$125.99/ea.
Made to Order Takes 2-3 Days
Quarter window weatherstrip

p/n: 50-0282-77

Weatherstrip, fixed rear quarter window. Each vulcanized in one piece for ease of installation.

$119.59/pr.
Made to Order Takes 2-3 Days
Trunk Weatherstrip

p/n: 70-0796-84

This trunk weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk lid.

$103.89/ea.
In Stock
Accelerator pedal service

p/n: 50-0414-40

Pedal, accelerator. Revulcanization service only. Includes new rubber sockets for hinges.Length: 9.125 inches.

$95.89/ea.
Call or Email
Trunk Weatherstrip

p/n: 70-1128-84

This trunk weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk lid.

$94.19/ea.
In Stock
Fender welting 1/4" bead 50ft

p/n: 70-1098-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide. One fourth (1/4) inch bead, fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty five

$79.49/ea.
In Stock
Fender welting 3/16 bead 50ft

p/n: 70-1100-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide, three sixteenths (3/16) inch, fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty fi

$79.49/ea.
In Stock
Fender welting 50ft chrome

p/n: 70-1102-44

Welting, fender, bright chrome vinyl, three sixteenths (3/16) inch bead, one and one half (1-1/2) inch width. Superior quality. Fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty five (25) foot roll see #70-1101-44.

$79.49/ea.
In Stock
Brown steering floorplate

p/n: 50-0415-89

Floorplate, steering column. Brown rubber. For black see our #50-0415-36.Color:brown Length: 4.125 inches. Width: 4.125 inches.

$78.89/ea.
Made to Order Takes 2-3 Days
Steering column floorplate

p/n: 50-0415-36

Floorplate, steering column. Black rubber. For brown see our #50-0415-89.Length: 4.125 inches. Width: 4.125 inches.

$77.99/ea.
Made to Order Takes 2-3 Days
Fenderskirt edge seal

p/n: 70-0055-45

Seal, fenderskirt edge. Each five (5) foot long. Similar to our #20-0111-44, but thicker.Length: 60.0 inches. Width: .25 inches.

$74.89/pr.
In Stock
Parking light mounting pad

p/n: 50-0058-16

Pad, parking light (fender light).Width: 17.0 inches.

$67.59/pr.
In Stock
Front suspension bumper

p/n: 50-0125-32

Bumper, front suspension, lower arm.Width: 2.625 inches. Height: 2.5625 inches.

$66.79/pr.
In Stock
Front bumper grommet

p/n: 50-0043-28

Grommets, front bumper. Fully molded rubber. Five and three fourths inch (5-3/4") outside length by two and thirteen sixteenths inch (2-13/16") outside width by one and eleven sixteenths inch (1-11/16") inside hole length by nine sixteenths inch (9/16") i

$63.59/pr.
In Stock
Turn signal mounting pad

p/n: 50-0112-17

Mounting pad, turn signal.Width: 11.625 inches.

$63.39/ea.
In Stock
Rear bumper grommet

p/n: 50-0044-29

Grommets, rear bumper. Fully molded rubber. Four and three fourths inch (4-3/4") outside length by two and seven eighths inch (2-7/8") outside width by one and seven eighths inch (1-7/8") inside hole length by five eighths inch (5/8") inside hole width by

$62.69/pr.
In Stock
Stabilizer Bar End Link Set

p/n: 70-0567-34

Twenty-two (22) piece Stabilizer Bar End Link set for both sides of one (1) vehicle, fits front or rear bar. Order two (2) sets for vehicles with front and rear stabilizer bars. Hex head bolt. 5/16"-24NF x 7-5/8" long. Includes metal sleeves, cup washers and rubber grommets.

$61.99/set
In Stock
Rear stabilizer bushing

p/n: 50-0171-34

Bushings, rear stabilizer bar mounting. Fully molded rubber. One and one half inch (1 1/2") length by one and one fourth inch (1 1/4" outside diameter by nine sixteenths inch (9/16") inside hole diameter.

$61.69/pr.
Made to Order Takes 1-2 Days
Trunk bumper

p/n: 50-0163-87

Bumper, trunk. Brass core, screw held. Two (2) per car.Length: 1.5 inches. Width: .75 inches.

$60.69/pr.
In Stock
Rear coil spring pad

p/n: 50-0359-35

Insulators, rear coil spring. Fabric reinforced rubber as original. One (1) pair per car.

$56.39/pr.
In Stock
Headlight Door To Lens Seal

p/n: 70-0493-14

Headlight Door To Lens Seal - Molded without wire. Double lip type for sealed beam headlights. Note: Compare with our single lip type #70-0389-14 sold separately.

$54.29/pr.
In Stock
Rigid Run Channel

p/n: 70-0347-58

Stainless beaded edge, mohair-lined, exact replacement for rear side of division bar. Available in 15" pairs.

$54.29/pr.
In Stock
Flexible Run Channel

p/n: 70-1239-58

Cloth covered, mohair lined flexible metal channel for sides and top of door windows.

$52.19/ea.
In Stock
Beltline Weatherstrip

p/n: 70-0555-58

Weatherstrip, door window inner and outer, front and rear doors. Bend to fit. Available in a 3ft pair.

$51.59/pr.
In Stock
Headlight Door To Lens Seal

p/n: 70-0389-14

Headlight door to lens seal. Molded without wire. Single lip type for sealed beams.

$50.19/pr.
In Stock
Taillight mounting pad

p/n: 50-0052-15

Taillight mounting pad. Replaces #1309896-99.

$49.99/pr.
In Stock
Vent division bar weatherstrip

p/n: 70-0800-56

Front vent window division post seal. Fully molded with metal core and attaching tabs.

$49.89/pr.
In Stock
Front suspension bumper

p/n: 50-0091-32

Bumper, front suspension, upper arm.Height: 2.0 inches.

$49.79/pr.
In Stock
Brown brake and clutch pad

p/n: 50-0054-89

Pad, brake and clutch pedal. Brown rubber. For black see our part #50-0054-22. Perfect copy, fine detail.Color:brown Width: 3.125 inches.

$47.99/pr.
In Stock
Flexible Run Channel

p/n: 70-1238-58

Cloth covered, mohair lined flexible metal channel for sides and top of door windows.

$47.89/ea.
In Stock
Cowl vent hose

p/n: 50-0259-54

Hose, cowl vent gutter drain.Length: 7.0 inches.

$47.59/ea.
In Stock
Fender welting 1/4" bead 25ft

p/n: 70-1097-44

Welting, fender. Superior quality, proper construction of reinforced vinyl over vinyl core, one and three eighths (1-3/8) inch wide, black only. One fourth (1/4) inch bead, twenty five (25) foot roll. Typically used to attach two (2) fenders to body. For

$46.99/ea.
In Stock
Fender welting 25ft chrome

p/n: 70-1101-44

Welting, fender, bright chrome vinyl, three sixteenths (3/16) inch bead, one and one half (1-1/2) inch width. Superior quality. Twenty five (25) foot roll. Typically used to attach two (2) fenders to body. For fifty (50) foot roll see our #70-1102-44.

$46.99/ea.
In Stock
Sliding Quarter Window Weatherstrip

p/n: 70-0353-78

Weatherstrip, door window inner and outer, front and rear doors. Bend to fit. Available in a 6ft lengths.

$46.99/ea.
In Stock
Fender welting 3/16 bead 25ft

p/n: 70-1099-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide, three sixteenths (3/16) inch, twenty five (25) foot roll. Typially used for attaching two (2) fenders to body. For f

$45.19/ea.
In Stock
Headlight Mounting Pad

p/n: 70-0201-14

Headlight body mounting gasket. Rubber.

$44.49/pr.
In Stock
Horn button contact cushion

p/n: 50-0409-21

Separator, horn contact. For standard or non-flexible wheel.

$44.49/ea.
In Stock
Steel sash channel

p/n: 70-0641-58

Sash channel, side window glass. U-shaped steel channel only, no filler. Will require that you attach your own window regulator cam to underside as required.

$42.29/ea.
In Stock
Cowl vent weatherstrip

p/n: 70-0143-54

Gasket, cowl vent. Perfect copy of original, not a sponge substitute, top quality material.

$41.49/ea.
In Stock
Rigid Run Channel

p/n: 70-0516-58

Channel, rigid run, lower side window below beltline, zinc plated steel with black cloth lining. Available in 15" pairs.

$38.99/pr.
In Stock