Need Assistance?

We are here to help.

Call 800-447-0849

Search Results

94 items found matching 1940 Packard Super Eight 4 door Club Sedan
Runningboard matting

p/n: 30-0428-49

Runningboard matting. Fully molded with crowned blocks. Top quality rubber, flawless detail. No splicing or butting required.

$955.59/pr.
Made to Order Takes 1-2 Days
Runningboard trim strip

p/n: 30-0396-49

Trim strips, stainless steel, with retaining clips.

$840.99/set
Made to Order Takes 2-3 Days
Motor mount service

p/n: 30-0325-11

Motor mount (insulator assembly, support, rear), right and left. Revulcanization service only.

$260.29/pr.
Call or Email
Front Door Vent Window Kit

p/n: 90-0326-90

This front door vent window weatherstrip kit is a four (4) piece set that contains the main vent window seals and division post seals. All of the pieces were designed from original parts for a precise, factory fit.

$222.99/set
Kit
Windshield Gasket

p/n: 30-0281-50

This windshield gasket mounts around the full perimeter of the front glass and has the divider bar molded directly into it for a precise, factory fit.

$204.99/ea.
Made to Order Takes 2-3 Days
Windshield Gasket

p/n: 30-0280-50

This windshield gasket mounts around the full perimeter of the front glass and has the divider bar molded directly into it for a precise, factory fit.

$204.99/ea.
Made to Order Takes 2-3 Days
Front Door Vent Window Weatherstrips

p/n: 30-0015-55

These front door vent window weatherstrips are the main seals needed to replace the rubber on your vent windows. They are designed and molded from original parts for superior fitment and seal.

$185.59/pr.
In Stock
Rear Window Gasket Set

p/n: 30-0368-81

This rear window gasket set mounts around the two (2) separate back windows. They have vulcanized, or bonded, ends which means no cutting or splicing is required for installation.

$173.59/pr.
In Stock
Front suspension bumper

p/n: 30-0489-32

Bumper, front suspension (inside of coil spring). Made with three eighths (3/8) inch stud as original.

$161.79/pr.
In Stock
Spring shackle bushing

p/n: 30-0344-32

Bushing, rear spring and shackle. One and one eighth (1-1/8) inch diameter with nine sixteenths (9/16) inch hole. One set contains twelve (12) pieces.

$159.79/set
In Stock
Front suspension bushing

p/n: 30-0239-32

Bushings, front suspension torque arm. Necessary for proper front end geometry.

$119.49/pr.
In Stock
Transmission mount service

p/n: 30-0316-24

Insulator assembly, transmission support. Revulcanization service only. Send in your old core for service.

$116.89/ea.
Call or Email
Trunk Weatherstrip

p/n: 70-0083-85

This trunk weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.

$106.39/ea.
In Stock
Axle rebound pad

p/n: 30-0371-32

Bumper, rear frame to axle rubber. Two (2) per car.Length: 5.1875 inches. Width: 2.0625 inches.

$103.89/pr.
In Stock
Accelerator pedal service

p/n: 30-0474-41

Pad, accelerator pedal. Revulcanization service only.Length: 9.625 inches. Width: 1.9375 inches.

$101.19/ea.
Call or Email
Front spring bumper

p/n: 30-0087-32

Pads, rebound, front spring. Self retaining type.

$92.49/pr.
In Stock
Shifter relay boot

p/n: 30-0068-24

Boots, shifter relay shaft end support.

$89.99/pr.
Made to Order Takes 1-2 Days
Hood corner pad

p/n: 30-0010-42

Pads, hood rear corners. High quality rubber with metal core as original.Length: 3.4375 inches. Width: 1.875 inches.

$88.19/pr.
In Stock
Front spring bumper

p/n: 30-0120-32

Pads, front spring bumper rebound. Self retaining type.

$85.99/pr.
In Stock
Steering column grommet

p/n: 30-0348-36

Grommet, steering column at toe board.Length: 4.375 inches.

$84.49/ea.
In Stock
Rear bumper grommet

p/n: 30-0067-29

Grommets, rear bumper.Length: 4.3125 inches. Width: 2.6875 inches.

$82.29/pr.
Made to Order Takes 1-2 Days
Fender welting 1/4" bead 50ft

p/n: 70-1098-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide. One fourth (1/4) inch bead, fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty five

$79.49/ea.
In Stock
Fender welting 3/16 bead 50ft

p/n: 70-1100-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide, three sixteenths (3/16) inch, fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty fi

$79.49/ea.
In Stock
Fender welting 50ft chrome

p/n: 70-1102-44

Welting, fender, bright chrome vinyl, three sixteenths (3/16) inch bead, one and one half (1-1/2) inch width. Superior quality. Fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty five (25) foot roll see #70-1101-44.

$79.49/ea.
In Stock
Motor mount pad

p/n: 30-0267-11

Insulators, front engine support at timing gear cover.

$77.99/pr.
In Stock
Headlight door to lens seal

p/n: 30-0194-14

Gaskets, headlight rim (headlight door).

$76.49/pr.
In Stock
Red brake and clutch pedal pad

p/n: 30-0188-89

Pads, brake and clutch pedal, slip over type. Black and red rubber. For black only see our #30-0188-22.Length: 3.875 inches. Width: 2.875 inches.

$74.69/pr.
In Stock
Bumper grommet

p/n: 30-0039-28

Grommets, front or rear bumper. On models without trunk racks. Two (2) pair used per car if needing both front and rear bumpers. Three and five eighths inch (3-5/8") outside length by two and one fourth inch (2-1/4") outside width by one and five eighths

$72.99/pr.
In Stock
Prop shaft retainer bushing

p/n: 70-2268-27

Retainer, intermediate bearing. All models with two piece driveshafts.

$69.19/ea.
In Stock
Brake and clutch pedal pad

p/n: 30-0188-22

Pads, brake and clutch pedal, slip over type. Black rubber only. For black and red (semi-automatic clutch models) see our #30-0188-89.Length: 3.875 inches.

$67.89/pr.
In Stock
Suspension bushing

p/n: 30-0335-36

Bushing, insulator, torque arm to frame at rear. Four (4) piece set.

$63.89/set
In Stock
Suspension bushing

p/n: 30-0339-36

Bushing, insulator, front suspension lower support arm, inner. Four (4) piece set.

$63.89/set
In Stock
Door bumper

p/n: 34-0305-71

Bumper assembly, front door hinge, upper, stop. Two (2) per car, steel core as original.Height: .6875 inches.

$59.79/pr.
In Stock
Hood corner pad

p/n: 30-0037-42

Pads, hood front corner. Metal core, retained by single rivet.Length: 1.75 inches. Width: 1.375 inches.

$59.39/pr.
In Stock
Taillight mounting pad

p/n: 30-0318-15

Gaskets, taillight mounting, with proper beading and shape as original. For all models with center license mounting.Length: 7.125 inches.

$59.39/pr.
In Stock
Suspension bushing

p/n: 30-0341-36

Bushing, insulator, upper support arm, outer above steering knuckle support. Four (4) piece set.

$58.89/set
In Stock
Front stabilizer bushing

p/n: 30-0123-33

Bushings, front stabilizer mounting bracket. Fully molded rubber. One and seven sixteenths inch (1 7/16") length by one and five eighths inch (1 5/8") width by five eighths inch (5/8") inside hole diameter by one and eleven sixteenths inch (1 11/16") heig

$56.59/pr.
In Stock
Cowl vent gasket

p/n: 30-0050-54

Gasket, cowl vent. Perfect reproduction, high quality, original configuration, not a sponge substitute.Length: 14.0 inches. Width: 5.75 inches.

$55.79/ea.
In Stock
Handbrake pull rubber grip

p/n: 30-0322-24

Rubber grip, handbrake lever.Length: 4.125 inches.

$55.49/ea.
In Stock
Firewall grommet

p/n: 30-0070-21

Grommet instrument board cables through firewall. Oval type with masked hole for six (6) wires or cables. Necessary replacement for correct restoration.

$54.99/ea.
In Stock
Fuel neck grommet

p/n: 30-0038-41

Grommet, fuel filler neck.

$54.99/ea.
In Stock
Flexible Run Channel

p/n: 70-1108-57

Channel, flexible window run, un-beaded. Cloth covered mohair-lined type. Available in 6ft lengths.

$52.99/ea.
In Stock
Motor snubber pad

p/n: 30-0311-11

Insulator, engine snubber. One four (4) piece set required per car. Sold only in complete sets.

$52.89/set
Made to Order Takes 1-2 Days
Clutch control boot

p/n: 30-0273-24

Boot, clutch control unit governor.1940-42: Cars with Overdrive 1941-42: Cars with ElectromaticHeight: 1.125 inches.

$52.19/ea.
In Stock
Flexible Run Channel

p/n: 70-1239-58

Cloth covered, mohair lined flexible metal channel for sides and top of door windows.

$52.19/ea.
In Stock
Beltline Weatherstrip

p/n: 70-0555-58

Weatherstrip, door window inner and outer, front and rear doors. Bend to fit. Available in a 3ft pair.

$51.59/pr.
In Stock
Vent division bar weatherstrip

p/n: 70-2094-56

Front vent window division post seal. Fully molded with metal core and attaching tabs.

$49.19/pr.
In Stock
Brake and clutch shank seal

p/n: 30-0143-24

Boot, brake and clutch pedal shank at toe board.Length: 2.9375 inches.

$48.59/pr.
In Stock
Flexible Run Channel

p/n: 70-1238-58

Cloth covered, mohair lined flexible metal channel for sides and top of door windows.

$47.89/ea.
In Stock
Fender welting 1/4" bead 25ft

p/n: 70-1097-44

Welting, fender. Superior quality, proper construction of reinforced vinyl over vinyl core, one and three eighths (1-3/8) inch wide, black only. One fourth (1/4) inch bead, twenty five (25) foot roll. Typically used to attach two (2) fenders to body. For

$46.99/ea.
In Stock