Need Assistance?

We are here to help.

Call 800-447-0849

Search Results

83 items found matching 1940 Packard Super Eight Custom 4 door Formal Sedan
Motor mount service

p/n: 30-0325-11

Motor mount (insulator assembly, support, rear), right and left. Revulcanization service only.

$273.69/pr.
Call or Email
Windshield Gasket

p/n: 30-0281-50

This Windshield Gasket mounts around the full perimeter of the front glass and has the divider bar molded directly into it for a precise, factory fit.

$215.59/ea.
In Stock
Front suspension bumper

p/n: 30-0489-32

Bumper, front suspension (inside of coil spring). Made with three eighths (3/8) inch stud as original.

$171.79/pr.
In Stock
Front suspension bushing

p/n: 30-0239-32

Bushings, front suspension torque arm. Necessary for proper front end geometry.

$126.99/pr.
In Stock
Transmission mount service

p/n: 30-0316-24

Insulator assembly, transmission support. Revulcanization service only. Send in your old core for service.

$124.19/ea.
Call or Email
Trunk Weatherstrip

p/n: 70-0083-85

This Trunk Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.

$112.99/ea.
In Stock
Axle rebound pad

p/n: 30-0371-32

Bumper, rear frame to axle rubber. Two (2) per car.Length: 5.1875 inches. Width: 2.0625 inches.

$110.29/pr.
In Stock
Accelerator pedal service

p/n: 30-0474-41

Pad, accelerator pedal. Revulcanization service only.Length: 9.625 inches. Width: 1.9375 inches.

$107.49/ea.
In Stock
Front Spring Bumpers

p/n: 30-0087-32

This Front Spring Bumper pair is a quality reproduction of the original factory part. Self retaining type bumper manufactured with top quality materials.

$99.29/pr.
In Stock
Shifter relay boot

p/n: 30-0068-24

Boots, shifter relay shaft end support.

$96.59/pr.
Made to Order Takes 5-7 Days
Hood corner pad

p/n: 30-0010-42

Pads, hood rear corners. High quality rubber with metal core as original.Length: 3.4375 inches. Width: 1.875 inches.

$94.59/pr.
In Stock
Front Spring Bumpers

p/n: 30-0120-32

This Front Spring Bumper pair is a quality reproduction of the original factory part. Self retaining type bumper manufactured with top quality materials.

$92.29/pr.
In Stock
Steering column grommet

p/n: 30-0348-36

Grommet, steering column at toe board.Length: 4.375 inches.

$90.69/ea.
Made to Order Takes 5-7 Days
Rear bumper grommet

p/n: 30-0067-29

Grommets, rear bumper.Length: 4.3125 inches. Width: 2.6875 inches.

$88.39/pr.
Made to Order Takes 5-7 Days
Fender welting 1/4" bead 50ft

p/n: 70-1098-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide. One fourth (1/4) inch bead, fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty five

$85.39/ea.
In Stock
Fender welting 50ft chrome

p/n: 70-1102-44

Welting, fender, bright chrome vinyl, three sixteenths (3/16) inch bead, one and one half (1-1/2) inch width. Superior quality. Fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty five (25) foot roll see #70-1101-44.

$85.39/ea.
In Stock
Fender Welting with 3/16 Bead - 50 Ft. Roll

p/n: 70-1100-44

A superior quality Fender Welting material constructed of reinforced black vinyl over a vinyl core. Typically used for attaching four (4) fenders to body. Sold in a 50 foot roll.

$85.39/ea.
In Stock
Motor mount pad

p/n: 30-0267-11

Insulators, front engine support at timing gear cover.

$83.69/pr.
Made to Order Takes 5-7 Days
Headlight door to lens seal

p/n: 30-0194-14

Gaskets, headlight rim (headlight door).

$81.99/pr.
Made to Order Takes 5-7 Days
Red brake and clutch pedal pad

p/n: 30-0188-89

Pads, brake and clutch pedal, slip over type. Black and red rubber. For black only see our #30-0188-22.Length: 3.875 inches. Width: 2.875 inches.

$80.19/pr.
Made to Order Takes 5-7 Days
Bumper grommet

p/n: 30-0039-28

Grommets, front or rear bumper. On models without trunk racks. Two (2) pair used per car if needing both front and rear bumper grommets. Three and five eighths inch (3-5/8") outside length by two and one fourth inch (2-1/4") outside width by one and five eighths

$78.39/pr.
In Stock
Prop shaft retainer bushing

p/n: 70-2268-27

Retainer, intermediate bearing. All models with two piece driveshafts.

$74.19/ea.
In Stock
Brake and clutch pedal pad

p/n: 30-0188-22

Pads, brake and clutch pedal, slip over type. Black rubber only. For black and red (semi-automatic clutch models) see our #30-0188-89.Length: 3.875 inches.

$72.89/pr.
In Stock
Suspension bushing

p/n: 30-0339-36

Bushing, insulator, front suspension lower support arm, inner. Four (4) piece set.

$68.59/set
Made to Order Takes 5-7 Days
Door Bumper

p/n: 34-0305-71

Bumper assembly, front door hinge, upper, stop. Two (2) per car, steel core as original.Height: .6875 inches.

$64.29/pr.
In Stock
Hood corner pad

p/n: 30-0037-42

Pads, hood front corner. Metal core, retained by single rivet.Length: 1.75 inches. Width: 1.375 inches.

$63.79/pr.
In Stock
Taillight mounting pad

p/n: 30-0318-15

Gaskets, taillight mounting, with proper beading and shape as original. For all models with center license mounting.Length: 7.125 inches.

$63.79/pr.
In Stock
Suspension bushing

p/n: 30-0341-36

Bushing, insulator, upper support arm, outer above steering knuckle support. Four (4) piece set.

$63.19/set
Made to Order Takes 5-7 Days
Front stabilizer bushing

p/n: 30-0123-33

Bushings, front stabilizer mounting bracket. Fully molded rubber. One and seven sixteenths inch (1 7/16") length by one and five eighths inch (1 5/8") width by five eighths inch (5/8") inside hole diameter by one and eleven sixteenths inch (1 11/16") heig

$60.89/pr.
In Stock
Cowl vent gasket

p/n: 30-0050-54

Gasket, cowl vent. Perfect reproduction, high quality, original configuration, not a sponge substitute.Length: 14.0 inches. Width: 5.75 inches.

$59.79/ea.
In Stock
Handbrake pull rubber grip

p/n: 30-0322-24

Rubber grip, handbrake lever.Length: 4.125 inches.

$59.59/ea.
Made to Order Takes 5-7 Days
Firewall grommet

p/n: 30-0070-21

Grommet instrument board cables through firewall. Oval type with masked hole for six (6) wires or cables. Necessary replacement for correct restoration.

$58.99/ea.
In Stock
Fuel Neck Grommet

p/n: 30-0038-41

Grommet, fuel filler neck.

$58.99/ea.
In Stock
Flexible Run Channel - 6 Ft.

p/n: 70-1108-57

Channel, flexible window run, un-beaded. Cloth covered mohair-lined type. Available in 6ft lengths.

$56.89/ea.
In Stock
Motor snubber pad

p/n: 30-0311-11

Insulator, engine snubber. One four (4) piece set required per car. Sold only in complete sets.

$56.69/set
Made to Order Takes 5-7 Days
Clutch control boot

p/n: 30-0273-24

Boot, clutch control unit governor.1940-42: Cars with Overdrive 1941-42: Cars with ElectromaticHeight: 1.125 inches.

$55.99/ea.
In Stock
Flexible Run Channel

p/n: 70-1239-58

Cloth covered, mohair lined flexible metal channel for sides and top of door windows.

$55.99/ea.
In Stock
Beltline Weatherstrip

p/n: 70-0555-58

This Beltline Weatherstrip is sold as a three (3) foot pair. The beltline is used for side window inner and/or outer, front and/or rear doors. Available in a 3ft pair.

$55.49/pr.
In Stock
Brake and clutch shank seal

p/n: 30-0143-24

Boot, brake and clutch pedal shank at toe board.Length: 2.9375 inches.

$53.59/pr.
In Stock
Flexible Run Channel

p/n: 70-1238-58

Cloth covered, mohair lined flexible metal channel for sides and top of door windows.

$52.89/ea.
In Stock
Fender welting 1/4" bead 25ft

p/n: 70-1097-44

Welting, fender. Superior quality, proper construction of reinforced vinyl over vinyl core, one and three eighths (1-3/8) inch wide, black only. One fourth (1/4) inch bead, twenty five (25) foot roll. Typically used to attach two (2) fenders to body. For

$51.99/ea.
In Stock
Fender welting 25ft chrome

p/n: 70-1101-44

Welting, fender, bright chrome vinyl, three sixteenths (3/16) inch bead, one and one half (1-1/2) inch width. Superior quality. Twenty five (25) foot roll. Typically used to attach two (2) fenders to body. For fifty (50) foot roll see our #70-1102-44.

$51.99/ea.
In Stock
Fender Welting with 3/16 Bead - 25 Ft. Roll

p/n: 70-1099-44

A superior quality Fender Welting material constructed of reinforced black vinyl over a vinyl core. Typically used for attaching two (2) fenders to body. Sold in a 25 foot roll.

$49.99/ea.
In Stock
Flexible Run Channel

p/n: 70-1107-57

Cloth covered mohair-lined type. For sides and top of side windows. Available in 5ft lengths.

$49.49/ea.
In Stock
License light mounting pad

p/n: 30-0521-17

Pad, license light assembly to body.Length: 5.25 inches.

$46.19/ea.
In Stock
Brake and clutch shank seal

p/n: 30-0055-24

Seals, brake and clutch pedal shanks, against underside of floorboard.Length: 2.5625 inches. Width: 1.75 inches.

$44.79/pr.
In Stock
Lock cylinder gasket

p/n: 30-0022-71

Pads, door handle escutcheon.Width: 1.875 inches. Height: 1.375 inches.

$42.99/pr.
In Stock
Trunk handle mounting pad

p/n: 30-0515-87

Length: 4.6875 inches.

$40.99/ea.
Made to Order Takes 5-7 Days
Brown gearshift boot

p/n: 30-0069-89

Boot, gearshift on steering column. Brown rubber. For black see our #30-0069-36. Two and one eighth (2-1/8) inch long style.

$38.99/ea.
In Stock
Gearshift boot

p/n: 30-0069-36

Boot, gearshift on steering column. Black rubber. For brown see our #30-0069-89. Two and one eighth (2-1/8) inch long style.Length: 2.25 inches.

$31.99/ea.
In Stock