Search Results
Please click on the part name in red in order to get a complete description.
Rear Window Gasket
p/n: 60-0496-81
This rear window gasket is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the back glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation.
Coil spring insulator pad
p/n: 70-0801-32
Pad, coil spring insulator. Molded four (4) piece set for one (1) car.
Front or Rear Door Seals
p/n: 90-0130-72
Door edge weatherstrip. Two door seals. Used for the front doors on Chevrolet, Oldsmobile & Pontiac models. Also used for the front or rear doors on Buick models. If needing all four (4) door seals for Buick purchase two (2) pairs. This part is the primar
Rear window division bar seal
p/n: 70-0414-82
Pad set, back window division bar. Molded with screw clearances. Four (4) piece set.
License light mounting pad
p/n: 70-1222-17
Pad set, license light mount and lens gasket.Length: 12.625 inches.
Brown accelerator service
p/n: 70-1817-89
Accelerator pedal. Brown rubber. For black see our #70-1817-40. Revulcanization service only.Color:brown Length: 9.625 inches.
Taillight mounting pad
p/n: 50-0090-15
Mounting pad, taillight, right and left.Width: 10.5625 inches.
Door weatherstrip Kit
p/n: 20-1655-72
Door edge weatherstrip. This set is the primary door to body perimeter weatherstrip.
Parking light mounting pad
p/n: 30-0195-17
Gaskets, front parking light to fender.Length: 19.875 inches.
Motor mount service
p/n: 25-0062-11
Motor mount, upper front at cross member. One (1) per car. Revulcanization service only.Length: 4.75 inches. Width: 2.25 inches.
Taillight mounting pad
p/n: 50-0079-15
Mounting pad, taillight, right and left.Width: 10.5625 inches.
Taillight mounting pad
p/n: 50-0173-15
Pad, taillight mounting, right and left.Width: 10.5625 inches.
Taillight mounting pad
p/n: 50-0121-15
Mounting pads, taillights, right and left.Width: 10.5625 inches.
Parking light gasket
p/n: 70-0190-16
Gasket set, parking light and front turn signal. Four (4) piece set.
Taillight mounting pad
p/n: 30-0277-15
Gaskets, taillight to body. Molded left and right as original. Sold in complete sets only. Compare with our #30-0004-15.Length: 8.75 inches. Width: 3.
Trunk Weatherstrip
p/n: 20-1687-84
This trunk weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.
Trunk Weatherstrip
p/n: 70-1691-84
This trunk weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.
Roof rail filler
p/n: 70-0396-67
Fillers, side roof rail to front roof rail at front corner, right and left. Metal core, threaded for original screws.
Trunk Weatherstrip
p/n: 20-1686-84
This trunk weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.
Trunk Weatherstrip
p/n: 70-0874-84
This trunk weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.
Convertible top arm pad
p/n: 30-0441-67
Pad, convertible top to lock pillar. Molded left and right hand with metal core just like original.Width: 1.875 inches. Height: 1.625 inches.
License light mounting pad
p/n: 70-1220-17
Pad set, license light mount and lens gasket.Length: 12.0625 inches.
Trunk Weatherstrip
p/n: 70-0988-84
This trunk weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.
Accelerator pedal service
p/n: 30-0401-41
Pedal, accelerator. Revulcanization service only. Includes new rod ball socket and pivot. Original pattern tread.Length: 9.625 inches. Width: 1.9375 inches.
Coil wire sleeve
p/n: 14-0022-21
Sleeve, spark plug wires from distributor to wiring tube, rubber only.
License light mounting pad
p/n: 70-1223-17
Pad set, license light mount and lens gasket.Length: 12.625 inches.
Accelerator pedal service
p/n: 70-1660-40
Pedal, accelerator. Black rubber. Revulcanization service only. For brown see our #70-1660-89.Length: 9.0 inches.
Carpet heel plate
p/n: 40-0190-88
Heel pad. Black rubber. For brown see our #40-0190-89. To protect driver's side floor carpet.
Front Door Vent Window Kit
p/n: 90-0438-90
This front door vent window weatherstrip kit is a four (4) piece set that contains the main vent window seals and division post seals. The main seals are molded as a straight piece and designed from original parts for superior fitment and seal.
License light mounting pad
p/n: 70-3611-17
Pad, rear license light mounting. Replaces factory #902601.
Rigid run channel
p/n: 70-0536-58
Run channel, front door window, for full length of division bar (approximately twenty nine (29) inches). Rigid, bright beaded edge, mohair lined channel, die trimmed and formed at top.
Trunk Weatherstrip
p/n: 20-1685-84
This trunk weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.
Front Door Vent Window Weatherstrips
p/n: 20-1614-55
These front door vent window weatherstrips are the main seals needed to replace the rubber on your vent windows. They are molded as a straight piece and designed from original parts for superior fitment and seal.
Transmission mount service
p/n: 60-0407-25
Insulator (support), transmission mounting. Revulcanization service only.Length: 7.0625 inches.
Trunk Weatherstrip
p/n: 70-1129-84
This trunk weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk lid.
Rear window division bar seal
p/n: 70-0632-82
Weatherstrip, inner and outer, back window glass upright division bar. Set of four (4) pieces; two (2) outer, two 2) inner.Length: 11.50 inches.
Taillight mounting pad
p/n: 60-0144-15
Pads, taillight body mounting, right and left.Length: 6.0 inches.
Front bumper grommet
p/n: 30-0071-28
Grommets, front bumper. Proper hollow construction as original for good fit. Fully molded rubber. Five and one eighths inch (5-1/8") outside length by two and three eighths inch (2-3/8") outside width by one and five eighths inch (1-5/8") inside hole leng
Trunk Weatherstrip
p/n: 70-1690-84
This trunk weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.
Rear window division bar seal
p/n: 70-0246-82
Gasket set, back window divider post. Inner and outer, with mounting holes. Four (4) piece set.
Accelerator pedal service
p/n: 70-1813-40
Pedal, accelerator. Black rubber. For brown see our #70-1813-89. Revulcanization service only.Length: 11.0 inches.
Hinge seal
p/n: 70-0481-73
Filler, front door hinge pillar at dash, right and left. With metal core. Located at top front of front door, under door flange.
Windshield division bar gasket
p/n: 60-0128-52
Retainer, windshield division bar molding. Inner and outer. With threaded brass core as original (molding not included). Two (2) piece set.
Division bar grommet
p/n: 70-3135-62
Grommet, rear door vent divider post. Upper and lower, right and left. 4 piece set.
Radiator mounting pad
p/n: 30-0121-31
Grommet, radiator cradle to frame tie rod. 1st type, with locating boss. One four (4) piece set required per car. See also our #30-0309-31.
Motor mount pad
p/n: 30-0238-11
Cushions, motor support, at timing gear cover. One (1) pair required per car. Sold only in pairs.
Windshield Weatherstrip
p/n: 60-0447-50
This swing-out windshield gasket is designed from the original part for superior fitment and seal. The seal mounts into the metal channel attached to the glass and creates a seal when the glass is pressed against the body of the vehicle. It has vulcanized, or bonded, ends which means no cutting or splicing is required for installation.
Brown brake and clutch pad
p/n: 40-0121-89
Pads, brake and clutch pedal. Brown rubber. For black see our #40-0121-22. Oval style, perfect copy.
Convertible top arm pad
p/n: 70-1216-67
Pad, top folding post. Fastens on lower end of post with two (2) screws. Metal core, close copy.
Rear window division bar seal
p/n: 70-0999-82
Weatherstrip, rear window division bar inner and outer. Die cut to original dimensions.Length: 14.25 inches.
Fender welting 1/4" bead 50ft
p/n: 70-1098-44
Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide. One fourth (1/4) inch bead, fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty five
Fender welting 3/16 bead 50ft
p/n: 70-1100-44
Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide, three sixteenths (3/16) inch, fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty fi
Fender welting 50ft chrome
p/n: 70-1102-44
Welting, fender, bright chrome vinyl, three sixteenths (3/16) inch bead, one and one half (1-1/2) inch width. Superior quality. Fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty five (25) foot roll see #70-1101-44.
Windshield division bar gasket
p/n: 30-0146-52
Gasket, windshield division bar. Molded inner and outer, fully detailed.Length: 13.625 inches.
Brown accelerator service
p/n: 70-1660-89
Pedal, accelerator. Brown rubber. Revulcanization service only. For black see our #70-1660-40.Color:brown Length: 9.0 inches.
Fenderskirt Edge Seal
p/n: 70-0790-44
Fenderskirt Edge Seal - Two (2) strips six (6) feet long. Length: 72.0 inches. Width: 0.375 inches.
Rear Window Gasket
p/n: 20-1676-81
This rear window gasket is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the back glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation.
Brown brake and clutch pad
p/n: 40-0107-89
Pads, brake and clutch pedal. Brown rubber. For black see our #40-0107-22. Full slip over type to fit old pedal.
Heel plate
p/n: 70-3608-88
Heel plate to protect driver's side floor carpet. Identical to original. Only for models with carpet.
Brown accelerator pedal pad
p/n: 70-0208-89
Pad, accelerator pedal. Brown rubber. For black see our #70-0208-40. Made to slip over old metal core after removing old rubber.
Fenderskirt edge seal
p/n: 70-0055-45
Seal, fenderskirt edge. Each five (5) foot long. Similar to our #20-0111-44, but thicker.Length: 60.0 inches. Width: .25 inches.
Front bumper grommet
p/n: 50-0154-28
Grommets, front bumper. Fully molded rubber. Five and three fourths inch (5-3/4") outside length by two and thirteen sixteenths inch (2-13/16") outside width by two and five sixteenths inch (2-5/16") inside hole length by five eighths inch (5/8") inside h
Gravel shield
p/n: 30-0007-44
Gravel deflector, underside of runningboard at rear.Length: 7.125 inches.
Red brake and clutch pedal pad
p/n: 30-0188-89
Pads, brake and clutch pedal, slip over type. Black and red rubber. For black only see our #30-0188-22.Length: 3.875 inches. Width: 2.875 inches.
Taillight mounting pad
p/n: 30-0198-15
Mounting pad, taillight. With proper edging and shape, molded left and right. Sold only in complete pairs.Length: 9.75 inches.
Axle rebound pad
p/n: 70-0210-32
Bottoming pads, rear axle. Rubber block mounts by bracket to rear axle tube.
Stabilizer bushing
p/n: 70-0627-33
Bushings, stabilizer bar, front. Fully molded rubber. One and three fourths inch (1 3/4") length by one and one half inch (1 1/2") width by three fourths inch (3/4") inside hole diameter by one and five eighths inch (1 5/8") height.
Accelerator pedal service
p/n: 70-1817-40
Accelerator pedal. Black rubber. For brown see our #70-1817-89. Revulcanization service only.Length: 9.625 inches.
Convertible top arm pad
p/n: 70-1217-67
Pad, top folding post. Fastens on lower end of post with two (2) screws. Metal core, close copy.
Front Stabilizer Kit
p/n: 60-0221-33
Link kit, full replacement, front stabilizer bar link. Twenty two (22) piece set. Hex head bolt 5/16"-24NF x 6-3/8" long. Comes with metal sleeve, metal cup washers and rubber grommets.
Hood to cowl weatherstrip
p/n: 30-0049-42
Scuff pad, hood to cowl. Superior duplication of part with better rubber than original.Length: 8.25 inches.
Rigid run channel
p/n: 30-0023-57
Channel, rigid run, for division bar, un-beaded, plush lined, cloth covered, twenty four (24) inches long, channel size one half (1/2) inch outside width
Windshield division bar gasket
p/n: 70-0247-51
Gasket set, windshield divider post, inner and outer. Two (2) piece set with screw holes and pilots.
Shoe scraper mounting pad
p/n: 60-0325-45
Pad, mounting, boot scraper-to-front fender, right and left.Width: 3.25 inches.
Fenderskirt Edge Seal
p/n: 70-0154-45
Seal, fenderskirt edge, exact copy, trim notch for skirt lock at installation. Compare sketch with your original to be sure. Two (2), five (5) foot strips.
Side Window scraper seal
p/n: 60-0566-58
Weatherstrip, door window scraper seal, inner and outer. Slides into grove on top of the door's window opening and wipes the glass when window is raised and lowered. Customer will have to trim to length for proper fit. Four (4) piece set.
Hood bumper
p/n: 50-0326-42
Bumper, hood side pilot. Four (4) piece set required per car. Steel washer vulcanized inside rubber.
Prop shaft retainer bushing
p/n: 70-2268-27
Retainer, intermediate bearing. All models with two piece driveshafts.
Rear spring bumper
p/n: 60-0137-32
Bumper, rear spring. Fits original retainer.Width: 2.5625 inches.
Front bumper grommet
p/n: 40-0216-30
Grommets, front bumper. Fully molded rubber. Three and thirteen sixteenths inch (3-13/16") outside length by two and one fourth inch (2-1/4") outside width by one and eleven sixteenths inch (1-11/16") inside hole length by one half inch (1/2") inside hole
Sliding quarter window seal
p/n: 60-0398-78
Weatherstrip, sliding quarter window. Mounted vertically in body where leading edge of sliding window fits when closed. Right & left rubber only.
Trunk emblem mounting pad
p/n: 50-0113-17
Mounting pad, trunk ornament, excellent material and workmanship.Width: 11.8125 inches.
Brake and clutch pedal pad
p/n: 30-0188-22
Pads, brake and clutch pedal, slip over type. Black rubber only. For black and red (semi-automatic clutch models) see our #30-0188-89.Length: 3.875 inches.
Front bumper grommet
p/n: 60-0045-28
Grommet, front bumper. Fully molded rubber. Five and one fourths inch (5-1/4") outside length by two and one eighths inch (2-1/8") outside width by one and five eighths inch (1-5/8") inside hole length by seven sixteenths inch (7/16") inside hole width by
Rear bumper grommet
p/n: 70-2231-29
Grommets, rear support arm. Fully molded with all original details. Three and one half inch (3-1/2") outside length by two and one eighth inch (2-1/8") outside width by one and three fourths inch (1-3/4") inside hole length by one half inch (1/2") inside
Windowfelt weatherstrip
p/n: 20-0383-60
Side window horizontal seal (also known as beltline weatherstrip). These strips wipe the side windows when the glass is lowered. They come ready to install with finished ends and body curvature bends for a factory like appearance