Need Assistance?

We are here to help.

Call 800-447-0849

Search Results

80 items found matching 1941 Packard Super Eight Custom LeBaron 4 door Limousine
Motor mount service

p/n: 30-0325-11

Motor mount (insulator assembly, support, rear), right and left. Revulcanization service only.

$260.29/pr.
Call or Email
Rear quarter vent weatherstrip

p/n: 30-0249-77

Weatherstrip, rear quarter vent window. Full swing type.

$212.19/pr.
Made to Order Takes 1-2 Days
Rear Window Gasket

p/n: 30-0358-81

This rear window gasket mounts around the full perimeter of the back glass and has properly molded corners for a precise, factory fit.

$180.49/ea.
In Stock
Front suspension bumper

p/n: 30-0489-32

Bumper, front suspension (inside of coil spring). Made with three eighths (3/8) inch stud as original.

$161.79/pr.
In Stock
Spring eye bushing

p/n: 30-0372-32

Bushing, rear spring eye leaf and shackle. Nine sixteenths (9/16) inch inside diameter, one and three eighths (1-3/8) inch barrel.

$148.89/set
Made to Order Takes 1-2 Days
Front suspension bushing

p/n: 30-0239-32

Bushings, front suspension torque arm. Necessary for proper front end geometry.

$119.49/pr.
In Stock
Axle rebound pad

p/n: 30-0125-32

Bumpers, rear axle spring.Length: 5.375 inches. Width: 2.75 inches. Height: 2.1875 inches.

$118.39/pr.
Made to Order Takes 1-2 Days
Transmission mount service

p/n: 30-0316-24

Insulator assembly, transmission support. Revulcanization service only. Send in your old core for service.

$116.89/ea.
Call or Email
Motor mount service

p/n: 30-0317-11

Stabilizer assembly. Revulcanization service only.

$109.99/ea.
Call or Email
Steering column grommet

p/n: 30-0048-36

Grommet, steering column to instrument panel. Brown rubber only, excellent copy.Length: 5.0 inches. Width: 3.0 inches.

$107.59/ea.
Made to Order Takes 1-2 Days
Parking light mounting pad

p/n: 30-0195-17

Gaskets, front parking light to fender.Length: 19.875 inches.

$99.89/pr.
In Stock
Accelerator pedal service

p/n: 30-0401-41

Pedal, accelerator. Revulcanization service only. Includes new rod ball socket and pivot. Original pattern tread.Length: 9.625 inches. Width: 1.9375 inches.

$93.99/ea.
Call or Email
Front spring bumper

p/n: 30-0087-32

Pads, rebound, front spring. Self retaining type.

$92.49/pr.
In Stock
Shifter relay boot

p/n: 30-0068-24

Boots, shifter relay shaft end support.

$89.99/pr.
Made to Order Takes 1-2 Days
Front bumper grommet

p/n: 30-0071-28

Grommets, front bumper. Proper hollow construction as original for good fit. Fully molded rubber. Five and one eighths inch (5-1/8") outside length by two and three eighths inch (2-3/8") outside width by one and five eighths inch (1-5/8") inside hole leng

$85.49/pr.
Made to Order Takes 1-2 Days
Steering column grommet

p/n: 30-0348-36

Grommet, steering column at toe board.Length: 4.375 inches.

$84.49/ea.
In Stock
Fender welting 1/4" bead 50ft

p/n: 70-1098-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide. One fourth (1/4) inch bead, fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty five

$79.49/ea.
In Stock
Fender welting 3/16 bead 50ft

p/n: 70-1100-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide, three sixteenths (3/16) inch, fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty fi

$79.49/ea.
In Stock
Fender welting 50ft chrome

p/n: 70-1102-44

Welting, fender, bright chrome vinyl, three sixteenths (3/16) inch bead, one and one half (1-1/2) inch width. Superior quality. Fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty five (25) foot roll see #70-1101-44.

$79.49/ea.
In Stock
Motor mount pad

p/n: 30-0267-11

Insulators, front engine support at timing gear cover.

$77.99/pr.
In Stock
Headlight door to lens seal

p/n: 30-0194-14

Gaskets, headlight rim (headlight door).

$76.49/pr.
In Stock
Gravel shield

p/n: 30-0007-44

Gravel deflector, underside of runningboard at rear.Length: 7.125 inches.

$74.79/pr.
Made to Order Takes 1-2 Days
Red brake and clutch pedal pad

p/n: 30-0188-89

Pads, brake and clutch pedal, slip over type. Black and red rubber. For black only see our #30-0188-22.Length: 3.875 inches. Width: 2.875 inches.

$74.69/pr.
In Stock
Hood to cowl weatherstrip

p/n: 30-0049-42

Scuff pad, hood to cowl. Superior duplication of part with better rubber than original.Length: 8.25 inches.

$72.39/pr.
Made to Order Takes 2-3 Days
Prop shaft retainer bushing

p/n: 70-2268-27

Retainer, intermediate bearing. All models with two piece driveshafts.

$69.19/ea.
In Stock
Brake and clutch pedal pad

p/n: 30-0188-22

Pads, brake and clutch pedal, slip over type. Black rubber only. For black and red (semi-automatic clutch models) see our #30-0188-89.Length: 3.875 inches.

$67.89/pr.
In Stock
Headlight mounting pad

p/n: 30-0354-14

Gasket, headlight front assembly to fender. Between headlight bucket and the fender receiver hole. One (1) pair per car, sold only in pairs.

$65.19/pr.
In Stock
Fenderskirt edge seal

p/n: 20-0111-44

Pad, fenderskirt edge, similar to our #70-0055-45, but thinner. Approximately five (5) foot strip per skirt.Length: 60.0 inches. Width: .15625 inches.

$64.89/pr.
In Stock
Suspension bushing

p/n: 30-0339-36

Bushing, insulator, front suspension lower support arm, inner. Four (4) piece set.

$63.89/set
Made to Order Takes 1-2 Days
Front stabilizer bushing

p/n: 30-0363-33

Bearings or bushings, front stabilizer rod. One (1) pair used per vehicle. Fully molded rubber. One and nine sixteenths inch (1 9/16") length by one and nine sixteenths inch (1 9/16") width by three fourths inch (3/4") inside hole diameter by one and elev

$61.39/pr.
Made to Order Takes 1-2 Days
Door bumper

p/n: 34-0305-71

Bumper assembly, front door hinge, upper, stop. Two (2) per car, steel core as original.Height: .6875 inches.

$59.79/pr.
In Stock
Suspension bushing

p/n: 30-0341-36

Bushing, insulator, upper support arm, outer above steering knuckle support. Four (4) piece set.

$58.89/set
In Stock
Cowl vent gasket

p/n: 30-0050-54

Gasket, cowl vent. Perfect reproduction, high quality, original configuration, not a sponge substitute.Length: 14.0 inches. Width: 5.75 inches.

$55.79/ea.
In Stock
Hydraulic window lift boot

p/n: 30-0274-57

Boot, hydraulic window lifting cylinder, front and rear.

$54.39/ea.
Made to Order Takes 1-2 Days
Motor snubber pad

p/n: 30-0311-11

Insulator, engine snubber. One four (4) piece set required per car. Sold only in complete sets.

$52.89/set
In Stock
Clutch control boot

p/n: 30-0273-24

Boot, clutch control unit governor.1940-42: Cars with Overdrive 1941-42: Cars with ElectromaticHeight: 1.125 inches.

$52.19/ea.
In Stock
Vent division bar weatherstrip

p/n: 30-0530-56

Front vent window division post seal. Fully molded with metal core and attaching tabs.

$51.89/pr.
In Stock
Brake and clutch shank seal

p/n: 30-0143-24

Boot, brake and clutch pedal shank at toe board.Length: 2.9375 inches.

$48.59/pr.
In Stock
Flexible Run Channel

Cloth covered, mohair lined flexible metal channel for sides and top of door windows. Available in 5ft and 6ft lengths.

From $47.89/ea.
View
Beltline Weatherstrip

Weatherstrip, door window inner and outer, front and rear doors. Bend to fit. Available in a 3ft pair and 6ft piece.

From $46.99/ea.
View
Fender welting 1/4" bead 25ft

p/n: 70-1097-44

Welting, fender. Superior quality, proper construction of reinforced vinyl over vinyl core, one and three eighths (1-3/8) inch wide, black only. One fourth (1/4) inch bead, twenty five (25) foot roll. Typically used to attach two (2) fenders to body. For

$46.99/ea.
In Stock
Fender welting 25ft chrome

p/n: 70-1101-44

Welting, fender, bright chrome vinyl, three sixteenths (3/16) inch bead, one and one half (1-1/2) inch width. Superior quality. Twenty five (25) foot roll. Typically used to attach two (2) fenders to body. For fifty (50) foot roll see our #70-1102-44.

$46.99/ea.
In Stock
Fender welting 3/16 bead 25ft

p/n: 70-1099-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide, three sixteenths (3/16) inch, twenty five (25) foot roll. Typially used for attaching two (2) fenders to body. For f

$45.19/ea.
In Stock
Flexible Run Channel

Cloth covered mohair-lined type. For sides and top of side windows. Available in 5ft and 6ft lengths.

From $44.79/ea.
View
Electromatic Clutch Boot

p/n: 30-0337-24

Boot, valve, direct acting solenoid. Height: .75 inches.

$43.59/ea.
In Stock
Steering gear bushing

p/n: 30-0340-36

Bushing, steering gear lever ball stud (Pitman arm). Originally made in one piece as spool bushing, but replacements made in halves.

$41.59/set
In Stock
Antenna wire mount

p/n: 70-2263-19

Mount, radio antenna wire, under runningboard. Found on several models with factory type antennas that mount under the runningboard.

$38.89/ea.
In Stock
Brown gearshift boot

p/n: 30-0069-89

Boot, gearshift on steering column. Brown rubber. For black see our #30-0069-36. Two and one eighth (2-1/8) inch long style.

$35.29/ea.
In Stock
Gearshift boot

p/n: 30-0069-36

Boot, gearshift on steering column. Black rubber. For brown see our #30-0069-89. Two and one eighth (2-1/8) inch long style.Length: 2.25 inches.

$28.89/ea.
In Stock
Lock cylinder gasket

p/n: 30-0278-71

Gaskets, door lock handle.

$26.49/pr.
In Stock