Need Assistance?

We are here to help.

Call 800-447-0849

Search Results

70 items found matching 1942 Packard Super Eight 4 door Touring Sedan
Motor mount service

p/n: 30-0375-11

Insulator assembly, rear engine support at transmission housing. Revulcanization service only.

$290.19/pr.
Call or Email
Spring shackle bushing

p/n: 30-0344-32

Bushing, rear spring and shackle. One and one eighth (1-1/8) inch diameter with nine sixteenths (9/16) inch hole. One set contains twelve (12) pieces.

$183.39/set
In Stock
Front suspension bushing

p/n: 30-0239-32

Bushings, front suspension torque arm. Necessary for proper front end geometry.

$137.19/pr.
In Stock
Axle rebound pad

p/n: 30-0125-32

Bumpers, rear axle spring.Length: 5.375 inches. Width: 2.75 inches. Height: 2.1875 inches.

$135.79/pr.
Made to Order Takes 5-7 Days
Transmission mount service

p/n: 30-0316-24

Insulator assembly, transmission support. Revulcanization service only. Send in your old core for service.

$134.19/ea.
Call or Email
Motor mount service

p/n: 30-0317-11

Stabilizer assembly. Revulcanization service only.

$126.29/ea.
Call or Email
Steering column grommet

p/n: 30-0048-36

Grommet, steering column to instrument panel. Brown rubber only, excellent copy.Length: 5.0 inches. Width: 3.0 inches.

$123.49/ea.
Made to Order Takes 5-7 Days
Trunk Weatherstrip

p/n: 70-0083-85

This Trunk Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.

$121.99/ea.
In Stock
Parking light mounting pad

p/n: 30-0195-17

Gaskets, front parking light to fender.Length: 19.875 inches.

$115.89/pr.
In Stock
Peel-N-Stick Trunk Weatherstrip

p/n: 70-1690-WT

This Peel-N-Stick Trunk Weatherstrip is designed for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body. Easy to install 3M Peel-N-Stick backing provides superior adhesion for reliable performance.

$110.19/ea.
In Stock
Front Spring Bumpers

p/n: 30-0087-32

This Front Spring Bumper pair is a quality reproduction of the original factory part. Self retaining type bumper manufactured with top quality materials.

$109.29/pr.
In Stock
Accelerator pedal service

p/n: 30-0401-41

Pedal, accelerator. Revulcanization service only. Includes new rod ball socket and pivot. Original pattern tread.Length: 9.625 inches. Width: 1.9375 inches.

$108.99/ea.
Call or Email
Front bumper grommet

p/n: 30-0071-28

Grommets, front bumper. Proper hollow construction as original for good fit. Fully molded rubber. Five and one eighths inch (5-1/8") outside length by two and three eighths inch (2-3/8") outside width by one and five eighths inch (1-5/8") inside hole leng

$100.99/pr.
Made to Order Takes 5-7 Days
Steering column grommet

p/n: 30-0348-36

Grommet, steering column at toe board.Length: 4.375 inches.

$99.89/ea.
In Stock
Fender welting 1/4" bead 50ft

p/n: 70-1098-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide. One fourth (1/4) inch bead, fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty five

$93.99/ea.
In Stock
Fender welting 50ft chrome

p/n: 70-1102-44

Welting, fender, bright chrome vinyl, three sixteenths (3/16) inch bead, one and one half (1-1/2) inch width. Superior quality. Fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty five (25) foot roll see #70-1101-44.

$93.99/ea.
In Stock
Fender Welting with 3/16 Bead - 50 Ft. Roll

p/n: 70-1100-44

A superior quality Fender Welting material constructed of reinforced black vinyl over a vinyl core. Typically used for attaching four (4) fenders to body. Sold in a 50 foot roll.

$93.99/ea.
In Stock
Motor mount pad

p/n: 30-0267-11

Insulators, front engine support at timing gear cover.

$92.19/pr.
Made to Order Takes 5-7 Days
Headlight door to lens seal

p/n: 30-0194-14

Gaskets, headlight rim (headlight door).

$90.29/pr.
Made to Order Takes 5-7 Days
Heel plate

p/n: 70-3608-88

Heel plate to protect driver's side floor carpet. Identical to original. Only for models with carpet.

$88.49/ea.
Made to Order Takes 5-7 Days
Gravel Shield

p/n: 30-0007-44

Gravel deflector, underside of running board at rear. Length: 7.125 inches.

$88.39/pr.
Made to Order Takes 5-7 Days
Red brake and clutch pedal pad

p/n: 30-0188-89

Pads, brake and clutch pedal, slip over type. Black and red rubber. For black only see our #30-0188-22.Length: 3.875 inches. Width: 2.875 inches.

$88.29/pr.
In Stock
Hood to cowl weatherstrip

p/n: 30-0049-42

Scuff pad, hood to cowl. Superior duplication of part with better rubber than original.Length: 8.25 inches.

$85.69/pr.
Made to Order Takes 5-7 Days
Prop shaft retainer bushing

p/n: 70-2268-27

Retainer, intermediate bearing. All models with two piece driveshafts.

$81.69/ea.
In Stock
Brake and clutch pedal pad

p/n: 30-0188-22

Pads, brake and clutch pedal, slip over type. Black rubber only. For black and red (semi-automatic clutch models) see our #30-0188-89.Length: 3.875 inches.

$80.29/pr.
In Stock
Headlight mounting pad

p/n: 30-0354-14

Gasket, headlight front assembly to fender. Between headlight bucket and the fender receiver hole. One (1) pair per car, sold only in pairs.

$76.99/pr.
Made to Order Takes 5-7 Days
Fenderskirt edge seal

p/n: 20-0111-44

Pad, fenderskirt edge, similar to our #70-0055-45, but thinner. Approximately five (5) foot strip per skirt.Length: 60.0 inches. Width: .15625 inches.

$76.79/pr.
In Stock
Suspension bushing

p/n: 30-0339-36

Bushing, insulator, front suspension lower support arm, inner. Four (4) piece set.

$75.49/set
Made to Order Takes 5-7 Days
Door Bumper

p/n: 34-0305-71

Bumper assembly, front door hinge, upper, stop. Two (2) per car, steel core as original.Height: .6875 inches.

$70.79/pr.
In Stock
Suspension bushing

p/n: 30-0341-36

Bushing, insulator, upper support arm, outer above steering knuckle support. Four (4) piece set.

$69.59/set
Made to Order Takes 5-7 Days
Front stabilizer bushing

p/n: 30-0123-33

Bushings, front stabilizer mounting bracket. Fully molded rubber. One and seven sixteenths inch (1 7/16") length by one and five eighths inch (1 5/8") width by five eighths inch (5/8") inside hole diameter by one and eleven sixteenths inch (1 11/16") heig

$66.99/pr.
In Stock
Flexible Run Channel - 6 Ft.

p/n: 70-1108-57

Channel, flexible window run, un-beaded. Cloth covered mohair-lined type. Available in 6ft lengths.

$62.69/ea.
In Stock
Motor snubber pad

p/n: 30-0311-11

Insulator, engine snubber. One four (4) piece set required per car. Sold only in complete sets.

$62.49/set
Made to Order Takes 5-7 Days
Clutch control boot

p/n: 30-0273-24

Boot, clutch control unit governor.1940-42: Cars with Overdrive 1941-42: Cars with ElectromaticHeight: 1.125 inches.

$61.69/ea.
In Stock
Flexible Run Channel

p/n: 70-1239-58

Cloth covered, mohair lined flexible metal channel for sides and top of door windows.

$61.69/ea.
In Stock
Beltline Weatherstrip

p/n: 70-0555-58

This Beltline Weatherstrip is sold as a three (3) foot pair. The beltline is used for side window inner and/or outer, front and/or rear doors. Available in a 3ft pair.

$60.99/pr.
In Stock
Brake and clutch shank seal

p/n: 30-0143-24

Boot, brake and clutch pedal shank at toe board.Length: 2.9375 inches.

$58.99/pr.
In Stock
Flexible Run Channel

p/n: 70-1238-58

Cloth covered, mohair lined flexible metal channel for sides and top of door windows.

$58.29/ea.
In Stock
Fender welting 1/4" bead 25ft

p/n: 70-1097-44

Welting, fender. Superior quality, proper construction of reinforced vinyl over vinyl core, one and three eighths (1-3/8) inch wide, black only. One fourth (1/4) inch bead, twenty five (25) foot roll. Typically used to attach two (2) fenders to body. For

$57.29/ea.
In Stock
Fender welting 25ft chrome

p/n: 70-1101-44

Welting, fender, bright chrome vinyl, three sixteenths (3/16) inch bead, one and one half (1-1/2) inch width. Superior quality. Twenty five (25) foot roll. Typically used to attach two (2) fenders to body. For fifty (50) foot roll see our #70-1102-44.

$57.29/ea.
In Stock
Fender Welting with 3/16 Bead - 25 Ft. Roll

p/n: 70-1099-44

A superior quality Fender Welting material constructed of reinforced black vinyl over a vinyl core. Typically used for attaching two (2) fenders to body. Sold in a 25 foot roll.

$54.99/ea.
In Stock
Flexible Run Channel

p/n: 70-1107-57

Cloth covered mohair-lined type. For sides and top of side windows. Available in 5ft lengths.

$54.49/ea.
In Stock
Steering gear bushing

p/n: 30-0340-36

Bushing, steering gear lever ball stud (Pitman arm). Originally made in one piece as spool bushing, but replacements made in halves.

$50.69/set
In Stock
Antenna Wire Mount

p/n: 70-2263-19

Mount, radio antenna wire, under running board. Found on several models with factory type antennas that mount under the running board.

$47.39/ea.
In Stock
Brown gearshift boot

p/n: 30-0069-89

Boot, gearshift on steering column. Brown rubber. For black see our #30-0069-36. Two and one eighth (2-1/8) inch long style.

$42.99/ea.
In Stock
Gearshift boot

p/n: 30-0069-36

Boot, gearshift on steering column. Black rubber. For brown see our #30-0069-89. Two and one eighth (2-1/8) inch long style.Length: 2.25 inches.

$35.29/ea.
In Stock
Electrical terminal boot

p/n: 30-0279-41

Boot, electrical connection, generator terminal or ignition coil at engine.

$29.29/ea.
In Stock
Battery cable boot

p/n: 30-0374-21

Boot, battery cable at starter solenoid.

$28.69/ea.
In Stock
Battery clamp cover

p/n: 70-0095-21

Cover, battery clamp. Control unsightly sulfate buildup. Help protect the nearby metal and finish. Good copy from original part.Length: 3.5 inches.

$24.89/ea.
In Stock
Stabilizer grommet

p/n: 30-0310-33

Grommet, front or rear stabilizer links, lower. Fully molded rubber. One and three sixteenths inch (1 3/16") outside diameter by three eighths inch (3/8") inside hole diameter by three fourths inch (3/4") height. Used as a front stablizer for: 1940-50: P

$15.29/ea.
In Stock