Need Assistance?

We are here to help.

Call 800-447-0849

Search Results

69 items found matching 1942 Packard Super Eight Custom 4 door Touring Limousine
Motor mount service

p/n: 30-0375-11

Insulator assembly, rear engine support at transmission housing. Revulcanization service only.

$265.59/pr.
Call or Email
Spring eye bushing

p/n: 30-0372-32

Bushing, rear spring eye leaf and shackle. Nine sixteenths (9/16) inch inside diameter, one and three eighths (1-3/8) inch barrel.

$153.49/set
Made to Order Takes 1-2 Days
Front suspension bushing

p/n: 30-0239-32

Bushings, front suspension torque arm. Necessary for proper front end geometry.

$123.19/pr.
In Stock
Axle rebound pad

p/n: 30-0125-32

Bumpers, rear axle spring.Length: 5.375 inches. Width: 2.75 inches. Height: 2.1875 inches.

$121.99/pr.
Made to Order Takes 1-2 Days
Transmission mount service

p/n: 30-0316-24

Insulator assembly, transmission support. Revulcanization service only. Send in your old core for service.

$120.49/ea.
Call or Email
Motor mount service

p/n: 30-0317-11

Stabilizer assembly. Revulcanization service only.

$113.39/ea.
Call or Email
Steering column grommet

p/n: 30-0048-36

Grommet, steering column to instrument panel. Brown rubber only, excellent copy.Length: 5.0 inches. Width: 3.0 inches.

$110.89/ea.
Made to Order Takes 1-2 Days
Parking light mounting pad

p/n: 30-0195-17

Gaskets, front parking light to fender.Length: 19.875 inches.

$103.99/pr.
In Stock
Peel-N-Stick Trunk Weatherstrip

p/n: 70-1690-WT

This Peel-N-Stick Trunk Weatherstrip is designed for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body. Easy to install 3M Peel-N-Stick backing provides superior adhesion for reliable performance.

$98.89/ea.
In Stock
Accelerator pedal service

p/n: 30-0401-41

Pedal, accelerator. Revulcanization service only. Includes new rod ball socket and pivot. Original pattern tread.Length: 9.625 inches. Width: 1.9375 inches.

$97.79/ea.
Call or Email
Front spring bumper

p/n: 30-0087-32

Pads, rebound, front spring. Self retaining type.

$96.29/pr.
In Stock
Front bumper grommet

p/n: 30-0071-28

Grommets, front bumper. Proper hollow construction as original for good fit. Fully molded rubber. Five and one eighths inch (5-1/8") outside length by two and three eighths inch (2-3/8") outside width by one and five eighths inch (1-5/8") inside hole leng

$88.99/pr.
Made to Order Takes 1-2 Days
Steering column grommet

p/n: 30-0348-36

Grommet, steering column at toe board.Length: 4.375 inches.

$87.99/ea.
In Stock
Fender welting 1/4" bead 50ft

p/n: 70-1098-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide. One fourth (1/4) inch bead, fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty five

$82.79/ea.
In Stock
Fender welting 3/16 bead 50ft

p/n: 70-1100-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide, three sixteenths (3/16) inch, fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty fi

$82.79/ea.
In Stock
Fender welting 50ft chrome

p/n: 70-1102-44

Welting, fender, bright chrome vinyl, three sixteenths (3/16) inch bead, one and one half (1-1/2) inch width. Superior quality. Fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty five (25) foot roll see #70-1101-44.

$82.79/ea.
In Stock
Motor mount pad

p/n: 30-0267-11

Insulators, front engine support at timing gear cover.

$81.19/pr.
In Stock
Headlight door to lens seal

p/n: 30-0194-14

Gaskets, headlight rim (headlight door).

$79.59/pr.
Made to Order Takes 1-2 Days
Gravel Shield

p/n: 30-0007-44

Gravel deflector, underside of running board at rear. Length: 7.125 inches.

$77.89/pr.
Made to Order Takes 1-2 Days
Red brake and clutch pedal pad

p/n: 30-0188-89

Pads, brake and clutch pedal, slip over type. Black and red rubber. For black only see our #30-0188-22.Length: 3.875 inches. Width: 2.875 inches.

$77.79/pr.
In Stock
Hood to cowl weatherstrip

p/n: 30-0049-42

Scuff pad, hood to cowl. Superior duplication of part with better rubber than original.Length: 8.25 inches.

$75.39/pr.
Made to Order Takes 2-3 Days
Prop shaft retainer bushing

p/n: 70-2268-27

Retainer, intermediate bearing. All models with two piece driveshafts.

$71.99/ea.
In Stock
Brake and clutch pedal pad

p/n: 30-0188-22

Pads, brake and clutch pedal, slip over type. Black rubber only. For black and red (semi-automatic clutch models) see our #30-0188-89.Length: 3.875 inches.

$70.69/pr.
In Stock
Headlight mounting pad

p/n: 30-0354-14

Gasket, headlight front assembly to fender. Between headlight bucket and the fender receiver hole. One (1) pair per car, sold only in pairs.

$67.89/pr.
In Stock
Fenderskirt edge seal

p/n: 20-0111-44

Pad, fenderskirt edge, similar to our #70-0055-45, but thinner. Approximately five (5) foot strip per skirt.Length: 60.0 inches. Width: .15625 inches.

$67.59/pr.
In Stock
Suspension bushing

p/n: 30-0339-36

Bushing, insulator, front suspension lower support arm, inner. Four (4) piece set.

$66.49/set
Made to Order Takes 1-2 Days
Door Bumper

p/n: 34-0305-71

Bumper assembly, front door hinge, upper, stop. Two (2) per car, steel core as original.Height: .6875 inches.

$62.29/pr.
In Stock
Suspension bushing

p/n: 30-0341-36

Bushing, insulator, upper support arm, outer above steering knuckle support. Four (4) piece set.

$61.29/set
Made to Order Takes 1-2 Days
Front stabilizer bushing

p/n: 30-0123-33

Bushings, front stabilizer mounting bracket. Fully molded rubber. One and seven sixteenths inch (1 7/16") length by one and five eighths inch (1 5/8") width by five eighths inch (5/8") inside hole diameter by one and eleven sixteenths inch (1 11/16") heig

$58.99/pr.
In Stock
Hydraulic window lift boot

p/n: 30-0274-57

Boot, hydraulic window lifting cylinder, front and rear.

$56.69/ea.
Made to Order Takes 1-2 Days
Flexible Run Channel

p/n: 70-1108-57

Channel, flexible window run, un-beaded. Cloth covered mohair-lined type. Available in 6ft lengths.

$55.19/ea.
In Stock
Motor snubber pad

p/n: 30-0311-11

Insulator, engine snubber. One four (4) piece set required per car. Sold only in complete sets.

$54.99/set
Made to Order Takes 1-2 Days
Clutch control boot

p/n: 30-0273-24

Boot, clutch control unit governor.1940-42: Cars with Overdrive 1941-42: Cars with ElectromaticHeight: 1.125 inches.

$54.39/ea.
In Stock
Flexible Run Channel

p/n: 70-1239-58

Cloth covered, mohair lined flexible metal channel for sides and top of door windows.

$54.39/ea.
In Stock
Beltline Weatherstrip

p/n: 70-0555-58

Weatherstrip, door window inner and outer, front and rear doors. Bend to fit. Available in a 3ft pair.

$53.79/pr.
In Stock
Brake and clutch shank seal

p/n: 30-0143-24

Boot, brake and clutch pedal shank at toe board.Length: 2.9375 inches.

$51.99/pr.
In Stock
Flexible Run Channel

p/n: 70-1238-58

Cloth covered, mohair lined flexible metal channel for sides and top of door windows.

$51.29/ea.
In Stock
Fender welting 1/4" bead 25ft

p/n: 70-1097-44

Welting, fender. Superior quality, proper construction of reinforced vinyl over vinyl core, one and three eighths (1-3/8) inch wide, black only. One fourth (1/4) inch bead, twenty five (25) foot roll. Typically used to attach two (2) fenders to body. For

$50.39/ea.
In Stock
Fender welting 25ft chrome

p/n: 70-1101-44

Welting, fender, bright chrome vinyl, three sixteenths (3/16) inch bead, one and one half (1-1/2) inch width. Superior quality. Twenty five (25) foot roll. Typically used to attach two (2) fenders to body. For fifty (50) foot roll see our #70-1102-44.

$50.39/ea.
In Stock
Fender welting 3/16 bead 25ft

p/n: 70-1099-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide, three sixteenths (3/16) inch, twenty five (25) foot roll. Typially used for attaching two (2) fenders to body. For f

$48.49/ea.
In Stock
Flexible Run Channel

p/n: 70-1107-57

Cloth covered mohair-lined type. For sides and top of side windows. Available in 5ft lengths.

$47.99/ea.
In Stock
Steering gear bushing

p/n: 30-0340-36

Bushing, steering gear lever ball stud (Pitman arm). Originally made in one piece as spool bushing, but replacements made in halves.

$44.59/set
Made to Order Takes 1-2 Days
Antenna Wire Mount

p/n: 70-2263-19

Mount, radio antenna wire, under running board. Found on several models with factory type antennas that mount under the running board.

$41.69/ea.
In Stock
Brown gearshift boot

p/n: 30-0069-89

Boot, gearshift on steering column. Brown rubber. For black see our #30-0069-36. Two and one eighth (2-1/8) inch long style.

$37.89/ea.
In Stock
Gearshift boot

p/n: 30-0069-36

Boot, gearshift on steering column. Black rubber. For brown see our #30-0069-89. Two and one eighth (2-1/8) inch long style.Length: 2.25 inches.

$30.99/ea.
In Stock
Electrical terminal boot

p/n: 30-0279-41

Boot, electrical connection, generator terminal or ignition coil at engine.

$25.69/ea.
In Stock
Battery cable boot

p/n: 30-0374-21

Boot, battery cable at starter solenoid.

$25.29/ea.
In Stock
Battery clamp cover

p/n: 70-0095-21

Cover, battery clamp. Control unsightly sulfate buildup. Help protect the nearby metal and finish. Good copy from original part.Length: 3.5 inches.

$21.89/ea.
In Stock
Stabilizer grommet

p/n: 30-0310-33

Grommet, front or rear stabilizer links, lower. Fully molded rubber. One and three sixteenths inch (1 3/16") outside diameter by three eighths inch (3/8") inside hole diameter by three fourths inch (3/4") height. Used as a front stablizer for: 1940-50: P

$13.29/ea.
In Stock
Dimmer switch grommet

p/n: 40-0083-88

Grommet, dimmer switch for carpet application.

$12.89/ea.
In Stock