Search Results
Please click on the part name in red in order to get a complete description.
Firewall grommet
p/n: 32-0158-17
Grommet, hand brake cable through firewall. Sheet Metal Hole: 9/16" Center Hole: 5/16" Outside Diameter: 13/16" Slot Width: 1/16"
Standard bumper
p/n: 33-0730-42
Bumper, hood ornament base. One (1) per car. Self retain.Cadillac 1939-48 Bumper, rubber, hood ornament base. 1 per car.
Wiring grommet
p/n: 32-0401-45
Grommet, license light wire through trunk inner panel. Sheet Metal Hole: 1" Center Hole: 3/8" Outside Diameter: 1-1/4" Slot Width: 1/16"
Chrome molding washer
p/n: 60-0727-45
Washer, for attaching chrome moldings on body. Fits into metal cup retainer. Three fourths (3/4) inch diameter, use as required.
Glovebox bumper
p/n: 20-2391-88
Bumpers, glovebox door.Ford Cars 1960 Bumpers, fuel tank door. All Galaxie models. Ford Truck 1935-47 Bumpers, glovebox door.
Firewall grommet
p/n: 20-1561-20
Grommet, choke and throttle rod or hood pull cable firewall.1932-47: All Trucks for choke & throttle rod; 1957-63: All Trucks for choke & wiper.
Hood Bumper
p/n: 33-0003-42
Bumper, hood, 2 uses. Hood to radiator shell at side panel, Hood to fender, as required. Up to ten (10) required per car.Buick requires six (6) per car.
Firewall grommet
p/n: 32-0438-20
Grommet, headlight wires through inner wheelhouse panel, two (2) per car. Sheet Metal Hole: 3/4" Center Hole: 1/2" Outside Diameter: 1" Slot Width: 3/32"
Window channel retaining clip
p/n: 70-0515-62
Clip, side window run channel retaining. Rust resistant spring steel.Width: .4375 inches. Height: .8125 inches.
Wiring grommet
p/n: 32-0369-20
Grommet, wiring harness through fender skirts, or hood latch lower mounting panels. Also other miscellaneous uses. Sheet Metal Hole: 1-1/16" Center Hole: 3/4" Outside Diameter: 1-3/8" Slot Width: 1/16"
Trunk or hood bumper
p/n: 34-0203-42
Bumper, trunk or hood. Molded with clearance for screw. Used for: Buick 1942-50 Bumper for trunk. Chevrolet 1949-55 Bumper for rear hood corners on cowl. Chevrolet 1949-50 Bumper for trunk. Oldsmobile 1938 Bumper under hood corner on radi
Shock Absorber Arm Bushing
p/n: 60-0216-33
Bushing, for double acting shock absorber arm link. Height: .78125 inches.
Window channel retaining clip
p/n: 70-0514-62
Clip, side window run channel retaining. Rust resistant spring steel. Compare with your original.Width: .4375 inches. Height: .9375 inches.
Hood & Door bumper
p/n: 33-0459-42
Bumper, hood to cowl and door hinge pillar upper. May be used in both places.
Hood bumper
p/n: 70-0294-42
Bumper, hood rest, cap type for adjustable screw, fifteenth sixteenths (15/16) inch, seven sixteenths (7/16) inch thick.
Wiring grommet
p/n: 32-0366-53
Grommet, windshield wiper control cable or gas gauge wire through rear compartment pan. Sheet Metal Hole: 7/16" Center Hole: 1/8" Outside Diameter: 5/8" Slot Width: 1/16"
Gearshift grommet
p/n: 32-0050-24
Grommet, insulator, gearshift control rod. Sheet Metal Hole: 11/16" Center Hole: 15/32" Outside Diameter: 3/4" Slot Width: 1/4"
Gravel shield bumper
p/n: 33-0016-45
Bumper, gravel deflector. Self retaining, round button style, used as anti-rattle to front bumper support bar, two (2) car.
Body Hole Plug
p/n: 20-1040-21
Plug, hole in dog leg cover. Installs at front of door where bolt to adjust vent window frame is located. This body plug covers a sheet metal hole that is one and one half (1-1/2) inch in diameter.
Body Hole Plug
p/n: 20-1039-21
Plug, cowl and floor pan. This body plug covers a sheet metal hole that is one and one fourth (1-1/4) inch in diameter.
Trunk floor pan plug
p/n: 35-0070-87
Plug, trunk and floor pan drain hole. Buick 1950-65 Plug, trunk and floor pan drain hole.
Wiring grommet
p/n: 32-0352-20
Grommet, parking brake release rod. Sheet Metal Hole: 3/8" Center Hole: 1/4" Outside Diameter: 9/16" Slot Width: 1/16"
Gearshift bushing
p/n: 32-0051-24
Insulator (bushing). Gearshift selector rod. Sheet Metal Hole: 9/16" Center Hole: 3/8" Outside Diameter: 5/8" Slot Width: 5/32"
Sash channel weatherstrip
p/n: 70-0585-58
Weatherstrip, sash channel, outer, for side windows, one half (1/2) inch wide weatherlip (cross section).Width: .50 inches.
Side window lift limit cap
p/n: 60-0071-62
Caps, side window lift limit. Rubber, snap-over type, three fourths (3/4) inch diameter by five sixteenths (5/16) inch thick.
Hood rest pad
p/n: 33-0116-42
Pad, hood rest across cowl. Button style with self retainer. Eleven (11) required per car.
Firewall grommet
p/n: 32-0263-17
Grommet, license light wire through body. Sheet Metal Hole: 3/4" Center Hole: 5/16" Outside Diameter: 1" Slot Width: 1/16"
Sash channel filler 1/32 cork
p/n: 70-1114-57
Filler strip, window glass sash channel. One thirty seconds (1/32) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherlip type of filler. This is the highest quality linen back, rubber cork composition
Sash Channel Filler 1/32 Rubber
p/n: 70-2169-57
Filler strip, window glass sash channel. One thirty seconds (1/32) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherlip type of filler.
Filler and cushion strip
p/n: 70-1236-48
Filler and cushion strip, many applications. One sixteenth (1/16) inch by one and three eighths (1-3/8) inch.
Shock absorber bushing
p/n: 70-0541-33
Bushing, shock absorber mounting. Five eighths (5/8) inch hole, one and one fourth (1-1/4) inch outside diameter, five eighths (5/8) inch thick.
Side window bumper
p/n: 70-3428-62
Pad, side window inside anti-rattle. Three eights (3/8) inch by one (1) inch for three sixteenths (3/16) inch by three fourths (3/4) inch slot in sheet metal. Six (6) required per truck
Trunk floor pan plug
p/n: 35-0402-87
Plug, trunk floor pan construction holes, also rest pad for spare wheel area.
Taillight bumper
p/n: 33-0556-15
Bumper, taillight body upper half and fuel filler cover to lower half. Four (4) required per car.
Filler and cushion strip
p/n: 70-1237-48
Filler and cushion strip, many applications. Five thirty seconds (5/32) inch by one and five eighths (1-5/8) inch.
Sash Channel Filler 1/16 Rubber
p/n: 70-2170-57
Filler strip, window glass sash channel. One sixteenths (1/16) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherlip type of filler. This is the highest quality rubber like polymer designed for settin
Wiring grommet
p/n: 32-0003-21
Grommet, for electrical wires, smaller applications. Sheet Metal Hole: 11/16" Center Hole: 5/16" Outside Diameter: 1" Slot Width: 1/16"
Taillight lens gasket
p/n: 70-3770-15
Gaskets, tail light lens. Die cut cork to authentic original dimensions.
Body mounting pad
p/n: 20-0458-48
Bushings, rear of cab to frame suspension arm. Set of four (4) pieces.
Wiring grommet
p/n: 32-0002-21
Grommet, for electrical wires, many applications. Sheet Metal Hole: 7/8" Center Hole: 13/32" Outside Diameter: 1-1/16" Slot Width: 1/16"
Radiator panel bumper
p/n: 33-0211-31
Bumper, lower radiator panel to grille, four (4) per car. Also used on radiator valance, two (2) per car. Compare with our #33-0189-31.
Headlight grommet
p/n: 32-0437-20
Grommet, horn and headlight wires crossover through radiator shroud. Two (2) per car. Sheet Metal Hole: 1-1/16" Center Hole: 7/16" Outside Diameter: 1-3/8" Slot Width: 1/16"
Hood bumper
p/n: 33-0542-42
Pad, hood side to fender. Button type, fits five sixteenths (5/16) inch hole, self retaining.
Firewall grommet
p/n: 32-0112-20
Grommet, firewall utility, for handbrake cable, heater control cable, and others. Sheet Metal Hole: 11/16" Center Hole: 1/4" Outside Diameter: 1-3/16" Slot Width: 1/16"
Run Channel Clip
p/n: 60-0374-58
Clip, end of door window run channel. Tempered spring steel. Length: 1.8125 inches. Width: .50 inches.
Power top cylinder spacer
p/n: 70-0822-67
Spacer, folding top power cylinder support. Four (4) used per car.
Firewall grommet
p/n: 32-0492-14
Grommet, headlight cable through fender. Sheet Metal Hole: 1" Center Hole: 11/16" Outside Diameter: 1-1/4" Slot Width: 1/16"
Gravel shield bumper
p/n: 33-0286-30
Bumper, rear gravel shield, anti-rattle. Five (5) or more used per car. Fully molded rubber. Seven eighths inch (7/8") length by five eighths inch (5/8") width by five eighths inch (5/8") height.
Wiring grommet
p/n: 32-0439-20
Grommet, various uses. Sheet Metal Hole: 1" Center Hole: 7/16" Outside Diameter: 1-5/16" Slot Width: 1/16"
Motor mount pad
p/n: 20-0442-11
Washer, front upper motor mount. Used between mount and frame. Two (2) per truck.
Sash channel filler 1/16 cork
p/n: 70-1115-57
Filler strip, window glass sash channel. One sixteenths (1/16) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherstrip type of filler. This is the highest quality linen back, rubber cork composition on
Tie rod dust cover
p/n: 10-0134-32
Rubber seal, tie rod ends and drag link ends. 2 or 4 required per car. Note: for 4 cylinder vehicles.
Body Hole Plug
p/n: 20-1041-21
Plug, cowl and floor pan. This body plug covers a sheet metal hole that is one and one seven eighths (1-7/8) inch in diameter.
Door Weatherstrip (Sponge Rubber Extrusion - General Use)
p/n: 70-0145-73
Door edge weatherstrip made from high quality EPDM sponge rubber. Excellent for use on many different vehicle models.
Steering knuckle support seal
p/n: 50-0525-36
Seal, steering knuckle support, upper or lower. Die cut one fourth (1/4) inch, four (4) used per car.Height: .25 inches.
Door weatherstrip
p/n: 70-0311-73
Weatherstrip, door edge, one half (1/2) inch by one half (1/2) inch cross-section. Exact match to original.Width: .50 inches. Height: .50 inches.
Door weatherstrip
p/n: 70-0219-73
Weatherstrip, door edge, constant section on some models. Five eighths (5/8) inch by (5/8) inch cross-section, high grade, fine grain sponge rubber.
Shock absorber grommet
p/n: 60-0235-33
Grommet, shock absorber mounting, plain cylinder type with flat ends.
Peel-N-Stick Door Weatherstrip
p/n: 70-0145-WT
Door edge weatherstrip made from high quality EPDM sponge rubber. 3M Peel-N-Stick backing provides superior adhesion for reliable performance. Excellent for use in many different applications and on many different vehicle models.
Door Weatherstrip (Sponge Rubber Extrusion - General Use)
p/n: 70-0331-73
Door edge weatherstrip made from high quality EPDM sponge rubber. Excellent for use on many different vehicle models.
Battery strap grommet
p/n: 32-0491-21
Grommet, battery retaining hold-down bolt. Two (2) used per car. Sheet Metal Hole: 9/16" Center Hole: 3/8" Outside Diameter: 15/16" Slot Width: 5/32"
Door Weatherstrip (Sponge Rubber Extrusion - General Use)
p/n: 40-0480-73
Door edge weatherstrip made from high quality EPDM sponge rubber. Excellent for use on many different vehicle models.
Rear quarter window bumper
p/n: 50-0399-62
Bumper, rear quarter window stop (lower) on window guide. Both upper and lower on some models. Three fourths (3/4) inch high. Compare to our #50-0400-62.
Channel filler weatherstrip
p/n: 70-0241-57
Weatherstrip, side window, double-lip seal type, used as filler for one fourth (1/4) inch glass in metal carrier channel.Width: .375 inches. Height: .
Door Weatherstrip (Sponge Rubber Extrusion - General Use)
p/n: 50-0085-73
Door edge weatherstrip made from high quality EPDM sponge rubber. Excellent for use on many different vehicle models.
Door garnish molding pad
p/n: 30-0435-71
Support, door garnish molding. Up to twenty (20) required per car.Width: .875 inches. Height: 1.0 inches.
Window Gasket Weatherstrip
p/n: 60-0059-83
This window gasket weatherstrip was designed from an original part for a specific application but has many uses outside of its original purpose. The seal is structured to be used with 1/4" glass in a 3/8" channel. Most often used for rear quarter windows and rear windows.
Channel filler weatherstrip
p/n: 70-0489-58
Weatherstrip, channel filler, door window sash channel and some quarter window sash channel. Special type with wide weatherstrip edge to be trimmed at assembly, when necessary.